You are here

Home » Content

Yüksek mukavemetli beton (HSC) ve köpük beton için izin verilen katkıların in vitro değerlendirilmesi

In vitro evaluation of additives allowed for high strength concrete (HSC) and foam concrete

Journal Name:

  • Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi

Publication Year:

  • 2017
DOI: 
10.5505/pajes.2016.82584

Key Words:

Keywords (Original Language):

Author Name
Abstract (2. Language): 
Thanks to significant advances in materials science, researchers have managed to fabricate and develop different types of concrete proportional to application of new concrete technologies, such as high strength concrete (HSC) and foam concrete. The current paper presents the results of in experimental studies on foam concrete and its application. In addition, the effect of various parameters such as cement content, Water/Cement ratio as well as application of additives has been studied in mix design. In HSC, interaction between concrete constituent materials plays an important role in mechanical properties and compressive strength of concrete. Therefore, an appropriate understanding of these factors helps us select the suitable type and amount of materials in order to make a concrete with desirable behavior and strength. The methods and theoretical procedures used in the study is based on the ACI codes. This study aims to investigate the effect of using Micro Silica and plasticizer on strength of HSC. Based on the obtained results, the optimum percentage used for concrete mix design and positive effects of these materials on concrete property were confirmed.
Bookmark/Search this post with
Abstract (Original Language): 
Malzeme bilimindeki önemli ilerlemeler sayesinde araştırmacılar, yüksek mukavemetli beton (HSC) ve köpük beton gibi yeni beton teknolojilerinin uygulanmasına orantılı olarak farklı beton tipleri üretip geliştirmeyi başardılar. Bu yazıda köpük beton ve uygulamaları üzerine deneysel çalışmaların sonuçları sunulmaktadır. Ayrıca çimento içeriği, su / çimento oranı ve katkı maddeleri gibi çeşitli parametrelerin etkisi karışım tasarımında incelenmiştir. HSC'de beton kurucu maddeler arasındaki etkileşim, betonun mekanik özelliklerinde ve basınç dayanımında önemli rol oynamaktadır. Bu nedenle, bu faktörlerin uygun bir şekilde anlaşılması, istenen davranış ve dayanıklılığı olan bir betonun yapılması için uygun tür ve miktarda malzemeyi seçmemize yardımcı olur. Çalışmada kullanılan yöntemler ve teorik prosedürler ACI kodlarına dayanmaktadır. Bu çalışma, HSC'nin mukavemetine Micro Silica ve plastikleştiricilerin kullanmasının etkisini araştırmayı amaçlamaktadır. Elde edilen sonuçlara göre, beton karışımı tasarımı için kullanılan optimum oran ve bu malzemelerin beton mülkiyet üzerindeki olumlu etkileri doğrulanmıştır.
FULL TEXT (PDF): 
PDF icon arastirmax-yuksek-mukavemetli-beton-hsc-kopuk-beton-icin-izin-verilen-katkilarin-vitro-degerlendirilmesi.pdf
  • 3
177
183
  • Turkish

REFERENCES

References: 

[1] Ramamurthy K, Nambiar EKK, Ranjani GIS. "A classification of studies on properties of foam concrete". Cement and Concrete Composites, 31(6), 388-396, 2009.
[2] Faghihmaleki H, Nejati F, Mirzagoltabar-Roshan A, Batebi-Motlagh Y. "An evaluation of multi-hazard risk subjected to blast and earthquake loads in RC moment frame with shear wall". Journal of Engineering Science & Technology. In press.
[3] Khaloo A, Masoomi H, Nozhati S, Dehcheshmeh MM. "Influence of diaphragm opening on seismic response of rectangular RC buildings with end shear walls". Journal of Scientia Iranica. In Press.
[4] Nambiar EKK, Ramamurthy K. "Influence of filler type on the properties of foam concrete". Cement and Concrete Composites, 28(5), 475-480. 2006.
[5] Just A, Middendorf B. "Microstructure of high-strength foam concrete". Materials Characterization, 60(7),
741-748, 2009.
[6] Amran YHM, Farzadnia N, Ali AAA. "Properties and applications of foamed concrete; a review". Construction and Building Materials. 101(1), 990-1005, 2015.
182
Pamukkale Univ Muh Bilim Derg, 23(3), 177-183,2017
H. Faghihmaleki, F. Nejati, H. Masoumi
[7] Jianga J, Lua Z, Niua Y, Lia J, Zhanga Y. "Study on the preparation and properties of high-porosity foamed concretes based on ordinary Portland cement". Materials & Design, 92(15), 949-959, 2015.
[8] Guoa H, Guoa W, Shib Y. "Computational modeling of the mechanical response of lightweight foamed concrete over a wide range of temperatures and strain rates". Construction and Building Materials, 95(2015), 622-631,
2015.
[9] Mousa MI. "Flexural behaviour and ductility of high strength concrete (HSC) beams with tension lap splice". Alexandria Engineering Journal. 54(3). 551-563, 2015.
[10] El-Azab A, Mohamed HM. "Effect of tension lap splice on the behavior of high strength concrete (HSC) beams". HBRC Journal, 10(3), 287-297, 2014.
[11] Lapko A, Grygo R. "Studies of RC Beams Made of Recycling Aggregate Concrete Strengthened with the HSC-HPC Inclusions". Procedia Engineering. 57(2013),
678-686, 2013.
[12] Mehta PK, Monteiro PJM. "CONCRETE Microstructure, Properties and Materials". 3rd ed. New Delhi, India, Central Board of Irrigation and Power, 2002.
[13] ACI Committee 211 (ACI 211.4R-93). "Guide for Selecting
Proportions for High-Strength Concrete With Portland Cement and Fly Ash". American Concrete Institute, Detroit, Michigan, USA, 1993.
[14] ACI 363 R-92. "State-of- the art Report on High Strength
Concrete, ACI Manual of Concrete Practice". Part-I, American Concrete Institute, USA, 1993.
[15] Ai'tcin PC. "The importance of the water-cement and water-binder ratios". Science and Technology of Concrete Admixtures. Pages 3-13, 2016. doi:10.1016/B978-0-08-
100693-1.00001-1.
[16] Neville AM. Properties of Concrete. 5th ed. Pearson Education Limited, Harlow, United Kingdom, 2011.
[17] Nambiar EKK, Ramamurthy, K. "Fresh state characteristics of foam concrete". Journal of Materials in Civil Engineering, 20(2), 111-117, 2008.
[18] Nambiar EKK, Ramamurthy K. "Models for strength prediction of foam concrete". Materials and Structures, 41(2), 247-254, 2008.
[19] Zhang Z, Provis JL, Reid A, Wang H. "Geopolymer foam concrete: An emerging material for sustainable construction". Construction and Building Materials, 56(15), 113-127, 2014.
[20] Faghihmaleki H, Najafi EK, Aini AH. "Seismic rehabilitation effect in a steel moment frame subjected to tow critical loads". International Journal of Structural Integrity, 8(1), 1 -11, 2017.
[21] Abdollahzadeh GR., Faghihmaleki H. "Seismic-explosion risk-based robustness index of structures". International Journal of Damage Mechanics, DOI: 10.1177/1056789516651919, (First Online).
[22] Faghihmaleki H, Ahmadian F, Roosta H. "The effect of far field and near field earthquakes on the hysteresis energy and relative displacement of steel moment resisting frame structures". Journal of Building Pathology and Rehabilitation, 2(5),1- 9, 2017.

Thank you for copying data from http://www.arastirmax.com