Journal Name:
- İstanbul Üniversitesi Mühendislik Fakültesi Mühendislik Bilimleri Dergisi
Keywords (Original Language):
| Author Name | University of Author | Faculty of Author |
|---|---|---|
Abstract (2. Language):
The expected result from efficient blasting; desirable distribution of particle size, obtaining a mass is homogeneous and well beyond, environmental impact such as rock throwing and vibration may be below damaging levels. Blasting performance is determined as a result of observation and measurement before and after blasting. With the development of technology, used equipment and applicable method have increased in this area. Especially developments of laser and digital image processing have contributed to the success of the blasting in recent years. With laser scanning device can scan bench face, in the computer model can be created digitally and distribution of particle size of the mass can be determined with digital image processing techniques after blasting.
Within the scope of this study in the design of bench blasting, the results of blasting efficiency and environmental sense as an important parameter affecting the burden was analyzed and the effects of the blasting results that burden can change along the face was to investigate the effect. Laser scanning device and digital image processing software was used in this scope, the data obtained from a blast was done The Quarry belong to Koc Company at Ömerli in Istanbul was analyzed. Obtained as a result of the analysis empirical approaches was developed variable in different parts of the face burden between the blasting results. The differences was realized that between actual size distribution as a result of blasting with the Kuz-Ram model has the resulting estimate of fragmentation that depending on the burden has differences from Laser scanning results that obtained along the face. Between the burden has differences depending on the face profile with size distribution that relationship were investigated.
Bookmark/Search this post with
Abstract (Original Language):
Verimli bir patlatmadan beklenen; arzu edilen parça boyut dağılımına sahip, homojen ve iyi ötelenmiş bir yığın elde edilmesi, kaya fırlaması ve titreşim gibi çevresel etkilerin zarar verebilecek seviyelerin altında olmasıdır. Patlatma performansı, patlatma öncesi ve sonrası birtakım gözlem ve ölçüm çalışmaları sonucu saptanır. Teknolojinin gelişimiyle, bu alanda kullanılan ekipmanlar ve uygulanan metotlar da artmıştır. Özellikle lazer ve dijital görüntü işleme alanındaki gelişmeler patlatma çalışmalarının başarısına son yıllarda büyük katkılar sağlamıştır. Lazer tarama cihazları ile patlatma yapılacak basamak aynası taranabilmekte ve sayısal olarak bilgisayarda modeli oluşturulabilmekte, dijital görüntü işleme tekniği ile patlatma sonrası oluşan yığının parça boyut dağılımı tespit edilebilmektedir.
Bu çalışmada basamak patlatma tasarımında, patlatma sonuçlarını verimlilik ve çevresel anlamda önemli şekilde etkileyen dilim kalınlığı parametresi incelenmiş ve dilim kalınlığının ayna boyunca gösterebildiği değişikliklerin patlatma sonuçlarına olan etkileri araştırılmıştır. Lazer profil çıkarma cihazı ve dijital görüntü işleme yazılımı bu kapsamda kullanılmış, Ömerli’de Koç Hafriyat Taş Ocağı’nda yapılan atımdan elde edilen veriler analiz edilmiştir. Lazerli tarama sonucu elde edilen ayna boyunca değişiklik gösteren dilim kalınlıklarına bağlı olarak Kuz-Ram tahmin modelinde elde edilen tahmini parçalanma ile patlatma sonucu oluşan gerçek parça boyut dağılımı arasındaki farklılıklar ortaya koyulmuş ve basamak ayna profiline bağlı olarak değişen dilim kalınlıkları ile yığının parça boyut dağılımı arasındaki ilişki incelenmiştir.
FULL TEXT (PDF):
- 1
19-31