Buradasınız

AKIŞKAN YATAKTA KATI MİKTARININ YATAK YÜKSEKLİĞİ VE KATI ORANINA ETKİSİ

IN THE FLUIDIZED BED THE EFFECT OF SOLID QUANTITY ON THE HEIGHT OF BED AND SOLID OF RATE

Journal Name:

Publication Year:

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In the process of meeting the growing demand for electric power and heat, coal will play an increasingly important role in the world wide. Fluidized combustion offers a clean and relatively inexpensive method for coal combustion, a method insensitive to fuel quality and capable of reducing sulfur and nitric oxides emission. At the work, a prototype fluid bed was produced and the distance between the holes had been narrower towards to the center of the distributor sieve in order to balance the distribution of the air. Later on, the quantity of the coal was decreased continuously and at the end of the measurements, the heights of the solids and the rates of the solid had been defined and the effects of the coal quantity had been investigated.
Abstract (Original Language): 
Artan elektrik ve ısı ihtiyacının karşılanmasında, kömür tüm dünyada önemi gittikçe artan bir rol oynamaktadır. Akışkan yatakta yakma, yakıtın niteliklerine bağlı olmayan, kükürt ve azot oksitlerin yayımını (emisyonunu) azaltabilen, temiz ve nispeten ucuz bir kömür yakma metodudur. Bu çalışmada bir prototip akışkan yatak yapılmış ve kullanılan dağıtıcı eleğin daha dengeli bir hava dağılımı için, içe doğru (merkeze) gidildikçe birim alana düşen delik sayısı azaltılmıştır. Daha sonra kömür miktarı sürekli arttırılarak yapılan ölçümlerin sonucunda katı yükseklikleri ve katı oranları belirlenmiş, kömür miktarının bunlara etkisi incelenmiştir.
865
870

REFERENCES

References: 

Anderson, K., Carson, R. and Eady, D. 1994. "Petroleum Coke Cofiring at the 160 Mwe AFBC Shawnee Unit", Proceedings of the Intersociety Energy Conversion Engineering Conference, 3, USA, 1296-1301.
Botteril, J.
S
. M., Teoman, Y. ve Yüregir, K. R. 1981. "Sıcaklığın Akışkan Yatakların Davranışına Etkisi", 3. Ulusal Isı Kongresi, Trabzon, 287.
Broedermann, P. 1987. Calching of Fine-Grained in The Circulating Fluid Bed, Lurgi GmbH, Germany.
Dry, R. J. and La Nauze, R. D. 1990. Combustion in Fluidized Beds, Chemical Engineering Progress,
31-47.
Fan, L. S.
1992
. Gaz-Liquid-Solid Fluidization Engineering, Bulterworths, Boston.
Fitzgerald, T. J. 1980. "Fundementals of Fluidized Bed Hydrodynamics as Applied to FBC System Design", DOE/WVO Conference on FBC System Design and Operation, West Virginia.
Gibbs, B. M. 1976. "A Mechanistic Model for Predicting the Performance of a Fluidized Bed Coal Combustor", Fluidized Combustion Inst. of Fuel Symp. Ser. No: 1, London, 1.
Gupta, Y. S. 1995. Mandal, P. K., Santhanam, V. C. and Satyanarayana, A., "PFBC With Ash Coals: Experience of Bharat Heavy Electricals Limited", Proceedings of the International Conference on Fluidized Bed Combustion, 1, USA, 91-95.
Jeffs, E. 1997. Karita: A Quantum Leap For PFBC, Turbomachinery International, 38 (2), 16-17.
Johns, R. 1986. Fluidized Bed Combustion Boilers Gain Commerical Acceptance, Power Engineering,
July.
Leckner, B. 1996. "Fluidized Bed Combustion: Achievements and Problems" Symposium (Intrenational) on Combustion, 2, USA, 3231-3241.
Lundberg, L., Mackel, B. and Marchese, N. 1996. Changing Workhorses, Water Environment and
Tachnology, 8 (5), 47-52.
Mackenzi, J. and Schweteger, B. 1982. Fluidized Bed Boilers, Power, 51.
Majjor, Y. S. H. and Habbeebullah, M. B. 1996. Repowering a Steam Power Plant by Means of Fluidised-Bed Combustion and a Two-Shaft Gas Turbine, Journal of the Institute of Energy, 69 (479),
Makansi, J. and Schwieger, R. 1987. Fluidized-Bed Boilers, Power, Special Report, May., 1-16.
Özkaynak, F. T. 1977. "Akışkanlaştırılmış Yataklarda Isı Iletim Mekanizmasının Incelenmesi", I. Ulusal Isı Kongresi, Ankara, 263.
Plass, L., Bierbach, H. and Gummel, P. 1987. Experience With Combustion in Circulating Fluidized Beds, Lurgi GmbH, Germany.
Smock, R. 1987. Fluid Bed Combustion Invades Industrial, Utility Boiler Markets, Power Engineering, 12-19 August.
Tolay, M., Atakül, H. ve Ekinci, E. 1983. "Akışkan
Yataklı Boiler Tasarımı", Isı Bilimi ve Tekniği 4.Ulusal Kongresi, Gaziantep, 83.
Tolunay, E. ve Bodur, M. 1981. "80.000
Kcal/Saat'lik
S
u Kazanı Için Akışkan Yataklı Linyit Yakıcısı Tasarımı ve Yapımı", 3. Ulusal Isı Kongresi, Trabzon, 321.

Thank you for copying data from http://www.arastirmax.com