Copper (II) ion selective electrode based on N,N′-Bis(Salicylidene)-2,2′-Dimethyl-1,3-Diaminopropan
Journal Name:
- Gazi Eğitim Fakültesi Dergisi
Key Words:
Keywords (Original Language):
| Author Name | University of Author | Faculty of Author |
|---|---|---|
Abstract (2. Language):
This study concerns with the use of the Schiff bases and their metal complexes as an
ionophore in the preparation of ion selective electrodes. A new PVC based copper(II)
ion selective electrode was prepared. The ionophore employed was the mixture N,N′-bis(salicylidene)-2,2′-dimethyl-1,3-diaminpropane Schiff base and its copper(II)
complex. The optimum membrane composition was determined by the change of the
ratio of PVC, 2-nitrophenyloctylether as the plastisizer, and the ionophore. The
sensitivity of the membrane against the copper(II) ions and its optimum pH range were
determined. The copper(II) solution were prepared as buffered at a pH value 5.5-6.0
and the ionic strength of the medium was adjusted with potassium nitrate. The working
range of the electrode was found to be 1x10
-1
– 5x10
-4
M with a slope near to Nerstian
value. The response time was also very short .
Bookmark/Search this post with
Abstract (Original Language):
Bu çalışmada, Schiff bazlarıve bunların bazımetal komplekslerinin iyon seçici elektrot
yapımında iyonofor olarak kullanılmasıamaçlanmıştır. Bakır (II) iyonuna duyarlıyeni
bir polivinilklorür (PVC) membran elektrot hazırlanmıştır. İyonofor olarak N,N′-bis(salisiliden)-2,2′-dimetil-1,3-diamino propan Schiff bazıve bu Schiff bazının bakır
(II) ile oluşturduğu kompleksin karışımıkullanılmıştır. Membranın hazırlanmasında
kullanılan (PVC), 2-nitrofeniloktileter (plastikleştirici) ve iyonoforun oranı
değiştirilerek optimum membran bileşimi belirlenmiştir. Hazırlanan elektrodun
bakır(II) iyonuna duyarlılığıtespit edildikten sonra optimum çalışma pH aralığı
bulunmuştur. Bakır(II) iyonu çözeltileri pH 5,5-6,0’a tamponlanmışve ortamın iyonik
şiddeti potasyum nitrat kullanılarak ayarlanmıştır. Elektrodun doğrusal çalışma
aralığının 1x10-1 –5x10-4M olduğu ve eğiminin Nernst eğimine yakın bir eğim (
27,7±1.0 mV) gösterdiği bulunmuştur. Ayrıca cevap süresinin ise oldukça kısa olduğu
görülmüştür.
FULL TEXT (PDF):
- 2
123-131