You are here

Home » Content

TEK FAZLI ÇİFT ÇIKINTILI KUTUPLU SABİT MIKNATISLI BİR MOTORUN SONLU ELEMAN ANALİZİ

FINITE ELEMENT ANALYSIS OF A SINGLE PHASE DOUBLYSALIENT POLE PERMANENT MAGNET MOTOR

Journal Name:

  • Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi

Publication Year:

  • 2006

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In this paper, the back emf induced in the stator windings and the electromagnetic torque developed by a single-phase doubly-salient permanent magnet motor is obtained using two dimensional finite element method. These quantities of a permanent magnet motor are required for the transient and steady state analysis. The magnetic vector potential distribution in the machine is obtained to compute induced back emf. There are several methods for calculating the torque by using data from numerical analysis of the magnetic field. Two out of these are Maxwell Stress Tensor and Co-energy Derivation which have been used to obtain no-load conditions in this study. The static torque at full-load are computed only by using Maxwell Stress Tensor Method. The results of the analysis as a function of rotor position have been presented here.
Bookmark/Search this post with
Abstract (Original Language): 
Bu makalede, stator sargılarında indüklenen gerilim ve tek fazlı çift değişken hava aralıklı sabit mıknatıslı motor tarafında üretilen elektromanyetik tork iki boyutlu sonlu elemanlar yöntemi kullanılarak elde edildi. Sabit mıknatıslı motorun bu büyüklükleri geçici ve kalıcı durum analizleri için gereklidir. İndüklenen gerilimi hesaplamak için manyetik vektör potansiyellerin motordaki dağılımı elde edilir. Manyetik alanın nümerik analizinden elde edilen veriler kullanılarak tork hesaplamanın çeşitli yöntemleri vardır. Bunlardan iki tanesi, bu çalışmada yüksüz koşullarda kullanılan Maxwell Stress Tensor ve Co-enerjinin Türevi yöntemleridir. Yük altındaki statik tork sadece Maxwell Stress Tensor Methodu kullanılarak hesaplanır. Rotor pozisyonunun fonksiyonu olarak analiz sonuçları burada sunulmuştur.
FULL TEXT (PDF): 
PDF icon arastirmax-tek-fazli-cift-cikintili-kutuplu-sabit-miknatisli-bir-motorun-sonlu-eleman-analizi.pdf
  • 3
1-9
  • Turkish

REFERENCES

References: 

Alhamadi M.A., Demerdash N.A. (1991): “Modeling of Effects of Skewing of Rotor
Mounted Permanent Magnets on the Performance of Brushless DC Motors”. IEEE Tran.
on Energy Conversion, C. 6, s. 721-729.
Chari M.V.K., Bedrosian G., D’Anglelo J., Konrad A. (1993): “Finite Element Applications
in Electrical Enginnering”, IEEE. Tran. on Magnetics, C. 29, s. 1306-1314.
Chen S., Binns K.J., Liu Z., Shimmin D.W. (1992): “Finite Element Analysis of the Magnetic
Field in Rare-Earth Permanent Magnet Systems with Consideration of Temperature
Dependence”, IEEE Tran. on Magnetics, C. 28, s.1303-1306.
Clenet S., Lefévre Y., Sadowski N., Astier S., Lajoie-Mazenc M. (1993): “Compensation of
Permanent Magnet Motors Torque Ripple by Means of Current Supply Waveshapes
Control Determined by Finite Element Method”, IEEE Tran. on Magnetics, C. 29, s. 2019-
2023.
Craiu O., Dan N., Badea A. (1995): “Numerical Analysis of Permanent Magnet DC Motor
Performance”, IEEE Tran. on Magnetics, C. 31, s. 3500-3502.
Deodhar R.P., Andersson S., Boldea I., Miller T.J.E. (1997): “The Flux Reversal Machine: A
New Brushless Doubly-Salient Permanent-Magnet Machine”, IEEE Transactions on
Industry Applications, C. 33, s. 925-934.
Ho S.L., Fu W.N., Wong H.C. (1995): “Status of the Application of Finite Element Analysis
in Induction Machines”, Kuşadası Turkey, ACEMP95 5-7 June, C. 1, s. 37-42.
Moallem M., Ong C.M. (1990): “Predicting the Torque of a Switched Reluctance Machine
from Its Finite Element Field Solution”, IEEE Tran. on Energy Conversion, C. 5, s. 733-
739.
Miller T.J.E., Rabinovici R. (1994): “Back-EMF Waveforms and Core Losses in Brushless
DC Motors”, IEE Proc. Electr. Power Appl., C. 141, s. 144-154.
Nehl T.W., Demerdash N.A.O. (1992): “Direct Current Permanent Magnet Motors in
Adjustable Speed Drives”, IEEE Tutorial on Adjustable Speed Drives, s. 86-108.
Petkovska L., Cundev M., Cvetkovski G. (1995): “FEM Concept of Optimisation in a DC
Permanent Magnet Motor”, Kuşadası Turkey, ACEMP 95, C. 2, s. 22-27.
Rizk J., Nagrial M. (1998): “Computation of Cogging Torque in Permanent Magnet
Machines”, İstanbul Turkey, ICEM 98, s. 1123-1127 .
Sadowski N., Lefevre Y., Lajoie-Mazenc M., Cros J. (1992): “Finite Element Torque
Calculation in Electrical Machines While Considering the Mouvement”, IEEE Tran. on
Magnetics, C. 28, s. 1410-1413.
Salon S., Bhatia S., Burow D. (1997): “Some Aspects of Torque Calculation in Electrical
Machines”, IEEE Tran .on Magnetics, C. 33, s. 2018-2021.
Wang C., Nasar S.A., Boldea I. (1999): “Three-Phase Flux Reversal Machine (FRM)”, IEE
Proc. Electr. Power Applications, C. 146, s. 139-146.

Thank you for copying data from http://www.arastirmax.com