You are here

Home » Content

PLAZMA PÜSKÜRTME YÖNTEMİ İLE DÖKME DEMİR ALTLIKLAR ÜZERİNE MOLİBDEN KAPLAMALAR

MOLYBDENUM COATINGS ON CAST-IRON SUBSTRATES BY PLASMA SPRAY SYSTEM

Journal Name:

  • Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi

Publication Year:

  • 2003

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In this study, Mo was deposited on cast-iron substrates using air plasma spray system. The coated samples were characterized by optical microscope, scanning electron microscope (SEM), X-Ray diffraction (XRD), image analyzer (LUCIA) and microhardness. The results demostrated that Mo coatings possess porosity, unmelted particle, oxides and inclusion. It was also found that microhardness values of Mo coatings decreased from the edge of the coating to cast-iron matrix.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışmada, dökme demir altlıklar plazma püskürtme yöntemi kullanılarak molibden ile kaplanmıştır. Kaplanmış numuneler, optik mikroskobu, taramalı elektron mikroskobu (SEM), X-Işınları difraktometresi (XRD), görüntü analiz cihazı (LUCIA) ve mikrosertlik cihazı ile karakterize edilmiştir. Sonuçlar, Mo kaplamaların porozite, ergimemiş, yarı-ergimemiş partikül, oksit ve inklüzyon içerdiğini göstermektedir. Ayrıca, mikrosertlik değerlerinin, kaplamadan altlığa doğru azaldığı tespit edilmiştir.
FULL TEXT (PDF): 
PDF icon 13-16.pdf
  • 1
173 – 179
  • Turkish

REFERENCES

References: 

Çelik E., Avcı E., Yılmaz F., (1997): “Evaluation of interface reactions in thermal barrier
ceramic coatings”, Surface and Coatings Technology, vol.97, pp.361-365.
Çelik E., Şengil I.A., Avcı E., (1997): “Effects of some parameters on corrosion behaviour of
plasma sprayed coatings”, Surface and Coatings Technology. vol.97, pp.355-360.
Çelik E., Avcı E., (1997): “Investigation of corrosion behaviour of decorated Al2O3 with
copper”, 5th European Conference on Advanced Materials, Processes and Applications,
Maastricht, April 21-23.
Çelik E., Demirkıran A.Ş., Avcı E., (1999): “Effect of grit blasting of substrate on corrosion
behaviour of plasma sprayed Al2O3 coatings”, Surface and Coatings Technology, vol.116-
119, pp.1061-1064.
Demirkıran A.S., Çelik E., Yargan M., Avcı E., (2001): “Oxidation behaviour of functionally
gradient coatings including different composition of cermets”, Surface and Coating
Technology, vol. 142-144, pp. 551-556.
Du H.L., Datta P.K., Burnell-Gray J.S., Guo X., (1995): “Influence of plasma-sprayed Mo
coating on sulphidation behaviour of Inconel 600 and Nimonic PE11 alloys”, Surface and
Coatings Technology, vol.76-77, pp.1-6.
Liu Z., Hua M., (1999): “Wear transitions and mechanisms in lubricated sliding of a
molybdenum coating”, Tribology International, vol. 32, pp. 499-506.
Özdemir I., Tekmen Ç., Okumuş S.C., Çelik E., (2002): “Thermal Behaviour Of Plasma-
Sprayed Mo Coating On Cast-Iron Substrate For Dissel Engine Motors”, 8TH Conference
on Plasma Surface Engineering, September 9-13, 2002, Garmisch-Partenkirchen,
Germany, Surface and Coatings Technology (in press).
Soykan S., Üstel F., Çelik E., Avcı E., (1997): “Investigation of friction and wear behaviours
of plasma-sprayed ceramic coatings”, Journal of Turkish Engineering and
Environmental Sciences, vol.21, No: 6, pp.417-423.
Tekmen Ç., Özdemir İ., Çelik E., (2002): “Failure Behaviour Of Functionally Gradient
Materials Under Thermal Cyclic Conditions”, 8TH Conference on Plasma Surface
Engineering, September 9-13, 2002, Garmisch-Partenkirchen, Germany, Surface and
Coatings Technology (in press).
Usmani S., Sampath S., (1999): “Time-dependent friction response of plasma-sprayed
molybdenum”, Wear, vol.225-229, pp.1131-1140.
Uyulgan B., Çetinel H., Özdemir I., Tekmen Ç., Okumuş S.C., Çelik E., (2002): “Friction and
Wear Properties of Mo Coatings on Cast-Iron Substrates”, 8TH Conference on Plasma
Surface Engineering, September 9-13, 2002, Garmisch-Partenkirchen, Germany, Surface
and Coatings Technology (in press).

Thank you for copying data from http://www.arastirmax.com