[1] R. Haas, W. R. Hudson, and J. Zaniewski, “Modern Pavement
Management”. Krieger Publishing Company, Malibar, 1994.
[2] W. N. Carey, and P. E. Irick, “The Pavement Serviceability-
Performance Concept”. Highway Research Board Bulletin, No. 250,
1960, pp. 40-58.
[3] J. L. Fernandes Jr., and R.E. Barbosa, “Estimativa das cargas dinâmicas
dos veículos rodoviários que atuam sobre os pavimentos e pontes”.
Transportes, São Paulo, v. 8, n. 2, 2000, pp. 32-50.
[4] T. D.Gillespie, W. D. O. Paterson and M.W. Sayers, “Guidelines for
Conducting and Calibrating Road Roughness Measurements”. World
Bank Technical Paper Number 46, 1986, 87 p.
[5] W. G. Buttlar, and S. Islam, “Measurement of pavement roughness
using an Android-based smartphone application.” Transportation
Research Record: Journal of the Transportation Research Board, No.
2457, Washington, D.C., 2014, pp. 30–38.
[6] V. Douangphachanh and H. Oneyma, “Estimation of road roughness
condition from smartphones under realistic settings.” In Proceedings of
the 13th International Conference on ITS Telecommunications (ITST):
EURASIP Journal on Wireless Communications and Networking, 2014,
pp. 433-439.
[7] P. M. Sauerewin and B. L. Smith, “Investigation of the Implementation
of a Probe-Vehicle Based Pavement Roughness Estimation System”.
Mid-Atlantic Universities Transportation Center, University Park, Pa,
2011, 88 p.
[8] T. R. Hanson and C. Cameron, “Can a smartphone collect IRI data?.”
Conference and Exhibition of the Transportation Association of Canada
– Transportation: Innovations and Opportunities Fredection, NB,
Canada, 2012.
[9] T. Hanson, C. Cameron and E. Hildebrand, “Evaluation of low-cost
consumer-level mobile phone technology for measuring international
roughness index (IRI) values.” Canadian Journal of Civil Engineering,
No. 9, Vol. 41, 2014, pp. 819-827.
[10] G. Alessandroni, et al., “Smartroadsense: Collaborative road surface
condition monitoring”. International Conference on Mobile Ubiquitous
Computing, Systems, Services and Technologies, Ubicomm, 2014, pp.
210-215.
[11] H. Jones, and L. Forslof, “Roadroid: Continuous Road Condition
Monitoring with Smart Phones.” Journal of Civil and Architecture (9),
2015, pp. 485-496.
[12] K.Laubis, V. Simko, A. Schullera, “Road Condition Measurement and
Assessment: A Crowd Based Sensing Approach”. Proceedings of the
Thirty Seventh International Conference on Information Systems.
Dublin, Ireland, 2016, pp. 11–14.
[13] M. W. Sayers, and S. M. Karamihas, “The little book of profiling: basic
information about measuring and interpreting road profiles.”
Transportation Research Institute, University of Michigan, USA, 1998.
[14] L. L. Silva, J. R. Rodrigues, R. M. Cazo, M. M., Carvalho, A. Passaro,
and V. R. Almeida, “Caracterização de Erros Sistemáticos em um
Acelerômetro Micro-Eletro-Mecânico Capacitivo.” Conference: VIII
Simposio Brasileiro de Engenharia Inercial - SBEIN, Instituto Nacional
de Pesquisas Espaciais - INPE, Sao Jose dos Campos, Brazil, 2015, p.11
[15] T. Minh Do and T. Chi Le, “Performance Analysis of FFT Filter to
Measure Displacement Signal in Road Roughness Profiler.” In
International Conference on Electronics Engineering and Technology:
International Journal of Computer and Electrical Engineering, No. 4,
Vol. 5, Bangkok, Thailand, 2013, pp. 356-361.
[16] ASTM (American Society of Testing and Materials), “Standard Practice
for Calibration of Systems Used for Measuring Vehicular Response to
Pavement Roughness”. ASTM E 1448.USA. 1992.
[17] ASTM, “Measuring Road Roughness by Static Level Method”. ASTM
E 1364. Philadelphia, Pa, 1995.
[18] J. G. Proakis and D. G. Manolakis, “Digital signal processing:
Principles, algorithms and applications”, 4 ed. Prentice-Hall. 2006.
[19] DEPARTAMENTO NACIONAL DE ESTRADAS DE RODAGEM –
DNER, “Método do Nível e Mira para Calibração de Sistemas
Medidores de Irregularidade Tipo Resposta”. DNER-ES 173/86.
Ministério dos Transportes, Espírito Santo. 1986.
Thank you for copying data from http://www.arastirmax.com