Buradasınız

KATI ATIK DEPO ALANLARININ GEOTEKNİK TASARIMI

GEOTECHNICAL DESIGN OF SOLID WASTE LANDFILL SITES

Journal Name:

Publication Year:

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
Solid waste landfills are important engineering structures for protection of wastes, decrease of environmental pollution, and especially prevention of soil and water pollution. Solid wastes should conveniently be maintained in landfill areas to control environmental pollution caused by waste disposals. Until the middle of this century clay liners were used for maintenance of waste disposal, but it was observed that these liner systems were insufficient. Today thinner and less permeable liner systems are constructed by using synthetic materials. In this study, by evaluating the waste landfills, site assessment of landfills and construction of natural and synthetic liner systems were summarized respectively, and especially the design properties of these systems were examined intensively. Also, leachate collection and removal facilities, landfill gas collection unites, and final cover unites were evaluated in a detailed way.
Abstract (Original Language): 
Katı atık depoları atıkların muhafaza edilmesi, çevre kirliliğinin azaltılması, özellikle toprak ve su kirliliğinin önlenmesi açısından önemli mühendislik yapılarıdır. Atıkların neden olduğu çevre kirliliğini kontrol etmek için atıklar uygun şekilde depolama alanlarında muhafaza edilmelidir. Bu yüzyılın ortalarına kadar atıkların muhafaza edilmesi için kil şilteler kullanılmış fakat bu şilte sistemlerinin yetersiz olduğu gözlenmiştir. Günümüzde sentetik malzemeler kullanılarak daha ince ve daha geçirimsiz şilte sistemleri yapılmaktadır. Bu çalışmada atık depolarının değerlendirilmesi yapılarak sırası ile depo yerinin tespit edilmesi, doğal ve sentetik şilte sistemlerinin yapısı özetlenmiş ve bu sistemlerin tasarım özellikleri ayrıntılı olarak incelenmiştir. Ayrıca, sızıntı toplama ve uzaklaştırma tesisleri, depo gazı toplama üniteleri ve örtü tabakası birimleri detaylı olarak irdelenmiştir.
223
230

REFERENCES

References: 

Akbulut, S. 1995. Katı Atık Depolarının Geoteknik Yönden Değerlendirilmesi, Atatürk Üniv., Fen Bil. Enst., Y. Lisans Tezi, Erzurum.
Alberta, E. 1985. Design and Construction of Liners for Municipal Wastewater Stabilization Ponds, Report, Alberta Environment Publication, Edmonton, Canada.
Anonymous, 1989a. EPA "Final Covers on Hazardous Waste Landfills and Surface Impoundments", EPA/530-SW-89-047, OSW, Washington, DC.
Anonymous, 1989b. SCS Engineers Inc. "Landfill Gas Monitoring and Control Systems", Procedural Guidance Manual for Sanitary Landfills, California Waste Management Board, Vol. 2, Sacramento, CA, April.
Benson, C. H., Daniel, D. E. 1990. " Influence of Clods on Hydraulic Conductivity of Compacted Clays", Journal of Geotechnical Engineering, pp 1231-1248, Vol. 113, No 12.
Bouazza, A. 2002. Geosynthetic Clay Liners, Geotextiles and Geomembranes, 20, pp. 3-17.
Bouazza, A., Van Impe, W. F. and Van Den Broeck, M. 1996. "Hydraulic Conductivity of a Geosynthetic Clay Liner Under Various Conditions", Proc. of the Sec. Int. Congress on Landfills, Vol. 1, Cagliari,
Italy, pp. 595-610.
Cope, F. G. Karpinksi, J. P. and Stein, L. 1984.
"Use of Liners for Containment of Hazardous Waste Landfills", Pollution Engineering, Vol. 16, No 3.
Daniel, D. E. 1993. Geotechnical Practice For Waste Disposal, Chapman& Hall Pub. London, UK.
Daniel, D. E., Benson, C. H. 1990. "Water Content-Density Criteria for Compacted Soil Liners", Journal of Geotechnical Engineering, pp. 1811-1830, Vol. 116, No 12, December.
Daniel, D. E. and Wu, Y. K. 1993. "Compacted Clay Liners and Covers For Sites", Journal of Geotechnical Engineering, Vol. 119, No 2, pp.
223-237.
Dawson, G. W., Merger, B.W. 1973. "Site Selection Criteria Areas as Delineated in The 1973 Report to Congress", Hazardous Waste Management, pp.
465-468.
Giroud, J. P., Soderman, K. L. 2000. Criterion for Acceptable Bentonite Loss From a GCL Incorporated into a Liner System. Geosynthetics International, 7 (4-6), pp. 529-581.
Koerner, R. M. 1985. "Landfilling, Liners and Covers for Waste Disposal", Construction and Geotechnical Methods in Foundation Engineering, McGraw-Hill, Inc. New York.
Mühendislik Bilimleri Dergisi 2003 9 (2) 223-230
229
Journal of Engineering Sciences 2003 9 (2) 223-230
Katı Atık Depo Alanlarının Geoteknik Tasarımı, S. Akbulut
Koerner, R. M.
1993
. "Geomembran Liners", Geotechnical Practice for Waste Disposal, Chapman&Hill Pub., pp. 164-186, London, UK.
Lake, C. B. and Rowe, R. K. 2000. Diffusion of
Sodium and Chloride Through Geosynthetic Clay Liners, Geotextiles and Geomembranes, 18, pp.
103-131.
Moshiri, G. A. and Miller, C. C. 1992.
"An Integrated Solid Waste Facility Design Involving Recycling, Volume Reduction and Wetlands Leachate Treatment", Proceedings of the Constructed Wetlands for The Water Quality Improvement, University of West Florida, Pensacola, FL.
Olsen, H. W. 1962. "Hydraulic Flow Through
Saturated Clay", Clay Miner, pp. 131-161, Vol. 9, No. 2.
Orsini, C., Rowe, R. K. 2001. "Testing Procedure and Results For the Study of Internal Erosion of
Geosynthetic Clay Liners", Proc. of the Geosynthetics 2001, Portland, USA, pp. 189-201.
Shackelford, C. D., Benson, C. H., Katsumi, T., Edil, T. B., Lin, L. 2000. Evaluating the Hydraulic Conductivity of GCLs Permeated With non-Standard Liquids, Geotextiles and Geomembranes, 18, pp.133-161.
Sharma, D. H. and Lewis, P. S. 1994. Waste Containment Systems, Waste Stabilization, and Landfills, Design and Evaluation, Waste Characterization and Solid-Waste Interaction, Jhon Wiley & Sons INC., pp 26-35, New York.
Tchobanoglous, G., Theisen, H. and Vigil, S., 1993. Integrated Solid Waste Management Engineering Principles and Management Issues, McGraw Hill, Inc., New York.
Vangpaisal, T., Bouazza, A. 2001. "Gas Permeability of Three Needle Punched Eosynthetic Clay Liners", Proc. of the Sec. ANZ Conference on Environmental Geotechnics, Newcastle, Australia.

Thank you for copying data from http://www.arastirmax.com