You are here

Home » Content

DEĞİŞİK SABİT PROTEZ ESTETİK MATERYALLLERİNİN SERTLİK ÖZELLİKLERİ YÖNÜNDEN İNCELENMESİ

INVESTIGATION OF VARIOUS VENERING MATERIALS WITH RESPECT TO HARDNESS SURFACE

Journal Name:

  • Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi

Publication Year:

  • 2003

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
This study was carried out with the aim of examining Ihc effect of various mediums the respect tc hardness quality which is one of critcrious in evaluating vencring mitlerini s used in prosthetic restorations Teflon moulds which can be separated in (i mm. diameter and 3 nun. thick pieces were used. By placing Dentacolor samples into the spaces in Ihcsc mould, with photo- polymerization, jstisit and Riodcnt samples were obtained by fhisking the trial dentures with the help of moulds by curing them under heat and pressure, but porcelain samples were obtained by f umacmg porcelain dough afler it was taken on the faience. It was paid more attenlion to the surfaces of samples prepared to be very smooth. In this way, total 60 samples were prapared in the way that 15 samples would be from each material. Samples were divided into three groups equally. Samples in the first group were kept in dry medium, samples in the second group were kept in distilled water and the others in the (hird group were kept in artificial saliva and ten days later, their hardness measurements were taken WLth Vickcrs test equipment. II was determined that types of veneiing material and medium were significant statistically (pxO.001). It was determined thaL the most hardness value was in porcelain and least hardness value was in Biodent.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışma, pmtetik restorasyonlarda kullanılan estetik, materyallerin değerlendirilmesinde başlıca kriterlerden biri oları sertlik niteliği açısından incelenmesi ve bu niteliğe değişik ortamların etkisinin araştırılması amacıyla yapıldı. Biodent, Isosit ve Dentaeolor Örneklerin hazırlanması için; 6 mm. çapında 3 mm. kalınlığında parçalara ayrılabilen teflon kalıp kullanıldı. Komptv.it rezin (Dcnlacolor) örnekler doğrudan bu kalıp içerisindeki boşluklara yerleştirilerek folopohmcrizasyon ile, Isosit ve Biodeni örnekler, kalıplar yardımı ile şekillendirilen mum örneklerin muflaya alınarak ısı ve basınç allında pişirilmesi ile, porselen örnekler ise, boşluklara yerleştirilen porselen hamurunun fayans üzerine alındıktan sonra fırınlanması suretiyle, elde edildi. Hazırlanan örneklerin yüzeylerinin çok düzgün olmasına özen gösterildi. Bu şekilde, her bir materyalden 15 örnek olacak şekilde toplam 60 ömek hazırlandı. Örnekler, cgit sayıda olacak şekilde üç gruba ayrıldı, birinci gruptaki örnekler kuru ortamda, ikinci gruptaki örnekler 37°C' de Jİstile suda, üçüncü gruptaki örnekler ise yapay tükürükte bekletildi- 10 gün sonra Vickers test cihazında sertlik ölçümleri yapıldı. i£sreiik materyal türünün ve ortamın önemli olduğu, istatistiksel olarak saptandı (p<Q.0Ûl). Kn fazla sertlik değerinin porselende, en az sertlik değerinin ise Hiodcntte olduğu görüldü.
FULL TEXT (PDF): 
PDF icon arastirmax-degisik-sabit-protez-estetik-materyalllerinin-sertlik-ozellikleri-yonunden-incelenmesi.pdf
  • 1
21-27
  • Turkish

REFERENCES

References: 

1. Craig RG, Peyton FA. Restorative Dental Materials. 5 th Ed, St Louis, The CV Mosby Co, 1975: 110-1 !8.
2. Phillips RW. Skinner s Science ot Dental Materials. Philadelphia; WR Saunders Co, 1982; 42.
3.
Zaimoğl
u A, Can G, Ersoy AH, Aksu L. Dişhekimliğinde Maddeler Bilgisi. Ankara Üniversitesi Basımevi, Ankara, 1993:21 3-4, 246-256.
4. O' Brietı WJ. [Denial Materials: Properties and Selection. Chicago: Quintessence Rib, 1989: 5 13-566.
5. White SN, Yu Z. Physical properties of fixed prosthodoııtic rehin composite luting agents. Int -1 Prosthodont 1993; 6; 384.
6. Wassel RW, Mc Cahe Jl, Wall? AWG. Subsurface deformation associated with hardness measurements of composites- Dent Mater ! 992; 8: 2 IK-223.
7- Msya. N, A study on ligth-curcd resins J Nihon IJniv Sch Dent 1988; 30: 33 i -8.
S.
Rassioun
y MA, Grant AA Physical properties ol a visible liglh-ctıred composite resin. J Prosihet Deııî I9S0; 43:536-541.
9. Friedman J, Hassan R. Comparison study of visible curing lights and hardness of light cured restorative materials. J ProsthcL Dent 1984; 52: 504-506.
10. Derand P, Denry IL, Rosens tie! SF. Wear of low-fusing dental porcelains, J Prosthcl Dent 1999; 81:460-463.
11 Scghi RR, Dcnry If,, Rosensticl SF. Relative fracture toughness and hardness of new dental ceramics. J Prosthct Dent 1995; 74:145-150.
12. Scghi RR, Dcnry 1, Brajevic F. F.ITecLs of ion exchancc on hardness and I'racmre toughness of dental ceramics. Int J Prosthodont 1992; 5: 309-314.
13. Meredith N, Selchell DJ. In vitro measurement of cuspal strain and displacement m composite restored teeth. .1 Dent 1997: 25: 331-337.
14. Rehanv A, Hirschfcld Z. Veneering serviceable restorations. Quintessence Int 1988; 19:757-792.
15. Rar/.ilay I, Mvcrs ML, Cooper LB, Grasser GN. Mechanical and chemical retention of laboratory cured composite to metal surfaces. J Prosthct Dent 1988: 59: 131-137.
16. Willcms G, Lambrcchts P, Braem M, Cells JP, Vanherle G. A classification of denial composites according to their morphological characteristics. Dent Mater 1992: S: 310-319.
17. Hacker CH, Wagner WO, Razzoog ME- An in vitro investigation of the wear of enamel on porcelain and gold in saliva. .1 Proslhet Dent 19%; 75: 14-17.
26
Alatiirk Üniv.Diş Hek-Fak-Dcrg. CUt:13, Sayı: 1. Sayl a:2l-27,2003
YEŞİL DUYMUŞ, KAVRU1
!8. Jaeger DC; Harrison A. An in vitro investigation into the wear affects of unglazed, glared and polished porcelain on human enamel. J Prosthet Dent 1994; 72: 320-323.
19, Jnnda R. Vcrbtendkimstnffe-Materialen ıınd leinstungs-fahig-kcit. Quintessenz Zahntech 1997, 48:
839-860.
20 Ludvving K. Werkstoffhundc dcr verbimdkunststoffe. Quintessenz 1997; 23: 683 692,
21. Baraban NJ, The restoration of endodonlically treated teeth. J Prosthct Dent 1988; 59:553-558.
22
Yıldı
z N, Akbulut Ö, Bircari H. İstatistiğe Giriş. Uygulamalı Temel Bilgiler Çözümlü ve Cevaplı Sorular. Erzurum, i999.
23. Leng BR. Jaarda M, Wang RR Filler partide size and composite resin classification systems. J Oral Rehabil 1992; 19: 569-584.
24. Germain H$T, Swartz ML, Phillips RW, Moore BK, Roberts TA. Properties of microfilled composite resins as influenced by filler content. J Dent Res 1985 ; 64: 155-160.
25. Waknine S, Sumithra N, Veıidyaııathan TK, Vaidyanathan J. Properties of visible light cured composite-; J Dent Res 1984; 63: 292,1ADR abstract, 1094.
26- Hasan reisoglu U,
Kalıpçıla
r B, Karaağaç! loğlu L. Değişik sabit protez, estetik materyallerinin sertlik tvEİlikleri yönünden değerlendirilmesi. Ankara Üniv Diş Hek Fak Derg 1988; 15: 65 69.
27. Raptis CN, Fan PL, Powers JH. Properties of microfılled and visible light cured composite resins. JADA 1979; 99: 631-639.
28. Yap AVS, Tcoh SH, Hastings GW, Lu CS. Comparative wear ranking of denial restorative materials utilising different wear simulation modes. J Oral Rehabil 1097; 24: 574-5S0.
29. Yamağa T, Sato Y, Akagawa Y, Taıra M, Wakasa K, Yamoki. Hardness and fracture toughness of four Commercial visible light-CUred composite resin venering materials. J Oral Rehabil 1995; 22: 857-863.
30. Annsaviee KJ. Recent developments in restorative dental ceramics. J Am Dent Assoc 1993; 124:72-84.
31. Piddock V, Qualtrough AJE. Dental ceerramics-an update. .1 Denl 1990; 18:227-235.
32. Mohsen NM, Craig Rti. ilydrolylic stability of silaneted zircoma- siliea-urcihane dimethacryte'e composites, J Oral Rehabil 1995; 22: 967.
33. Scgura A, Donly K.I. In vitro posterior composite polymerization recovery following hygroscopic expansion. J Oral Rehabil 1993; 20:495.
34. Oysaed H, Ruyter IE. Water sorption and filler characteristics of composites for use in posterior teeth. J Denl Res 1986; 65: 1315.
35. Watts DC, Amer O, and Combe EC. Characteristics of visible ligth-curcd composite system. Brit Dent J 1984; 156: 2Û9-2İ5,
36.
Bayda
ş S, Duymuş Yeşil Z. İsı ile polimerize olan akrilik rezinîcrin polimeri/asyun yöntemlerinin karşılaştırılması. Atatürk Üniv Diş Hek Fak Derg 2000; 10: 57-60.
37. Dixon DL, Ek strand KG, Breeding LC. The transverse strengths of three denture base resins. .1 Prosihet Dent 1991; 66; 510-513.
38. Fuji K. Kali que properties of acrylic denture base resins. Dent Mater J 1989; 8: 243^259.
39- Kocxorowski R, Wloeh S. Evaluation of wear of selected prosthetic materials in contact with enamel and dentin. .1 Prosthet Dent 1999: 81: 453-459.
40. Pavune BV, Bruxism and effect on the natural teeth. J Prosthet Dent 1985; 53:692-696,
41. Hudson JD, Goldstein GR, Gcorgcscu M Enamel wear caused by three different restorative materials. J Prosthet Dent 1995; 74:647-654.
42. Hansen EK. After polymerisation of visible ligih activated resins. J Dent Res 1983; 91: 406 410.

Thank you for copying data from http://www.arastirmax.com