You are here

Home » Content

PROTEZ İÇİN REÇİNE DİŞLERİN BOND DAYANIMI İNCELENMESİ REÇİNELER

EXAMINATION OF BOND STRENGTH OF RESIN TEETH TO DENTURE RESINS

Journal Name:

  • Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi

Publication Year:

  • 2005

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
This study was carried out with the aim of exam¬ining bond strength of belonging to different produc¬tive firms acrylic teeth and different denture resins and it was also carried out with the purpose of evaluating the effect of monomer application. For this purpose, two different acrylic resin cen¬tral teeth depending to different firms were two used routinely in our clinic, and three different denture resin materials used in restoration (heat- cured, light- cured and autopolymerizing acrylic resins) were used. Monomer was applied to the half of total 60 central teeth, in equal number from both groups and it wasn't applied to the other half. 30 teeth to which monomer was applied, and 30 teeth to which monomer was not applied were divided into three groups equally. Autopolymerized acrylic with 5 monomers and without 5 monomers was applied to some of teeth, and heat cured acrylic was applied to some of teeth, and light-cured composite was applied to some of teeth by divided them into three groups; and breaking off-force was applied with 130o angle in Hounsfield-pulling and pressing equipment. The values obtained were evaluated with vari¬ance analysis. It was concluded that the type of repair¬ing material used was statistically significant (p<0.001). It was observed that bond strength was the high¬est in heat-cured acrylic and it was the least in light-cured composite. It was seen that the most bonding resistance was in the group applied to monomer in two groups and these two group teeth showed different bonding strenght.
Bookmark/Search this post with
Abstract (Original Language): 
Farklı marka akrilik dişlere farklı restoratif materyallerin bağlanma kuvvetlerini incelemek ve monomer uygulamanın etkisini değerlendirmek amacı ile bu çalışma yapıldı. Bu amaçla, kliniğimizde rutin olarak kullanılan iki ayrı firmaya ait iki farklı akrilik rezin santral diş ve restorasyon için üç farklı protez rezin materyali (ısı ile polimerize akrilik, otopolimerizan akrilik ve ışıkla polimerize kompozit rezin) kullanıldı. Toplam 60 santral dişin yarısına (her grupta eşit sayıda olacak şek¬ilde) monomer uygulandı, diğer yarısına uygulan¬madı). Dişlerin bir kısmına (5 monomerli, 5 monomer-siz diş) otopolimerizan akrilik, bir kısmına ısı ile polimerize akrilik ve bir kısmına da ışıkla sertleşen kompozit uygulandı. Daha sonra bağlanma kuvvetini tespit edebilmek için Haunsfield çekme- sıkıştırma cihazında 130o açı ile kuvvet uygulandı. Elde edilen veriler varyans analizi ile değerlendirildi. Kullanılan tamir materyalinin ve monomer uygulamanın çok önemli (p<0.001), farklı diş grubunun ise önemli (p< 0.05) olduğu istatistiksel olarak saptandı. Bağlanma direncinin en fazla ısı ile sertleşen akrilik rezinde en az ışıkla sertleşen kom-pozitte olduğu görüldü).
FULL TEXT (PDF): 
PDF icon arastirmax-protez-icin-recine-dislerin-bond-dayanimi-incelenmesi-recineler.pdf
  • 2
54-61
  • Turkish

REFERENCES

References: 

1. Caswell CW, Norling BK. Comparative study of the
bond strengths of three abrasion-resistant plastic denture teeth bonded to a cross-linked and a graft¬ed. Grafted, cross-linked denture base material. J Prosthet Dent 1986; 55:701-708.
2. Morrow RM, Matvias FM, Windeler AS, Fuchs RS.
Bonding of plastic teeth to two heat-curing denture base resins. J Prosthet Dent 1978; 39: 565-568.
3. Rupp NW, Bowen RL, Paffenbarger GC. Bonding
cold curing denture base acrylic resin to acrylic resin teeth. J Am Dent Assoc 1971; 83: 601-606.
4. Spratley MH. An investigation of the adhesion of
acrylic resin teeth to denture. J Prosthet Dent 1987;
58: 389-392.
5. Craig RG. Restorative Dental Materials. 6 th Ed The
CVMosby Co, St Louis, 1972: 355-386.
6. Phillips RW. Skinner's Science of Dental Materials.
7 th Ed, W.B. Saunders Co, Philadelphia, 1973: 215-223.
7. Cunningham JL. Bond strength of denture teeth to
acrylic bases. J Dent 1993; 21: 274-280.
8. Andreopoulos AG, Polyzois, GL. Repair of denture
base resins using visible light cured materials. J
Prosthet Dent 1994; 72: 462-468.
9. Beyli MS, von Fraunhofer JA. Repair of fractured
acrylic resin. J Prosthet Dent 1980; 44: 497-503.
10. Andreopoulos AG, Polyzois GL, Demetriou PP. Repairs with visible light-curing denture base materials. Quintessence Int 1991; 22: 703-706.
11. Dar-Odeh NS, Harrison A, Abu-Hammad O. An evaluation of self cured and visible light- cured denture base materials when used as a denture base repair material. J Oral Rehabil 1997; 24: 755-760.
12. Stameisen AE, Ruffino A. Replacement of lost or broken denture teeth with composites. J Prosthet
Dent 1987; 58:119-120.
13.
Yıldı
z N, Akbulut Ö, Bircan H. İstatistiğe Giriş. Uygulamalı Temel Bilgiler Çözümlü ve Cevaplı Sorular. Erzurum, 1999.
14. Geerts GA, Jooste CH. A comparison of the bond
strengths of microwave-and water bath-cured denture material. J Prosthet Dent 1993; 70: 406-409.
15. Vergani CE, Machado AL, Giampaolo ET, Pavarina AC. Effect of surface treatments on the bond strength between composite resin and acrylic resin denture teeth. Int J Prosthodont 2000;13:
383-386.
16. Clancy JM, Boyer DB. Comparative bond strengths of light-cured, heat- cured and autopoly-merizing denture resins to denture teeth. J Prosthet
Dent 1989; 61: 457-462.
17. Clancy JM, Hawkins LF, Keller JC, Boyer, DB. Bond strength and failure analysis of light-cured denture resins bonded to denture teeth. J Prosthet
Dent 1991; 65: 315-324.
18. Hayakawa I, Hirano S, Nagao M, Matsumoto T, Masuhara E. Adhesion of new light-polymerized denture base materials. Int J Prosthodont 1991;4:
561-568.
19. Kawara M, Carter JM, Ogle RE, Johnson RR. Bonding of plastic teeth to denture base resins. J Prosthet Dent 1991; 66:566-571.
20. Yanıkoglu DN, Duymus DZ, Bayındır DF. Comparative bond strengths of autopolymerizing denture resin and light cured composite resin to denture teeth. Int Dent J 2002; 52: 20-24.
21. Cunningham JL. Shear bond strength of resin teeth to heat-cured and light-cured denture base resin. J
Oral Rehabil 2000; 27: 312-316.
22. Takahashi Y, Chai J, Takahashi T, Habu T. Bond
strength of denture teeth to denture base resins. Int JProsthodont 2000; 13: 59-65.
23. Shen C, Colaizzi FA, Birns B. Strength of denture repairs as influenced by surface treatment. J
Prosthet Dent 1984; 52: 844-848.
24. Cook WD, Beech DR, Tyas MJ. Structure and
properties of methacrylate based dental restorative materials. Biomaterials 1985; 6: 362-368.
60
Atatürk Üniv. Diş Hek. Fak.
Cilt: 15, Sayı:2, Sayfa:54-61, 2005
KAVRUT, YEŞİL DUYMUŞ
25. Ogle RE, Sorensen SE, Lewis EA. A new visible light-cured resin system applied to removable prosthodontics. J Prosthet Dent 1986; 56: 497-506.
26. Chung RWC, Clark RK, Darvell BW. The bonding
of cold-cured acrylic resin to acrylic denture teeth.
Aust Dent J 1995; 40: 241-245.
27. Huggett R, John G, Jagger RG, Bates JF. Strength of the acrylic denture base tooth bond. Br Dent J
1982;153: 187-190.
28. Vallittu PK, Lassila VP, Lappalainen R. Wetting the repair surface with methyl metacrylate affects the transverse strength of repaired heat-polymerized resin. J Prosthet Dent 1994: 72: 639-643.
29. Yesil Z, Yılmaz A. An investigation of the bond strength of plastic teeth to heat-cured denture base resins. Ege Üniv Diş Hek Fak Derg 1999; 20:1-7.
30. Sorensen SE, Fjeldstad E. Bonding of plastic teeth to acrylic denture base material. J Dent Res 1961;
40: 776-779.
31. Papazoglou E, Vasilas AI. Shear bond strenths for composite and autopolymerized acrylic resins bonded to acrylic resin denture teeth. J Prosthet
Dent 1999; 82: 573-578.
32. Fletcher AM, Al-Mulla MA, Amin WM, Dodd AW, Richie GM. A method of improving the bonding between artificial teeth and PMMA. J Dent 1985;
13: 102-108.

Thank you for copying data from http://www.arastirmax.com