You are here

DENTIN BAĞLAYIC I SİSTEMLER VE HİBRİD TABAKANIN OLUŞTURULMASI

DENTIN BONDING SYSTEMS AND HYBRIDIZATION

Journal Name:

Publication Year:

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
Recently, with the development of adhesive dentistry, multistep dentin bonding to dental tissues was modified to simplified and more user friendly adhesive systems.The mechanism of adhesion is based on the mechanical interlocking within the formation of hybrid layer. Hibrization quality is effected by the type of the adhesive system, dental tissue, application method, materials consistence and physical and chemical properties. The aim of this review is to evaluate the hybridization quality of current adhesive systems.
Abstract (Original Language): 
Adeziv dişhekimliğindeki gelişmeler ile, çok aşamalı dentin bağlayıcı sistemler, uygulama zamanını ve aşamalarını azaltmak, kullanım kolaylığı sağlamak amacıyla daha kolaylaştırılmış ve az basamaklı sistemler geliştirilmiştir. Adeziv sistemlerin esas tutuculukları reçine monomerlerin diş dokularına infiltre olmasıyla ortaya çıkan hibrid tabaka ile gerçekleşir. Total-etch ve self-etch sistemler ile uzun süreli ve dirençli bir bağlanma amacıyla kaliteli bir hibrid tabaka elde etmek için dikkat edilmesi gerekenler bu makalede anlatılacaktır.
189
195

REFERENCES

References: 

1.
Ermis RB, De Munck J, Cardoso MV, Coutinho E, Kirsten L,Landuyt V, Poitevin A, Lambrechts P, van Meerbeek B. Bond strength of self-etch adhesives to dentin prepared with three different diamond burs. Dent Mater 2008; 2: 978-85.
2. Nakabayashi N, Kojima K, Masuhara E. The promotion of adhesion by the infiltration of monomers into tooth substrates. J Biomed Mater Res 1982; 16: 265-73.
3. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 2003; 28: 215-35.
4. Pashley DH, Carvalho RM. Dentine permeability and dentine adhesion. J Dent 1997;
25 (5): 355-72.
5. Carvalho RM, Chersoni S, Frankenberger R,
Pashley DH, Prati C, Tay FR. A challenge to
the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomater 2005; 26 (9):
1035-42.
6. Spencer P, Wang Y, Katz JL, Misra A. Physicochemical interactions at the dentin/adhesive interface using FTIR chemical imaging. J Biomed Opt 2005; 10 (3): 031104.
7. Wang Y, Spencer P, Walker MP. Chemical profile of adhesive/caries-affected dentin interfaces using Raman microspectroscopy. J Biomed Mater Res A 2006; 81: 279-86.
8. Yuan Y, Shimada Y, Ichinose S, Tagami J. Hybridization quality in cervical cementum and superficial dentin using current adhesives. Dent Mater 2008; 24: 584-93.
9. Erhardt MCG, Toledano M, Osorio R, Piment LA. Histomorphologic characterization and bond strength evaluation of caries-affected dentin/resin interfaces:Effects of long-term water exposure. Dent Mater 2008; 2: 786-98.
10. Kinney JH, Balooch M, Marshall GW, Marshall
SJ. A micromechanics model of the elastic properties of human dentine. Arch Oral Biol 1999; 44: 813-22.
11. Ersin NK, Uzel A, Aykut A, Candan U, Eronat C. Inhibition of cultivable bacteria by chlorhexidine treatment of dentin lesions treated with the ART technique. Caries Res 2006; 40: 172-7.
12. Hiraishi N, Yiu CK, King NM, Tay FR. Effect of 2% chlorhexidine on dentin microtensile bond strengths and nanoleakage of luting
cements. J Dent 2009; 37 (6): 440-8.
13. Fawzy AS, Amer MA, El-Askary FS. Sodium hypochlorite as dentin pretreatment for etch-and-rinse single-bottle and two-step self-etching adhesives: atomic force microscope and tensile bond strength evaluation. J Adhes Dent 2008; Feb; 10 (2): 135-44.
14. Cardoso MV, Coutinho E, Ermis RB, Poitevina A, Van Landuyt K, De Munck J, Carvalho RCR, Van Meerbeek R. Influence of dentin cavity surface finishing on micro-tensile bond strength of adhesives Dent Mater 2008; 24: 492-501.
15. Hossain M, Nakamura Y, Yamada Y, Kimura Y, Nakamura G, Matsumoto K. Ablation depths and morphological changes in human enamel and dentin after Er:YAG laser irradiation with or without water mist. J Clin Laser Med Surg 1999; 17: 105-9.
16. Chimello-Sousa DT, Souza AE, Chinelatti MA,
P ecora JD, Palma-Dibb RG, Corona SAM. Influence of Er:YAG laser irradiation distance on the bond strength of a restorative system to
enamel. J Dent 2006; 34: 245-51.
17. Cardoso MV, Coutinho E, Ermis RB, Poitevin A, Van Landuyt K, De Munck J, Carvalho RC, Lambrechts P, Van Meerbeek B. Influence of Er,Cr:YSGG laser treatment on the microtensile
194
bond strength of adhesives to dentin. J Adhese
Dent 2008; 10: 25-33.
18. Nakabayashi N, Pashley DH. Hybridization of dental hard tissues. Japan: Quintessence
Publishing 1998, p.37-56.
19. De Munck J, Vargas M, Iracki J, Van Landuyt K, Poitevin A, Lambrechts P, et al. One-day bonding effectiveness of new self-etch adhesives to bur-cut enamel and dentin. Oper
Dent 2005; 30: 39-49.
20. Tay FR, Pashley DH. Aggressiveness of contemporary self-etching systems. I. Depth of penetration beyond dentin smear layers. Dent
Mater 2001; 17: 296-308.
21. Ermis RB, De Munck J, Cardoso MV, Coutinho E, Van Landuyt KL, Poitevin A, Lambrechts P, Van Meerbeek B. Bond strength of self-etch adhesives to dentin prepared with three different diamond burs. Dent Mater 2008; 2:
978-85.
22. Yiu CK, Hiraishi N, King NM, Tay FR. Effect
of dentinal surface preparation on bond strength of selff etching adhesives. J Adhese Dent 2008; 10 (3): 173-82.
23. Pashley DH, Tay FR. Aggressiveness of contemporary selffetching adhesives. Part II. Etching effects on unground enamel. Dent
Mater 2001; 17: 430-44.
24. Miyazaki M, Platt JA, Onose H, Moore BK. Influence of dentin primer application methods on dentin bond strength. Oper Dent 1996; 21:
167-72.
25. Miyazaki M, Hinoura K, Kanamaru T, Koga K, Iwauchi H, Onose H. Study on light cured composite resin-influence of pretreated procedures for dentin surfaces on shear bond strength to dentin. Japan J Cons Dent 1991; 34:
734-41.
26. Jacobsen T, Söderholm KJ. Effect of primer solvent, primer agitation, and dentin dryness on shear bond strength to dentin. Am J Dent 1998;
11: 225-8.
27. Reis A, Pellizzaro A, Dal-Bianco K, Gomes OM, Patzlaff R, Loguercio AD. Impact of adhesive application to wet and dry dentin on long-term resin-dentin bond strengths. Oper
Dent 2007; 32: 380-7.
Şar Sancaklı H.
28. Camps J, Pashley DH. Buffering action of human dentin in vitro. J Adhes Dent 2000; 2:
39-50.
29. Gregoire G, Millas A. Microscopic evaluation of dentin interface obtained with 10 contemporary self-etching systems: correlation with their pH. Oper Dent 2005; 30: 481-91.
30. Takahashi A, Sato Y, Uno S, Pereira PNR,
Sano H. Effects of mechanical properties of adhesives on bond strength to dentin. Dent
Mater 2002; 18: 263-8.
31. Reis A, Grandi V, Carlotto L, Bortoli G, Patzlaff R, Accorinte ML, et al. Effect of smear layer thickness and acidity of selffetching solution on early and long-term bond strength to
dentin. J Dent 2005; 33: 549-59.
32. De Munck J, Van Landuyt K, Peumans M, Poitevin A, Lambrechts P, Braem M, et al. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res
2005; 84: 118-32.
33. Reis A, Albuquerque M, Pegoraro M, Mattei G, de Oliveira Bauer RJ, Grande RHM, Klein-Junior CA, Baumhardt-Neto R, Loguercio AD. Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin. J Dent
2008; 36 (5): 309-15.
34. Hashimoto M, Ohno H, Sano H, Kaga M, Oguchi H. In vitro degradation of resin-dentin bonds analyzed by microtensile bond test, scanning and transmission electron microscopy.
Biomater 2003; 24: 3795-803.
35. Hashimoto M, Tay FR, Ohno H, Sano H, Kaga M, Yiu C, et al. SEM and TEM analysis of
water degradation of human dentin collagen. J Biomed Mater Res 2003; 66: 287-98.
36. Carrilho M, et al. From dry bonding to water-wet bonding to ethanol-wet bonding. A review of the interactions between dentin matrix and solvated resins using a macromodel of the
hybrid layer. Am J Dent 2007; 20: 7-20.
37. Kanca 3rd J. Improving bond strength through acid etching of dentin and bonding to wet dentin surfaces. J Am Dent Assoc 1992;123:
35-43.
Dentin
Bağlayıcı Sistemler ve Hibrid Tabakanın Oluşturulması
38. Tay FR, Pashley DH. Have dentin adhesives become too hydrophilic? J Can Dent Assoc
2003; 69: 726-31.
39. Nishitani Y, Yoshiyama M, Donnelly AM, Agee KA, Sword J, Tay FR, et al. Effects of
resin hydrophilicity on dentin bond strength. J
Dent Res 2006; 85: 1016-21.
40. Tay FR, Pashley DH, Kapur RR, Carrilho MR,
Hur YB,
Garret
t LV, et al. Bonding BisGMA to dentin—a proof of concept for hydrophobic dentin bonding. J Dent Res 2007; 86: 1034-9.
41. Wang Y, Spencer P. Hybridization efficiency of the adhesive/dentin interface with wet bonding. J Dent Res 2003; 82: 141-5.
42. Becker TD, Agee KA, Joyce AP, Rueggeberg
FA, Borke JL, Waller JL, et al. Infiltration/evaporation-induced shrinkage of demineralized dentin by solvated model adhesives. J Biomed Mater Res B Appl
Biomater 2007; 80: 156-65.
195
43. Nishitani Y, Yoshiyama M, Donnelly AM, Agee KA, Sword J, Tay FR, et al. Effects of
resin hydrophilicity on dentin bond strength. J
Dent Res 2006; 85: 1016-21.
44. TP Shin, X Yao, R Huenergardt, MP Walker, Y Wang. Morphological and chemical characterization of bonding hydrophobic adhesive to dentin using ethanol wet bonding technique. Dent Mater 2009: 2; 1050-1057.
45. K. Hosaka, Y. Nishitani, J. Tagami, M. Yoshiyama, W.W. Brackett, K.A. Agee, F.R. Tay and D.H. Pashley Durability of Resin-Dentin Bonds to Water- vs. Ethanol-saturated
Dentin J Dent Res 2009; 88: 146.
46. L Breschi, A Mazzoni, A Ruggeri, M Cadenaro, R Di Lenarda, E De Stefano Dorigo Dental adhesion review: Aging and stability of the bonded interface. Dent Mater 2008; 2 (4): 90¬101.

Thank you for copying data from http://www.arastirmax.com