You are here

PROPAGATION PROPERTIES AND SCATTERING PARAMETERS OF INHOMOGENEOUSLY LOADED RECTANGULAR WAVEGUIDES

Journal Name:

Publication Year:

Abstract (2. Language): 
In this study mode matching technique is used to obtain scattering parameter representations of waveguides loaded inhomogeneously with lossless dielectrics in the cross-sectional direction. The accuracy of our numerical solutions are assessed by comparing our results both with measured data and also, whenever available, with the results reported in the literature. Numerical results are presented to display the dependence of the scattering parameters on the electrical properties and geometrical dimensions of such structures.
1287-1293

REFERENCES

References: 

[1] R. E. Collin, Field Theory of Guided Waves,
The Institute of Electrical and Electronics
Engineers, Inc., New York, 1991.
[2] P. H. Vartanian, W. P. Ayres, A. L.
Helgesson, “Propagation in dielectric slab loaded
rectangular waveguides,” IRE Trans. Microwave
Theory Tech., 1957.
[3] R. Seckelmann, “ Propagation of TE modes
in dielectric loaded waveguides”, IEEE Trans.
Microwave Theory Tech., vol. MTT-14, No. 11,
pp. 518-527 , Nov. 1966.
Propagation Properties And Scattering Parameters Of Inhomogeneously Loaded Rectangular Waveguides
Serkan ŞİMŞEK, Ercan TOPUZ, Cevdet IŞIK
1293
[4] K. F. Casey, “ On inhomegeneously filled
rectangular waveguides”, IEEE Trans.
Microwave Theory Tech., pp. 566-567 , Aug.
1973.
[5] F. E. Gardiol, “ Higher-order modes in
dielectrically loaded rectangular waveguides”,
IEEE Trans. Microwave Theory Tech., vol.
MTT-16, No. 11, pp. 919-924 , Nov. 1968.
[6] S. Yoshikado, I. Taniguchi, “ Microwave
complex conductivity of a square post in
rectangular waveguide”, IEEE Trans. Microwave
Theory Tech., vol. MTT-37, No. 6, pp. 984-992,
June, 1989.
[7] J. Baker-Jarvis., E. J. Vanzura, W. A.
Kissick, “ Improved technique for determining
complex permittivity with the transmission/
reflection method”, IEEE Trans. Microwave
Theory Tech., vol. MTT-38, No. 8, pp. 1096-
1103, Aug. 1990.
[8] J. M. Jarem, J. B Johnson, W. S. Albritton,
“Measuring the permittivity and permeability of
a sample at Ka band using a partially filled
waveguide”, IEEE Trans. Microwave Theory
Tech., vol. MTT-43, No. 12, pp. 2654-2667,
Dec. 1995.
[9] J. M. Catala-Civera, A. J. Canos, F. L.
Peneranda-Foix, E. L. Davo, “ Accurate
determination of the complex permittivity of
materials with transmission reflection
measurements in partially filled rectangular
waveguides”, IEEE Trans. Microwave Theory
Tech., vol. MTT-51, No. 1, pp. 16-24, Jan. 2003.
[10] K. Siakavara, J. N. Sahalos, “ The
discontinuity problem of a rectangular dielectric
post in rectangular waveguide”, IEEE Trans.
Microwave Theory Tech., vol. MTT-39, No. 9,
pp. 1617-1622, Sep. 1991.
[11] J. Abdulnour, L. Marchildon, “ Scattering
by dielectric obstacle in rectangular waveguide”,
IEEE Trans. Microwave Theory Tech., vol.
MTT-41, No. 11, pp. 1988-1994, Nov. 1993.
[12] Y. Leviatan, P. G. Li, A. T. Adams, J.
Perini, “Single post inductive obstacle in
rectangular waveguide”, IEEE Trans. Microwave
Theory Tech., vol. MTT-31, No. 10, pp. 806-
812, Oct. 1983.
[13] P. G. Li, A. T. Adams, Y. Leviatan, J.
Perini,“Multiple post inductive obstacles in
rectangular waveguide”, IEEE Trans. Microwave
Theory Tech., vol. MTT-32, No. 4, pp. 365-373,
April 1984.
[14] S. Şimşek, “Propagation properties of
inhomogeneously loaded metallic waveguides”,
MSc. Thesis., Istanbul Technical University,
2003.
[15] M. Sucher, J. Fox, “Handbook of
microwave measurements”, Vol. II., Polytechnic
Press of the Polytechnic Institute of Brooklyn,
1963.

Thank you for copying data from http://www.arastirmax.com