You are here

SUPERVISORY-PLUS-REGULATORY CONTROL DESIGN FOR EFFICIENT OPERATION OF INDUSTRIAL FURNACES

Journal Name:

Publication Year:

Abstract (2. Language): 
A two-level system engineering design approach to integrated control and supervision of industrial multi-zone furnaces has been elaborated and tested. The application case study is the three-zone 25 MW RZS furnace plant at Skopje Steelworks. The integrated control and supervision design is based on combined use of general predictive control optimization of set-points and steady-state decoupling, at the upper level, and classical two-term laws with stady-state decouling, at the executive control level. This design technique exploits the intrinsic stability of thermal processes and makes use of constrained optimization, standard non-parametric time-domain process models, identified under operating conditions, using truncated k-time sequence matrices, controlled autoregressive moving average models. Digital implementations are sought within standard computer process control platform for practical engineering and maintenance reasons.
1199-1218

REFERENCES

References: 

[1] H. H. Rosenbrock, “The future of control.”
Automatica, vol. 13, pp. 388-392, 1977.
[2] G. Dimirovski, N. E. Gough, and S. Barnett,
“Categories in systems and control theory.” Int.
J. Systems Sci., vol. 8, no. 9, 1089-1090, 1977.
[3] G. M. Dimirovski, R. Hanus and R. M.
Henry, “Complex systems control in energy,
industry and transport technologies:
Contributions to intelligent automation.”
J.E.C.&T. Engineering, vol. 1, no. 1, pp. 1-22,
1996.
[4] D. Clarke, C. Mohtadi, and P. Tuffs,
“Generalized predictive control” (Pts. I and II).
Automatica, vol. 23, no. 2, pp. 137-160, 1987.
[5] T. Tsang and D. Clarke, “Generalised
predictive control with input constraints.” IEE
Proceedings Pt. D Control Theory and
Applications, vol. 135, no. 6, pp. 451-460, 1988.
[6] R. Demircioglu and D. Clarke, “CGPC with
guaranteed stability properties.” IEE
Supervisory-Plus-Regulatory Control Design For Efficient Operation Of Industrial Furnaces
Zhivko A. ICEV, Jun ZHAO, Mile J. STANKOVSKI,
Tatyana D. KOLEMISEVSKA-GUGULOVSKA, Georgi M. DIMIROVSKI
1216
Proceedings Pt. D Control Theory and
Applications, vol. 139, no. 4, pp. 371-380, 1992.
[7] G. M. Dimirovski, Learning Identification
and Design of Industrial Furnace Control
Systems, in P. Albertos and A. Sala (eds.)
Lecture Notes on Iterative Identification and
Control Design, Pt. III Experimental Modeling
and Control Applications, pp. 259-287. Valencia,
ES: European Science Foundation and Systems
Engineering & Control Department of the
Polytechnic University of Valencia, 2000.
[8] A. Ivanoff, “Theoretical foundations of the
automatic regulation of temperature.” J. Inst.
Fuel, vol. 7, pp. 117-130; discussion on pp. 130-
138, 1934.
[9] J. Rhine and R. Tucker, Modeling of Gas-
Fired Furnaces and Boilers. New York and
London: McGraw-Hill, 1991.
[10] Y. Y. Yang and Y. Z. Lu , “Dynamic model
based optimization control for slab reheating
furnaces.” Computers in Industry, vol. 10, pp.
11-20, 1988.
[11] J. Zhao, Hybrid Control for Global
Stabilization of a Class of Systems, in Advanced
Topics in Nonlinear Control Systems, Chapter 4,
pp. 129-160. Singapore, SG: World Scientific,
2001.
[12] G. M. Dimirovski, A. Dourado, E. Ikonen,
U. Kortela, J. Pico, B. Ribeiro, M. J. Stankovski,
and E. Tulunay (2001), Learning Control of
Thermal Systems, in K. Astroem, P. Albertos, M.
Blanke, A. Isidori, W. Schaufelberger, and R.
Sanz (eds.) Control of Complex Systems, Chapter
14, pp. 317-337. London: Springer-Verlag Ltd,
2001.
[13] Y. Y. Yang and Y. Z. Lu, “Development of
a computer control model for slab reheating
furnaces.” Computers in Industry, vol. 7, pp.
145-154, 1986.
[14] Y. Z. Lu, “The new generation of advanced
process control.” Control Engineering, March,
1992.
[15] Y. Z. Lu and T. J. Williams, “Computer
control strategies of optimal state feedback
methods for the control of steel mill soaking
pits.” ISS Transactions, vol. 2, pp. 35-43, 1983.
[16] T. E. Marlin, Process Control: Designing
Processes and Control Systems for Dynamic
Performance (2nd edition). Boston, MA:
McGraw-Hill, 2000.
[17] K. Ogata, Modern Control Engineering (4th
edition). Upper Saddle River, NJ: Prentice-Hall,
2002.
[18] M. Stankovski, G. Dimirovski, Z. Gacovski,
and E. Tulunay, “A two-level system for
industrial furnace control and supervision using
iterative identification and design'', in P. M.
Frank (ed.) Proceedings of European Control
Conference, Karlsruhe, DE, August 31 -
September 3, Paper F1035-5, p.1019.
Duesseldorf, DE: The EUCA and VDI/VDEGMA
Pub., 1999.
[19] R. Ellis, X. Li, and J. Riggs, “Modeling and
optimization of a model IV fluidized catalytic
cracking unit.” AIChE Journal, vol. 44, no. 9, pp.
2068-2079, 1998.
[20] V. Becera, Z. Abu-el-zee, and P. Roberts,
“Integrating predictive control and economic
optimization.” Computing & Control Eng. J., pp.
198-208, October 1999.
[21] A. Zheng, R. Manajanam, and J. Douglas,
“Hierarchical procedure for plant wide control
system synthesis.” AIChE Journal, vol. 45, no. 6,
pp. 1255-1265, 1999.
[22] C. Munoz and A. Cipriano, “An integrated
system for supervision and economic optimal
control of mineral processing plants.” Minerals
Engineering, vol. 12, no. 6, pp. 627-643, 1999.
[23] C. De Prada and A. Valentin, “Set point
optimization in multivariable constrained
predictive control,” in Proceedings of the 13th
World Congress of the International Federation
of Automatic Control, June 30 - July 5, San
Francisco, pp. 351-356. Oxford, UK: Pergamon
Press, 1996.
[24] J. Richalet, A. Rault, J. Testud, and J.,
Papan, “Model predictive heuristic control:
applications to industrial processes.” Automatica,
vol. 14, pp. 413- 428, 1978.
[25] J. Richalet, “Observations on model based
predictive control.” Control Engineering,
August, pp. 39-41, 1992.
Supervisory-Plus-Regulatory Control Design For Efficient Operation Of Industrial Furnaces
Zhivko A. ICEV, Jun ZHAO, Mile J. STANKOVSKI,
Tatyana D. KOLEMISEVSKA-GUGULOVSKA, Georgi M. DIMIROVSKI
1217
[26] C. Garcia, D. Prett, and M. Morari, “Model
predictive control: theory and practice - a
survey.” Automatica, vol. 25, no. 3, pp. 335-348,
1989.
[27] D. Clarke, Editor, Advances in Model Based
Predictive Control. Oxford, UK: Oxford
University Press, 1994.
[28] F. Allgower, T. Badgwell, J. Qin, J.
Rawlings, and S. Wright, Nonlinear Predictive
Control and Moving Horizon Estimation - An
Introductory Overview, in P. M. Frank (ed.)
Advances in Control: Highlights of ECC'99, pp.
391-449. London: Springer-Verlag, 1999.
[29] R. Ansari and M. Tade, Non-linear Modelbased
Process Control. London: Springer-Verlag
Ltd, 2000.
[30] E. Camacho, “Constrained generalized
predictive control.” IEEE Trans. on Automatic
Control, vol. 38, no. 2, pp. 327-332, 1993.
[31] E. Camacho and C. Bordons, Model
Predictive Control. London: Springer-Verlag
Ltd, 1998.
[32] G. M. Dimirovski and Z. A. Icev, Study of a
Two-Level Supervisory-plus-Regulatory Control
System for RZS Pusher Furnace Using Model
Predictive Control Strategies, FEE-ASE Techn.
Report GPC-TSC-01/03 (in Macedonian).
Skopje, MK: SS Cyril and Methodius University,
2003.
[33] A. Cipriano and M. Ramos, “A fuzzy model
based predictive controller and its application to
a mineral flotation plant.” Journal A: Benelux
Quarterly J. on Automatic Control, vol. 36, no.
2, pp. 29-36, 1995.
[34] Y. Z. Lu and S. W. Markward,
“Development and applications of an integrated
neural system for hot-deep coating-line,” in
Proceedings of the 1995 American Control
Conference, Seattle, WA. New York: The IEEE
and American Automatic Control Council, 1995.
[35] M. Katebi and M. Johnson, “Predictive
control design for large-scale systems.”
Automatica, vol. 33, no. 3, pp. 421-425, 1997.
[36] A. Bemporad, A. Casavola, and E. Mosca,
“Nonlinear control of constrained linear systems
via predictive reference management.” IEEE
Trans. on Automatic Control, vol. 42, no. 3, pp.
340-349, 1997.
[37] E. Mosca and J. Zhang, “Stable redesign of
predictive control.” Automatica, vol. 28, no. 6,
pp. 1229-1233, 1992.
[38] D. Angeli and E. Mosca, “Command
governors for constrained nonlinear systems.”
IEEE Transactions on Automatic Control, vol.
44, no. 4, pp. 816- 820, 1999.
[39] D. G. Luenberger, Linear and Nonlinear
Programming. Reading, MA: Addison-Wesley,
1984.
[40] J. Zhao, “A solution to the nonlinear optimal
control problems,” in Proceedings of the 32nd
IEEE Conf. on Decision and Control, vol. 4, pp.
2999-3002. New York: IEEE, 1993.
[41] J. Martin Sanchez and J. Rodellar, Adaptive
Predictive control: From the Concepts to Plant
Optimization. London: Prentice Hall Intl., 1996.
[42] G. Dimirovski, B. Percinkova, T.
Kolemisevska-Gugulovska, Z. Icev, M.
Kamilovski, D. Mihajlov, Lj. Panovski, An
Investigation Study on Control and Automation
of RZS Three-zone Industrial Furnace for Slabs.
ASE Technical Report RZS-07/89, Faculty of
Electrical Engineering, Skopje, 1989 (in
Macedonian).
[43] L. Ljung, System Identification: Theory for
the User (2nd edition). Upper Saddle River, NJ:
Prentice Hall PTR, 1999.
[44] Z. A. Icev, Non-Conventional Controllers
for Supervisory-Regulatory Control of Furnaces
for Steel Slabs: Analytical and Qualitative
Approach (PhD dissertation). Skopje, MK: SS
Cyril and Methodius University, 2004 (in
preparation).
[45] J. Espinosa, M. Radjili, V. Wertz, and J.
Vandewalle, “Predictive control using fuzzy
models - comparative study”, in P. M. Frank
(ed.) Proceedings of European Control
Conference, Karlsruhe, DE, August 31 -
September 3, p.273. Duesseldorf, DE: The
EUCA and VDI/VDE-GMA Pub., 1999.
Supervisory-Plus-Regulatory Control Design For Efficient Operation Of Industrial Furnaces
Zhivko A. ICEV, Jun ZHAO, Mile J. STANKOVSKI,
Tatyana D. KOLEMISEVSKA-GUGULOVSKA, Georgi M. DIMIROVSKI
1218
[46] J. Espinosa and J. Vandewalle, Predictive
Control Using Fuzzy Models, in R. Roy, T.
Furuhashi, and K. Pravir K. (eds.) Advances in
Soft Computing Engineering Design and
Manufacturing, pp. 187-200. London: Springer-
Verlag Ltd, 1999.
[47] H. Nounou and K. Passino, “Fuzzy model
predictive control: techniques, stability issues,
and examples,” in Proceedings of the I999 IEEE
International Symposium on Intelligent Control,
Intelligent Systems & Semiotics, ISIC'99,
Cambridge, September 15-17, pp. 423-428.
Piscataway, NJ: The IEEE, 1999.

Thank you for copying data from http://www.arastirmax.com