Effects of Different Drying Methods of Mantı on Hydroxymethyl Furfural (HMF)
Formation and Sensory Quality
Journal Name:
- Cumhuriyet Üniversitesi Fen Fakültesi Fen Bilimleri Dergisi
Keywords (Original Language):
Abstract (2. Language):
Conventional hot-air drying methods are used in drying of mantı (stuffed pasta) in Turkey. These methods cause
quality losses in the product. Therefore search for alternative methods to the conventional drying has been underway. Infrared
(IR) drying process is an alternative technique for this purpose. The most important parameters in the drying processes are
drying temperature and its effects on the product. Hydroxymethyl furfural (HMF) formation is one of the indicators for illeffects
of temperature on the product quality. HMF is one of the nonenzymatic browning reaction products. As the amount of
HMF increases, the nutritional quality of the product decreases. In this study, IR drying (250 W), alone or in combination with
vacuum application, was used in drying of mantı as alternative to conventional hot-air drying, and HMF formation and sensory
properties of the product were investigated. It was found that the levels of HMF were lower and the sensory qualities were
higher in mantı samples dried by 250 W IR-vacuum combination than those dried by the conventional method (P<0,01). It was
concluded that different industrial drying methods for mantı, such as IR and vacuum combinations, should be investigated.
Bookmark/Search this post with
Abstract (Original Language):
Ülkemizde mantının kurutulmasında geleneksel sıcak hava yöntemleri kullanılmaktadır. Bu yöntemler üründe kalite
kayıplarına neden olmaktadır. Bu nedenle kurutma işlemi için geleneksel tekniklere alternatif yöntemler araştırılmaktadır.
Bu amaçla kullanılabilecek olan bir teknik infrared (IR) kurutma prosesidir. Kurutma proseslerinde en önemli parametreler
sıcaklık ve sıcaklığın ürün üzerine etkisidir. Sıcaklığın ürün üzerine olumsuz etkisini gösterebilecek maddelerden biri
hidroksimetil furfural (HMF) oluşumudur. HMF enzimatik olmayan esmerleşme reaksiyon ürünlerinden biridir. HMF
miktarı arttıkça ürünün besin değerinde düşüşler meydana gelmektedir. Araştırmada, bu olumsuzlukları önlemek amacıyla
mantının kurutulmasında geleneksel yönteme alternatif olarak 250 W IR kurutma yöntemi tek başına ve vakum
kombinasyonu olarak uygulanmış, oluşan HMF miktarları ve ürün duyusal özellikleri araştırılmıştır. Vakumla kombine
edilmiş 250 W IR kullanılarak kurutulan mantıların HMF miktarları geleneksel yönteme göre daha düşük ve duyusal
kaliteleri daha yüksek bulunmuştur (P<0,01). Sonuç olarak, mantının endüstriyel üretiminde IR kurutma ve vakum
uygulamasının kombine kullanımı gibi farklı kurutma metotlarının araştırılması gerektiği sonucuna varılmıştır.
FULL TEXT (PDF):
- 3