Effects of patch material on the adhesive in the repair of damaged pipes
Journal Name:
- Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
Pipes exposed to internal pressure are damaged due to the change in
temperature and pressure. In the repair of these damaged pipes,
adhesively bonded joints, which have been widely used in almost all
kinds of fields in recent years, are used. Materials to be bonded in
adhesively bonded joints may be of different types or the same type.
Material choice has great importance in the repair of damaged pipe
with adhesive because adhesives may exhibit different strength values
in different materials. In this study, three different patching materials
including composite, aluminum and steel were selected for the repair
of damaged galvanized steel pipes, and how they would exhibit a
mechanical behavior on the adhesive was investigated. Damages that
had occurred in pipe installations exposed to internal pressure were
bonded with a uniform adhesive and investigated numerically and
experimentally. Therefore, cracks were formed in the galvanized pipes,
and flat braided carbon fiber composite, aluminum and steel patches
consisting of 7 (2 mm), 9 (2.6 mm) and 11 (3.2 mm) layers were
bonded with two-component acrylic adhesives (DP810). Internal
pressure was exerted to the repaired pipes, and the effects on the
adhesive of patch material depending on the patch thickness,
overlapping angles and overlapping length were investigated.
Bookmark/Search this post with
Abstract (Original Language):
İç basınca maruz borular sıcaklık ve basıncın değişmesi sonucunda
hasara uğramaktadır. Hasara uğrayan bu boruların onarılması son
yıllarda hemen hemen her türlü alanda yaygın bir şekilde
kullanılmakta olan yapıştırma bağlantılarıyla yapılmaktadır.
Yapıştırma bağlantılarında birleştirilecek olan malzemeler aynı
türden ya da farklı türden olabilmektedir. Yapıştırıcılar farklı
malzemelerde farklı mukavemet değerleri sergileyebileceğinden dolayı
hasara uğramış borunun yapıştırıcı ile tamir edilmesinde malzeme
seçimi büyük önem taşımaktadır. Bu çalışmada, hasara uğramış
galvanizli çelik boruların tamirinde kompozit, alüminyum ve çelik
olmak üzere üç farklı yama malzemesi seçilerek yapıştırıcı üzerinde
nasıl bir mekanik davranış sergileyeceği araştırılmıştır. İç basınca
maruz boru tesisatlarında meydana gelen hasarlar, farklı yama
malzemeleri kullanılarak tek tip yapıştırıcı ile birleştirilmiş nümerik ve
deneysel olarak incelenmiştir. Bunun için galvanizli borular üzerine
çatlak oluşturulmuş 7 (2 mm), 9 (2.6 mm) ve 11 (3.2 mm) tabakadan
oluşan düz örgülü karbon fiber kompozit yamalar, alüminyum
yamalar ve çelik yamalar iki bileşenli akrilik yapıştırıcı (DP810) ile
birleştirilmiştir. Tamir edilen borulara iç basınç uygulanmış, yama
kalınlığı yama bindirme açıları ve bindirme uzunluklarına bağlı olarak
yapıştırıcı üzerinde etkileri incelenmiştir.
FULL TEXT (PDF):
- 4