You are here

FARKLI SİSTEM VE MATERYALLERLE ÜRETİLEN ZİRKONYA ALT YAPILARIN KENAR UYUMLARININ KARŞILAŞTIRILMASI

Comparison of Marginal Fit of Zirconia Copings Produced by Different Systems and Materials

Journal Name:

Publication Year:

Keywords (Original Language):

Abstract (2. Language): 
Purpose: The aim of this study was to compare marginal fit of zirconia copings produced by different systems and materials. Material and Methods: Tooth preparation with circumferential shoulder was performed on maxillary premolar acrylic tooth model. Copings (n=10) were produced with 5 different system-zirconia blocks (Cerec-InCoris ZI, Everest-BioZH, Celay-In-Ceram Zirconia, Zirkonzahn-IceZirkon ve Lava-Frame Zirconia) on prepared tooth model. Metal copings (Ni-Cr) were used as a control group. Marginal discrepancy of copings were measued with a stereomicroscope. Statistical analysis was performed with One-way ANOVA and Bonferonni test (p<0.05). Results: Marginal discrepancy mean values of goups were listed from lowest to highest as: Lava< Cerec<Everest<Zirkonzahn<Celay<Metal casting. Ni-Cr group showed higher marginal discrepancy values compared with other systems and this difference was statistically significant (p<0.01). Mean values of Celay and Zirkonzahn groups were found to be statistically significantly higher than Cerec and Lava groups (p<0.05). Conclusion: Manufacturing technique and material were both found to be effective on marginal fit of zirconia copings.
Abstract (Original Language): 
Amaç: Bu çalışmanın amacı farklı sistem ve zirkonya materyalleri kullanılarak üretilen kuron alt yapılarını kenar uyumu açısından karşılaştırmaktır. Gereç ve Yöntem: Akrilik üst küçük azı diş modeli üzerinde basamaklı diş preparasyonu yapıldı. Hazırlanan preparasyon üzerine beş farklı sistem-zirkonya esaslı blok (Cerec-InCoris ZI, Everest-BioZH, Celay-In-Ceram Zirconia, Zirkonzahn-IceZirkon ve Lava-Frame Zirconia) kullanılarak alt yapılar üretildi (n=10). Kontrol grubu olarak kıymetsiz metal alaşımından (Ni-Cr) elde edilen metal alt yapılar kullanıldı. Alt yapıların kenar açıklık değerleri stereomikroskop yardımıyla ölçüldü. Elde edilen verilerin istatistiksel analizi Tek-yönlü varyans analizi ve Bonferroni testi yardımıyla p<0.05 düzeyinde değerlendirildi. Bulgular: Kenar açıklığı değerleri en düşükten yükseğe göre Lava<Cerec<Everest<Zirkonzahn<C elay<Metal döküm şeklinde sıralandı. Ni-Cr grubunun ölçümleri; diğer tüm grupların alt yapı ölçümlerinden istatistiksel olarak anlamlı düzeyde yüksek bulundu (p<0.01). Celay ve Zirkonzahn gruplarının kenar açıklık ortalamasının, Cerec ve Lava gruplarından istatistiksel olarak anlamlı düzeyde yüksek olduğu tespit edildi (p<0.05). Sonuç: Hem üretim tekniği hem de kullanılan materyal alt yapının kenar uyumu üzerinde etkili bulundu.
28
37

REFERENCES

References: 

1- Raigrodski AJ. Contemporary materials
and technologies for all-ceramic fixed
partial dentures: a review of the literature. J
Prosthet Dent, 2004; 92(6): 557-62.
2- Yılmaz H, Aydın C, Gul BE. Flexural
strength and fracture toughness of dental core
ceramics. J Prosthet Dent, 2007; 98: 120-28.
3- Guazzato M, Albakry M, Ringer SP,
Swain MV. Strength, fracture toughness and
microstructure of a selection of all-ceramic
materials: part II. Zirconia-based dental ceramics.
Dent Mater, 2004; 20(5): 449-56.
4- Cehreli MC, Kökat AM, Akça K. CAD/
CAM Zirconia vs. slip-cast glass-infiltrated
Alumina/Zirconia all-ceramic crowns: 2-year
results of a randomized controlled clinical
trial. J Appl Oral Sci, 2009; 17(1): 49-55.
5- Karataşli O, Kursoğlu P, Capa N, Kazazoğlu
E. Comparison of the marginal fit
of different coping materials and designs
produced by computer aided manufacturing
systems. Dent Mater J, 2011; 30(1): 97-102.
6- Korkut L, Cotert HS, Kurtulmus H.
Marginal, internal fit and microleakage of
zirconia infrastructures: an in-vitro study.
Oper Dent, 2011; 36(1): 72-79.
7- Rossetti PH, do Valle AL, de Carvalho
RM, De Goes MF, Pegoraro LF. Correlation
between margin fit and microleakage in
complete crowns cemented with three luting
agents. J Appl Oral Sci, 2008; 16(1): 64-69.
8- Tinschert J, Natt G, Mautsch W, Spiekermann
H, Anusavice KJ. Marginal fit
of alumina-and zirconia-based fixed partial
dentures produced by a CAD/CAM system.
Oper Dent, 2001; 26(4): 367-74.
9- Beuer F, Aggstaller H, Edelhoff D, Gernet
W, Sorensen J. Marginal and internal fits
of fixed dental prostheses zirconia retainers.
Dent Mater, 2009; 25(1): 94-102.
10- Yüksel E, Zaimoğlu A. Influence of
marginal fit and cement types on microleakage
of all-ceramic crown systems. Braz
Oral Res, 2011; 25(3): 261-66.
11- Kohorst P, Junghanns J, Dittmer MP,
Borchers L, Stiesch M. Different CAD/
CAM-processing routes for zirconia restorations:
influence on fitting accuracy. Clin
Oral Investig, 2011; 15(4): 527-36.
12- McLean JW, von Fraunhofer JA. The
estimation of cement film thickness by an
in vivo technique. Br Dent J, 1971; 131(3):
107-11.
13- Suárez MJ, González de Villaumbrosia
P, Pradíes G, Lozano JF. Comparison of
the marginal fit of procera allceram crowns
with two finish lines. Int J Prosthodont, 2003;
16(3): 229-32.
14- Ural Ç. Beş farklı seramik restorasyon
yapım yönteminde marjinal uyumların
in-vitro olarak değerlendirilmesi. Doktora
Tezi, Ondokuz Mayıs Üniversitesi Sağlık
Bilimleri Enstitüsü Protetik Diş Tedavisi
Anabilim Dalı, 2006.
15- Hmaidouch R, Neumann P, Mueller
WD. Influence of preparation form, luting
space setting and cement type on the marginal
and internal fit of CAD/CAM crown
copings. Int J Comput Dent, 2011; 14(3):
219-26.
16- Quante K, Ludwig K, Kern M. Marginal
and internal fit of metal-ceramic crowns
fabricated with a new laser melting technology.
Dent Mater, 2008; 24(10): 1311-15.
17- Bindl A , Mörmann WH. Fit of allceramic
posterior fixed partial denture frameworks
in vitro. Int J Periodontics Restorative
Dent, 2007; 27(6): 567-75.
18- Kohorst P, Brinkmann H, Li J, Borchers
L, Stiesch M. Marginal accuracy of
four-unit zirconia fixed dental prostheses
fabricated using different computer-aided design/
computer-aided manufacturing systems.
Eur J Oral Sci, 2009; 117(3): 319-25.
P. Gültekin, D. Şen, M. Aydın
37
19- Yeo IS, Yang JH, Lee JB. In vitro marginal
fit of three all-ceramic crown systems.
J Prosthet Dent, 2003; 90(5): 459-64.
20- Olivera AB, Saito T. The effect of die
spacer on retention and fitting of complete
cast crowns. J Prosthodont, 2006; 15(4):
243-49.
21- Nakamura T, Dei N, Kojima T, Wakabayashi
K. Marginal and internal fit of
Cerec 3 CAD/CAM all-ceramic crowns. Int
J Prosthodont, 2003; 16(3): 244-48.
22- Kohorst P, Brinkmann H, Dittmer
MP, Borchers L, Stiesch M. Influence of
the veneering process on the marginal fit
of zirconia fixed dental prostheses. J Oral
Rehabil, 2010; 37(4): 283-91.
23- Lee KB, Park CW, Kim KH, Kwon
TY. Marginal and internal fit of all-ceramic
crowns fabricated with two different CAD/
CAM systems. Dent Mater J, 2008; 27(3):
422-46.
24- Beuer F, Edelhoff D, Gernet W, Naumann
M. Effect of preparation angles on
the precision of zirconia crown copings fabricated
by CAD/CAM system. Dent Mater
J, 2008; 27(6): 814-20.

Thank you for copying data from http://www.arastirmax.com