Buradasınız

Anasayfa » Content

Bir Türbülanslı Akışta Akış Alan Üzerine Yüzey Pürüzlülüğü Etkisinin Sayısal İncelenmesi

NUMERICAL INVESTIGATION OF SURFACE ROUGHNESS EFFECTS ON THE FLOW FIELD IN A SWIRL FLOW

Journal Name:

  • Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi

Publication Year:

  • 2015

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
The aim of this study is to investigate axial and tangential velocity profiles, turbulent dissipation rate, turbulent kinetic energy and pressure losses under the influence of surface roughness for the swirling flow in a cyclone separator. The governing equations for this flow were solved by using Fluent CFD code. First, numerical analyses were run to verify numerical solution and domain with experimental results. Velocity profiles, turbulent parameters and pressure drops were calculated by increasing inlet velocity from 10 to 20 m/s and roughness height from 0 to 4 mm. Analyses of results showed that pressure losses are decreased and velocity field is considerably affected by increasing roughness height.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışmanın amacı, bir siklondaki girdaplı akışta yüzey pürüz yükseklik değerinin etkisinde eksenel ve teğetsel hız profilleri, türbülans yayınım oranı, türbülans enerjisi ve basınç kayıplarının araştırılmasıdır. Bu akış için korunum denklemleri Fluent CFD kodu kullanılarak çözülmüştür. İlk olarak sayısal model ve çözüm alanının doğrulanması için elde edilen veriler deneysel sonuçlarla karşılaştırılarak modelin doğrulaması yapılmıştır. Giriş hızı 10-20 m/s arasında ve pürüz yüksekliği 0 ile 4 mm arasında değiştirilerek, hız profilleri, türbülans parametreleri ve basınç kayıpları üzerindeki etkileri incelenmiştir. Analiz sonucunda pürüz yüksekliği arttıkça basınç kayıplarının azaldığı ve hız alanının önemli derecede etkilendiği görülmüştür.
FULL TEXT (PDF): 
PDF icon arastirmax-bir-turbulansli-akista-akis-alan-uzerine-yuzey-puruzlulugu-etkisinin-sayisal-incelenmesi.pdf
  • 2
1
18
  • Turkish

REFERENCES

References: 

1. Cebeci, T. and Bradshaw P. (1997) Momentum Transfer in Boundary Layers, Hemisphere
Publishing Corporation, New York.
2. Chuah, T. G., Gimbun, J. and Choong, T. S. Y. (2006) A CFD Study the Effect of Cone
Dimensions on Sampling Aerocyclones Performance and Hydrodynamics, Powder
Technology, 162, 126–132.
3. Gong, A. L. and Wang, L. Z. (2004) Numerical Study of Gas Phase Flow in Cyclones with
the Repds. Aerosol Science and Technology, 38, 506–512.
4. Hoekstra, A. J., Derksen, J. J. and Van Der Akker, H. E. A. (1999) An Experimental and
Numerical Study of Turbulent Swirling Flow in Gas Cyclone, Chemical Engineering Science,
54, 2055-2065.
5. Hoekstra, A. J. (2000) Gas Flow Field and Collection Efficiency of Cyclone Separators,
Ph.D. Thesis, Delft University of Technology, Netherlands.
6. Karagoz, I. and Avci, A. (2005) Modelling of the Pressure Drop in Tangential Inlet Cyclone
Separators, Aerosol Science and Technology, 39, 857–865.
7. Karagoz, I. and Kaya, F. (2007) CFD Investigation of the Flow and Heat Transfer
Characteristics in A Tangential Inlet Cyclone, International Communications in Heat and
Mass Transfer, 34, 1119–1126.
8. Karagoz, I. and Kaya, F. (2009) Evaluations of Turbulence Models for Highly Swirling
Flows in Cyclones, Computer Modeling in Engineering and Sciences,43(2),111-129.
9. Kaya, F. and Karagoz, I. (2008) Performance Analysis of Numerical Schemes in Swirling
Turbulent Flows in Cyclones, Current Science, 94, 1273–1278.
10. Kaya, F. and Karagoz, I. (2012) Experimental and Numerical Investigation of Pressure Drop
Coefficient and Static Pressure Difference in a Tangential Inlet Cyclone Separator, Chemical
Papers, 66(11), 1019–1025.
11. Lien, F. S. and Leschziner, M. A. (1994) Assessment of Turbulence-Transport Models
Including Non-Linear RNG Eddy-Viscosity Formulation and Second –Moment Closure for
Flow over A Backward Facing Step, Computers & Fluids, 23, 983-1004.
12. Shukla, S. K., Shukla, P. and Ghosh, P. (2010) Evaluation of Numerical Schemes Using
Different Simulation Methods for the Continuous Phase Modeling of Cyclone Separators,
Advanced Powder Technology, DOI:10.1016/j.apt.2010.11.009.

Thank you for copying data from http://www.arastirmax.com