Buradasınız

TÜVENAN TİNKALDEN PİLOT ÖLÇEKTE MİKRONİZE KALSİNETİNKAL ÜRETİMİ

PRODUCTION OF MICRONIZED CALCINED TINCAL FROM RUN-OF-MINE TINCAL AT PILOT SCALE PLANT

Journal Name:

Publication Year:

Keywords (Original Language):

Abstract (2. Language): 
In this study, the calcined tincal produced in laboratory scale at ETİ Mine Works General Management, Technology Development Department previously, in the light of the data obtained from the laboratory, micronize calsined tincal production has been madein industrial size. For this purpose, an industrial scale pilot plant has been established at The Directorate of Kırka Boron Works. In this plant, calcined tincal is obtained by single-stage in the rotary calcination furnace. This process is called as “single step calcination - autogenous grinding –separation method (CGS)”. In the mentioned process, by applying heat treatment; products were manufactured with higher B2O3 grade, lower H2O content and lower impurities. Since its size is micron level, product was named "Micronize Calcined Tincal" and the production yield was about 90% on the basis of B2O3. The calcined tincal obtained by this method, is a new commercial product as well as an alternative input for the production of borax penta hydrate, was patented.
Abstract (Original Language): 
Bu çalışmada daha önce Eti Maden İşletmeleri Genel Müdürlüğü, Teknoloji Geliştirme Dairesi Başkanlığında laboratuvara boyutta üretilen kalsine tinkal, laboratuvardaelde edilen veriler ışığında, endüstriyel boyuta taşınarak mikronize kalsine tinkal üretimi yapılmıştır. Bu amaçla, Kırka Bor İşletme Müdürlüğünde endüstriyel ölçekte kalsinasyon pilot tesisi kurulmuştur. Döner kalsinasyon fırını içerisinde tek kademede kalsine tinkal elde edilmiştir.Geliştirilen bu yönteme “Tek Kademede Kalsinasyon-Otojen Öğütme-Separasyon (KÖS) Yöntemi” adı verilmiştir. Bu metotla ısıl işlem uygulanarak; tek kademede, yüksek B2O3 tenörlü, düşük H2O ve safsızlık içeren ürünler üretilmiştir.Üretilen ürün mikron boyutunda olması nedeniyle Mikronize Kalsine Tinkalolarak adlandırılmış, üretim verimi B2O3 bazında yaklaşık %90 olarak gerçekleşmiştir. Gerçekleştirilen bu yöntem ile boraks penta üretimi için alternatif bir ürün olmasının yanı sıra yeni endüstriyel satışı olan bir ürün olarak patenti alınmıştır.
657
670

REFERENCES

References: 

1- M. İ. Ünlü, M. Bilen, M. Gürü “Kütahya-Emet
Bölgesi Yeraltı Sularında Bor ve Arsenik
Kirliliğinin Araştırılması”J. Fac. Eng. Arch. Gazi
Univ. Vol 26, No 4, 753-760, 2011,
2- U. Aydoğan, M. Bilen, M. Gürü “Anortit Seramik
Malzeme Üretiminde Uçucu Kül Ve Borik Asitin
Kullanılabilirliği” Gazi Üniv. Müh. Mim. Fak.
Der. Cilt 26, No 4, 761-769, 2011
3- Fatma Arslan, Cüneyt Arslan, Mehmet S. Çelik,
“Arsenic removal through the decrepitation of
colemanite ores”Powder Technology
103_1999.260–264
4- H. Akçin, T. Uludağ, B. Şentürk, T. Ergül,
İ.Kayandan, C. Demirbağ, O. Yılmaz,
Y.Yalçınoğlu & A. Mergen Eti Maden İşletmeleri
O.Yılmaz ve Ark. Tüvenan Tinkalden Pilot Ölçekte Mikronize Kalsine Tinkal Üretimi
670 Gazi Üniv. Müh. Mim. Fak. Der. Cilt 28, No 3, 2013
Genel Müdürlüğü, “Tüvenan Tinkalden Kalsine
Tinkal Üretimi” III.İnternational Boron
Symposium, 2006, Ankara
5- Batar, T., Kahraman, B., Cirit, E. ve Çelik, M.S.,
Dry Processing of Borax by Calcination as an
Alternative to Wet Methods, Int. J. Miner.
Process, 54, 99-110, 1998.
6- Şahin, Ö. ve Bultçu, N. 2002 Production of High
Bulk Density Anhydrous Borax in Fluidized Bed
Reactor. Chemical Engineering and Processing.
41, 135-141.
7- Şahin, Ö., Genli, N., Özdemir, M. 2005 Anew
Method For Producing Anhydrous Puffed
BoraxChemical Engineering and Processing. 44,
1-6.
8- PCT/ IB 2007/ 054225-EP 7118803.1.“Calcined
Tincal Production method by Calcination
Autogenic Grinding and Seperation (CASG)
Method in a Single Step”-
9- TPE-2007/ 03372. Tek kademede Kalsinasyon
Otojen Öğütme ve Seperasyon Yöntemiyle (KÖS)
Kalsine Tinkal Üretimi.
10- Handbook of Chemistry and Physics, 61
Edition, CRC Pres, Florida, ABD, 1980-1981.

Thank you for copying data from http://www.arastirmax.com