You are here

Home » Content

FİBER TAKVİYELİ POLİMER KOMPOZİT YAPRAK YAYLARIN GELİŞİMİ

DEVELOPMENT OF FIBER REINFORCED POLYMER COMPOSITE LEAF SPRINGS

Journal Name:

  • Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi

Publication Year:

  • 2013

Key Words:

Keywords (Original Language):

Author NameUniversity of Author
Abstract (2. Language): 
Aim of this study to review development of composite leaf springs and to sign new investigations. Knowing the composite materials in detail by improved studies, design attempts for fiber reinforced composite leaf springs are being increased. Fiber reinforced polymeric composite leaf springs produced with advantages of 85% weight reduction, improved fatigue life, better corrosion resistance and high natural frequency than steel leaf springs. In this paper important studies on polymeric composite leaf springs are reviewed and further studies announced.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışmanın amacı polimer kompozit yaprak yaylarda günümüze kadar olan gelişmeleri ele almak ve yapılacak yeni çalışmalara yol göstermektir. Kompozit malzemeler konusundaki araştırmaların ilerlemesi ile yaprak yayların fiber takviyeli polimer kompozit malzemelerden üretilmesine yönelik çalışmalar yapılmıştır. Bu çalışmalar neticesinde çelik yaprak yaylara nazaran polimer kompozit yaprak yaylar % 85’e varan hafiflik, daha yüksek yorulma ömrü, korozyona karşı yüksek direnç ve yüksek doğal frekans gibi avantajlara sahip olarak üretilebilmiştir. Bu makalede, polimer kompozit yaprak yaylar ile ilgili yapılmış olan önemli çalışmalar değerlendirilmiş ve yapılacak yeni çalışmalara yol gösterilmiştir.
FULL TEXT (PDF): 
PDF icon 3.pdf
  • 2
39-51
  • Turkish

REFERENCES

References: 

Al-Qureshi H. A. (2001): "Automobile Leaf Springs from Composite Materials", J. Materials Processing Technology, Cilt 118, s.58-61.
Hou J. P., Cherruault J. Y., Jeronimidis G., Mayer R. (2005): "Design, Testing, and Simulation of Fibre Composite Leaf Springs for Heavy Axle Loads", J. Strain Analysis, Cilt 40, 6, s.497-504.
Hou J. P., Cherruault J. Y., Nairne I., Jeronimidis G., Mayer R. M. (2007): "Evolution of the Eye-End Design of a Composite Leaf Spring for Heavy Axle Loads", Composite Structures, Cilt 78, s.351-358.
Mühendislik Bilimleri Dergisi Cilt : 15 No:2 Sayı :44 Sayfa No: 51
Landgraf R. W., Francis R. C. (1979):"Material and Processing Effects on Fatigue Performance of Leaf Springs", Society of Automotive Engineers (SAE), Technical Paper Series, 790407.
Kumar Senthil M., Vijayarangan S. (2007): "Analytical and Experimental Studies on Fatigue Life Prediction of Steel and Composite Multi-leaf Spring for Light Passenger Vehicles Using Life Data Analysis", Materials Science (Medziagotryra), Cilt 13, No. 2, s.141-145.
Rajendran I., Vijayarangan S. (2001): "Optimal Design of a Composite Leaf Spring Using Genetic Algorithms", Computers and Structures, Cilt 79, s.1121-1129.
Ramakrishna S. (1997): "Microstructural Design of Composite Materials for Crashworthy Structural Applications", Materials and Design, Cilt 18, No. 3, s.167-173.
SAE HS788 (1982): "Manual on Design and Application of Leaf Springs", Society of Automotive Engineers.
SAE J1528 (1990): "Fatiuge Testing Procedure for Suspension-Leaf Springs", Society of Automotive Engineers.
Sancaktar E., Gratton M. (1999): "Design, Analysis, and Optimization of Composite Leaf Springs for Light Vehicle Applications", Composite Structures, Cilt 44, s.195-204.
Shankar Shiva G. S., Vijayarangan S. (2006): "Mono Composite Leaf Spring for Light Weight Vehicle–Design, End Joint Analysis and Testing", Materials Science (Medziagotryra), Cilt 12, No. 3, s.220-225.
Shokrieh M. M., Rezaei D. (2003): "Analysis and Optimization of a Composite Leaf Spring", Composite Structures, Cilt 60, s.317-325.
Subramanian C., Senthilvelan S. (2009): "Development and Preliminary Performance Evaluation of Discontinuous Fibre Reinforced Thermoplastic Leaf Spring", J. Materials: Design and Applications", Cilt .223, s.131-142.
Subramanian C., Senthilvelan S. (2010): "Effect of Reinforced Fiber Length on the Joint Performance of Thermoplastic Leaf Spring", Materials and Design, Cilt 31, s.3733-3741.
Talib A. R. A., Ali A., Goudah G., Lah N. A. C., Golestaneh A. F. (2010): " Developing a Composite Based Elliptic Spring for Automotive Applications", Materials and Design, Cilt 31, s.475-484.

Thank you for copying data from http://www.arastirmax.com