You are here

DIE SPACER UYGULAMASININ KURONUN TUTUCULUĞUNA ETKİSİNİN İNCELENMESİ

THE STUDY OF DİE SPACER APPLICATION EFFECT OrV THE RKTENTION OF CROWN

Journal Name:

Publication Year:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In this research, die spacer application effect on the retention of crown has been studied. With this purpose, the 30 extracted molars have been prepared for the production of full crown and the stone dies have been provided by taking Their impresstones. Die relief has not been applied on the fifteen of them. After producing the wax patterns for Lhe production of crown, the casting procedure has been made. Casts have been cemented after being adapted on teeth. Statistically it has been fixed that die spacer application's effect on the retention of crown is unimportant
Abstract (Original Language): 
Bu çalışmada, die spacer uygulamasının kuronun tutuculuğuna etkisi incelenmiştir. Bu amaçla, çekilmiş 30 adet büyük azı diş, full kuron yapımı için hazırlanmış ve bunların ölçüleri alınarak alçı güdükler elde edilmiştir. Die relief sadece 15 tanesinin ürerine uygulanmıştır. Kuron yapımı için mum modeller elde edildikten sonra döküm işlemi yapılmıştır. Dökümler dişler üzerine mumlandıktan sonra simante edilmiştir. Die spacer uygulamasını n kuronun tutuculuğuna etkisinin önemsiz olduğu, istatistiksel olarak lesbit edilmiştir.
13-16

REFERENCES

References: 

1. Assif IXRimcr V.The flow of zinco phosphate çemeni under a full-coverage restoration and its effect on marginal adaptation according to the location of cement application.Quintesscnce Int 1987; 18 ( II ): 765-74.
2. Basset RW. Solving the problems of cementing the full veneer cast gold crown. J Prosthct Dent 1966 ; 16: 740-7.
3. Bcrger
RP
. Kuronların iyi oturması için güdük model üzerinde yapılması gereken çalışmalar.Türk Diş Hekimliği için Quintcssenz 1986; 6: 521.
4. Buggers KJ, Bruggers A. Internal venting of casting to improve marginal seal and retention of castings. J Prosthet Denl 1987; 58 (3): 270-2.
5. Campagni WV. Preston JD, Reisbıck MH. Measurement of paint-on die spacers used for casting relief. J Prosthet Dent 1982; 47 (6) 606-11.
6. Campagni WV, Wright W, Martinoff JT. Effect of die spacer on the seating of complete cast gold crowns with grooves. J Prosthet Dent 1986, 55 (3); 324-8.
7. Cooper TM.Christensen GJ, l^aswcll HF, Baxter R. Effect of venting on cast gold full crowns. J Prosthct Dent 1971; 26 ( 6): 621-6.Donova
n T, Wright W, Campagni WV. Use of paint-on die spacers in preparations with grooves. J Prosthet Dent 1984; 52 (3): 384-8.
9. Eames WB, O'Neal SJ, Monteiro .1, et al Techniques to improve the seating of casting, J Am Dent Assoc 1978; 96 ( 3 ): 432-7.
10. Eliasson $T, and Lund MR. Improving marginal lit through finishing procedures, J Indiana State Dent Assoc 1974; 53 (6): 13-7.
11. Fusayama T, İde K_, Hosada H. Relief of resistance of cement of full cast crown. J Prosthct Dent 1964; 14: 95-9.
12. Fusayama. T, and Iwamoto T. Relationship between retaining force of inlays and film thickness of zinco phosphate cement. J EYosthetDent 1964; 14: 95-7.
13. Grajowcr R, Zuberi Y, Lewinstein I. Improving the fit of crowns with die spacers. J Prosthct Dent 1989: 61 (5): 555-63.
14. Hollenback GM. A practical contribution la the standardization of casting technique. J Am Dent Assoc 1928; 15: 1917-28. (Kaynak 20' den alınmıştır.)
15. Jorgensen KD, Ksbensen AL. The relationship between the lilm thickness of zinc phosphate cement and the retention of veneer crowns. Aeta Odontol Stand 1968; 26 £ 3 ): 169- 75.
16. Kayano K, hvoku M. Fusayama T. Pressuring techniques and cement thickness for east restorations, J Prosthct Dent 1978; 40 (5): 544-8.
17-Marker VA. Miller AW, Miller BH, and Swcptson JH: Factors affecting the retention and fit of gold castings. J Prosthet Dent 1987; 57 (4): 425-30,
18. Mc Cunc RJ, Phillips RW, Svvartz ML. Mumford G. The effect of occlusal venting and film thickness on the cementation of" full cast crowns. J Soutli Calif Dent Assoc 1971; 39 ( 1 ); 36-45.
19. Nortwick WT, Gettleman L. Effect of internal relief, vibration and venting on the vertical sealing of cemented crowns. J Prosthct Dent 1981; 45 (4): 395- 9
20. Pascoe DF. An evaluation of the marginal adaptation of cxtracoronal restorations during cementation. J Prosthet Dent 1983; 49 (5): 657- 62.
21. Pi In R, Cardash HS, Baharav H, Hdf M. Incomplete seating of cemented crowns: A literature review. J Prosthet Dent 1988; 59 (4) 429- 33.
22. Stanley GV, Micheal JK, Huge FH, The effect of die relief agent on the retention of full coverage eastings. 1 Prosthet Dent 1983; 50 ( 1 ): 20- 5.
23. Suthers MD, Wise MD, Influence of cementing medium on the accuracy of the remount procedure. J Prosthct Dent 1982; 47 (4): 377-83.
24. Tjan AH, Sarkissian R. Effect of multiple axial grooves on the marginal adaptation of full cast-gold crowns. J Prosthet Dent 1981; 46 (4); 399- 403.
25. Tjan AH, Sarkissian R. Comparison of internal escape channels with die spacing and occlusal venting. J Prosthct Dent 1985; 53 (5): 613-7.
26. Vcrmilyea SO, Kuffler MJ, Hugct EF. The effects of die relief agent on the retention of full coverage castings. .1 IVosthet Dent 1983; 50 (2): 207- 10.
27. Wang CJ, MHIstcin PL, and !^athanson D Kffects of cement, cement space, marginal design, scaling aid materials, and seating force crown cementation. J Prosthet Dent 1992; 67 (6)-786-90.

Thank you for copying data from http://www.arastirmax.com