PREDICTION OF INTACT ROCK’S ELASTICITY MODULUS BASED ON UNIAXIAL COMPRESSIVE STRENGTH
Journal Name:
- İstanbul Yerbilimleri Dergisi
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
The modulus of elasticity (Ei) is an important parameter which is used in the planning of several engineering
projects such as tunneling, mining excavations and slope stability analysis. However, it is usually difficult to determine the
modulus of elasticity directly and high-quality cores are necessary for the experimental studies. For this reason, indirect
methods have been recommended for estimating the modulus of elasticity. The most significant deficiency of these methods
aiming at estimate for the modulus of elasticity by using different statistical techniques is that some of them are based on
insufficient data. In this study, the relationship between the uniaxial compressive strength (UCS) and the elasticity modulus of
rocks in different lithologies was investigated by using 441 data obtained from the Istanbul metro excavations. As a result, a
satisfactory relationship between the modulus of elasticity and the compressive strength was found and the modulus of
elasticity could be estimated by using the proposed predictor equations.
Bookmark/Search this post with
Abstract (Original Language):
Elastisite modülü (Ei) tünel ve madencilik kazıları ile kaya şev stabilitesi analizi gibi pek çok mühendislik projesinin
tasarımında kullanılan önemli bir parametredir. Elastisite modülünün doğrudan belirlenebilmesi güç olup, deney için yüksek
kalitede karotlar gerekmektedir. Bu nedenle elastisite modülünün tayini için dolaylı yollara da başvurulmaktadır. Literatürde
değişik istatistiksel yöntemleri kullanarak elastisite modülünün kestirimini amaçlayan bu yöntemlerin en önemli eksikliği az
sayıda veriye dayanmalarıdır. Bu çalışmada, İstanbul’daki metro kazıları kapsamında yapılan sondajlardan alınan karotlardan
elde edilen 441 adet veri kullanılarak değişik litolojilerdeki kayaçların tek eksenli basınç dayanımları (UCS) ile elastisite
modülü arasındaki ilişki araştırılmıştır. Sonuçta, tek eksenli basınç dayanımı ile elastisite modülü arasında kuvvetli bir ilişki
olduğu ve bu ilişkiye dayanılarak elastisite modülünün yaklaşık olarak tahmin edilebileceği görülmüştür
FULL TEXT (PDF):
- 2
91-97