You are here

SÜREKLİ TAVLAMA HATLARI ISITMA OPTİMİZASYONU İLE ENERJİ TASARRUFU SAĞLANMASI

ENERGY SAVING IN CONTINUOUS ANNEALING LINE USING HEATING OPTIMIZATION

Journal Name:

Publication Year:

Abstract (2. Language): 
Energy consumption of Iron and Steel Industry sector in Turkey has the highest share in final energy consumption. In the globalized world, day by day, worsening of the conditions of competition and negative environmental pressures, more efficient energy usage is come to the forefront. Growing industries can survive by providing efficient energy consumption and effective energy follow-up. The failure of businesses is become inevitable with ineffective and inefficient usage of energy resources used in the production. Energy savings in the continuous annealing line which is the subject of this article is an important issue and it is based on many parameters. Measuring strip's temperature is so important to continuous annealing line control in the annealing automation system. Increasing or decreasing the oven temperature provides the process control with the adjustment of the heater which is specific heating capacity in these furnaces. Each strip annealing temperature is different which depends on the strip quality. Also strip thickness, strip width and the line speed are the other factors of the oven temperature conditions. It needs to realize the production of an optimal quality ranking to increase the line speed. This improves the production level and because of the oven temperature changes in the order that causes the reduction of costs due to energy savings, optimized production is achieved. Finding the most suitable production sequence is modeled by fuzzy goal programming functions used the above parameters were investigated.
Abstract (Original Language): 
Demir ve Çelik Sanayi enerji tüketimi ülkemizde nihai enerji tüketimlerinde en yüksek paya sahiptir. Küreselleşen dünyada rekabet koşullarının ve çevre koşullarına uyum şartlarının gün geçtikçe daha da ağırlaşması enerjinin etkin kullanımını ön plana çıkarmaktadır. Gelişen sanayiler enerjiyi etkin takip ederek ve enerji tüketimini verimli kullanarak ayakta kalabileceklerdir. Enerji kaynaklarını üretimde etkin ve verimli kullanmayan işletmelerin başarısızlığa uğraması kaçınılmazdır. Bu tezin konusu olan sürekli tavlama hatlarındaki enerji tasarrufu önemli bir konudur ve birçok parametreye bağlıdır. Tavlama otomasyon sisteminde şerit sıcaklığının ölçülmesi sürekli tavlama hat kontrolünde oldukça önemlidir. Belirli ısıtma kapasitesine sahip ısıtıcıların değerlerinin arttırılıp azaltılması ile fırın içi sıcaklarının dolayısıyla şerit sıcaklıklarının kontrolü sağlanır. Her bir şerit tavlama sıcaklığı şerit kalitesine bağlı olarak farklıdır. Ayrıca fırın sıcaklık değeri şerit boyutlarına ve hat hızına da bağlı olarak değişir. Hat hızını arttırmak için en uygun kalite sırasında üretimi gerçekleştirmek gerekir. Üretim seviyesinin arttırılması ve sıcaklık değişimlerinin en uygun olduğu sırada ürünlerin üretilmesi enerji tasarrufu oluşturmaktadır; bu da maliyetlerin azalmasına neden olur. Yukarıdaki parametrelerin modellendiği bulanık mantık hedef programlama fonksiyonları ile en uygun üretim sıralamasının bulunması araştırılmıştır.
73
83

REFERENCES

References: 

Arumugam, M. S., Chandramohan , A., Murthy G. R.(2011). On the optimal control of steel annealing processes via various versions of genetic and particle swarm optimization algorithms. International Journal of Bio-Inspired Computation, 12, 371-392
Carvalho, S.R., Ong, T.H. ve Guimaraes, G.(2006). A mathematical and computational model of furnaces for continuous steel strip processing. Journal of Materials Processing Technology , 178, 379 – 387
Charnes A., Cooper, W.W. ve Ferguson,R. (1955). Optimal estimation of executive compensation by linear programming. Journal of Management Science, 1, 138-151.
Chen, Y., Chen, L. and Chien-Yu Huang. (2009). Fuzzy Goal Programming Approach to Solve the Equipment - Purchasing Problem of an FMC. International Journal of Industrial Engineering, 270-281.
Choa, Y.C. , Cassandrasb, C. G. ve Kwon W. H. (2004). Optimal control for steel annealing processes as hybrid systems. Journal of Control Engineering Practice, 12, 1319–1328
Dini, G. , Vaghefi, S.M.M. ve Lotfiani,M. (2008). Computational and experimental failure analysis of continuous-annealing furnace radiant tubes. Journal of Engineering Failure Analysis, 15, 445–457.
Erdin, Dr. C. (2008). Bulanık Hedef Programlama ve Su havzasında bir uygulama. Journal of İstanbul University Social Sciences, 89-108
Erkan, K. ve Kale, S. (2007) Bulanık Hedef Programlama Yöntemi ile Süre-Maliyet-Kalite Eniyilemesi. Construction Management Congress, 109-118
Ertuğrul, İ. (2005). Bulanık Hedef Programlama Ve Bir Tekstil Firmasında Uygulama Örneği. Journal of Eskişehir Osmangazi University Social Sciences, 45-78
Ertuğrul, İ. ve Güneş, M. (2007). Fuzzy Goal Programming and an Application of Production Process. Analysis and Design of Intelligent Systems using Soft Computing Techniques Advances in Soft Computing, 41, 649-659.
Goswami, A., A., Singh, R.K., Prasad, A., Chowdhuri, Dr.S. (2012). Mathematical model based control system for Silicon Steel Mill of Rourkela Steel Plant. Journal of Procedia Technology, 4, 867-872
Guo C. , Zhang, Y. , You, X., Chen X. and Zhang, Y.(2009). Optimal Control of Continuous Annealing Process Using PSO. Int. Conference on Automation and Logistics, 602-606
Güneş, M. ve Umarosman, N. (2005). Fuzzy Goal Programming Approach on Computation of the Fuzzy Arithmetic Mean. Mathematical and Computational Applications, 211-220
Güneş, M. ve Umarusman N. (2007). Bir Karar Destek Aracı Bulanık Hedef Programlama ve Yerel Yönetimlerde Vergi Optimizasyonu Uygulaması. Review of Social, Economic & Business Studies, 242-255
Hans, J. Z. (1991). Fuzzy Set Theory and its Application. Kluwer Academic Publisher, Boston.
Jeong, S. H., Yi, J.J., Kim, J.K. ve Ha, M.Y. (1991). Computer Modeling of the Continuous Annealing Furnace. Journal of KSME, 5, 16-21
Kağnıcıoğlu, C.H. (2006). Hedef Programlama ve Bulanık Hedef Programlama Arasındaki ilişki. Journal of Gazi University Economics and Administrative Sciences Faculty, 17-38
Kelly, C. D. , Watanapongse, D. ve Gaskey, K. M.(1998). Application of Modern Control to a Continuous Anneal Line. IEEE Control Systems Magazine, 32-37.
Lia, S., Qing Chena, Q. ve Huang, G.(2006). Dynamic temperature modeling of continuous annealing furnace using GGAP-RBF neural network. Journal of Neurocomputing, 69, 523–536
Liang, T. (2006). Applying fuzzy goal programming to production / transportation planning decisions in a supply chain. International Journal of Systems Science, 293-304
Liang, T. ve Cheng, H. (2011). Multi-Objective Aggregate Production Planning Decisions Using Two-Phase Fuzzy Goal Programming Method. Journal Of Industrial And Management Optimization, 7, 365-385.
600
650
700
750
800
850
CQTemp
DQ-1Temp
DQ-2Temp
DDQTemp
EDDQTemp
MFS
Lingo
Matlab
0
50
100
150
200
250
300
350
CQSpeed
DQ-1Speed
DQ-2Speed
DDQSpeed
EDDQSpeed
MFS
Lingo
Matlab
83 Energy Saving In Continuous Annealing Line Using Heating Optimization / Alphanumeric Journal, 4(1) (2016) 073-083
Alphanumeric Journal
The Journal of Operations Research, Statistics, Econometrics and Management Information Systems
ISSN 2148-2225
httt://www.alphanumericjournal.com/
Marlow D.O. (1996). Modelling direct-fired annealing furnaces fortransient operations. Journal of Application Mathematics Modelling, 20, 34-40
Mekidiche, M. ve Belmokaddem, M. (2013). Weighted Additive Fuzzy Goal Programming Approach to Aggregate Production Planning. I.J. Intelligent Systems and Applications, 4, 20-29.
Mekidiche, M., Hocine, M. ve Abdelkader S. (2013). Application of tolerance approach to fuzzy goal programming to aggregate production planning. Int. J. Mathematics in Operational Research, 5, 183-204.
Özcan, U. ve and Toklu, B. (2009). Multiple-criteria decision-making in two-sided assembly line balancing: A goal programming and a fuzzy goal programming models. Journal of Computers & Operations Research, 36, 1955 - 1965
Özkan, M. M. (2003). Bulanık Hedef Programlama. Ekin Kitabevi, İstanbul.
Selim, H. , Araz, C. ve Özkarahan İ. (2008). Collaborative production–distribution planning in supply chain: A fuzzy goal programming approach. Transportation Research Part E: Logistics and Transportation Review, 396-419.
Sert, Ü. (2015).Haddeleme Hakkında. http://www.arsivbelge.com/yaz.php?sc=2418
Wan F., Wang Y. ve Qin S.(2012). Modeling of Strip Heating Process in Vertical Continuous Anealing Furnace, Journal Of Iron And Steel Research, 19, 29-36
Wen-Ie, W., Jian-ping, L. , Fu-an, H. ve Xiang-hua L.(2010). Application of Self-Learning to Heating Process Control of Simulated Continuous Anneal. Journal Of Iron And Steel Research, 17, 27-31
Yaghoobi, M.A., Jons, D.F., Tamiz. (2008). Weighted additive models for solving fuzzy goal programming problems. Int. Journal of Intelligent Systems and Applications. Asia Pacific Journal of Operation Research , 25, 715-730
Yanagishima,F., Shimoyama, Y., Suzuki,M., Sunami, H., Haga, T., Ida, Y. ve Irie T.(1981). Characteristics and Operation of Multipurpose Continuous Annealing Line at Chiba Works. Kawasaki Steel Technical Report, 2, 1-13
Yoshitani, N. ve Hasegawa A. (1998). Model-Based Control of Strip Temperature for the Heating Furnace in Continuous Annealing, IEEE Transactions on Control Systems Technology, 6, 146-156
Zhang, Y. , Li, S. ve Tenga, Y. (2012). Dynamic processes monitoring using recursive kernel principal component analysis. Journal of Chemical Engineering Science , 72, 78–86
Zhou, M., Yu D. ve Zhou J. (2008). A New Strip Temperature Control Method for the Heating Section of Continuous Annealing Line. Cybernetics and Intelligent Systems 2008 IEEE Conference, 861 – 864

Thank you for copying data from http://www.arastirmax.com