You are here

Home » Content

Joint Optimization of Economic Production Quantity and Preventive Maintenance with Considering Multi-Products and Reserve Time

Journal Name:

  • Journal of Industrial Engineering and Management

Publication Year:

  • 2017
DOI: 
doi.org/10.3926/jiem.2270

Key Words:

Author NameUniversity of Author
Abstract (2. Language): 
Purpose: We deal with the problem of the joint determination of optimal economic production quantity (EPQ) and optimal preventive maintenance (PM) for a system that can produce multiple products alternately. The objective is to find the optimal number of production cycles and the PM policy simultaneously by minimizing the cost model. Design/methodology/approach: Considering the products go through the system in a sequence and a complete run of all products forms a production cycle. In each cycle, beyond production time we also consider some reserve time for maintenance and setup, shortage and overproduction may occur. We study the integrated problem based on two PM policies, and explain the situation with the other PM policies. The delay – time concept is used to model PM decisions. Findings: Using the integrated EPQ and PM model, we can calculate the optimal production planning and PM schedule simultaneously, especially we consider multiple products in each production cycle, which is more practical and economic than previous works. Originality/value: In modern companies, the production planning and maintenance schedule share the same system, and traditional research about two activities is separated, that always generate conflicts, such as inadequate or excessive maintenance, and shortages, etc., so we develop the integrated EPQ and PM model to avoid these undesirable effects.
Bookmark/Search this post with
FULL TEXT (PDF): 
PDF icon arastirmax-joint-optimization-economic-production-quantity-and-preventive-maintenance-considering-multi-products-and-reserve-time.pdf
  • 3
431
443
  • English

REFERENCES

References: 

Baker, R., & Wang, W. (1993). Developing and testing the delay-time model. Journal of the Operational
Research Society, 44(4), 361-374. https://doi.org/10.1057/jors.1993.66
Bouslah, B., Gharbi, A., & Pellerin, R. (2016). Joint economic design of production, continuous sampling
inspection and preventive maintenance of a deteriorating production system. International Journal of
Production Economics, 173, 184-198. https://doi.org/10.1016/j.ijpe.2015.12.016
Chakraborty, T., Giriand, B.C., & Chaudhuri, K.S. (2008). Production lot sizing with process deterioration
and machine breakdown. European Journal of Operational Research, 185(2), 606-618.
https://doi.org/10.1016/j.ejor.2007.01.011
Chakraborty, T., Giriand, B.C., & Chaudhuri, K.S. (2009). Production lot sizing with process deterioration
and machine breakdown under inspection schedule. Omega, 37(2), 257-271.
https://doi.org/10.1016/j.omega.2006.12.001
Fitouhi, M.C., & Nourelfath, M. (2014). Integrating noncyclical preventive maintenance scheduling and
production planning for multi-state systems. Reliability Engineering and System Safety, 121(1), 175-186.
https://doi.org/10.1016/j.ress.2013.07.009
Fu, B., Wang, W., & Shi, X. (2012). A risk analysis based on a two-stage delayed diagnosis regression
model with application to chronic disease progression. European Journal of Operational Research, 218(3),
847-855. https://doi.org/10.1016/j.ejor.2011.12.013
Giri, B.C., & Dohi, T. (2004). Optimal lot sizing for an unreliable production system based on net
present value approach. International Journal of Production Economics, 92(2), 157-167.
https://doi.org/10.1016/j.ijpe.2003.10.011
Jafari, L., & Makis, V. (2015). Joint optimal lot sizing and preventive maintenance policy for a production
facility subject to condition monitoring. International Journal of Production Economics, 169(19), 156-168.
https://doi.org/10.1016/j.ijpe.2015.07.034Jafari, L., & Makis, V. (2016). Optimal lot-sizing and maintenance policy for a partially observable
production system. Computers & Industrial Engineering, 93, 88-98. https://doi.org/10.1016/j.cie.2015.12.009
Lee, S.D., & Rung, J.M. (2000). Production lot sizing in failure prone two-stage serial systems. European
Journal of Operational Research, 123(1), 42-60. https://doi.org/10.1016/S0377-2217(99)00089-2
Liu, X., Wang, W., & Peng, R. (2015a). An integrated production, inventory and preventive maintenance
model for a multi-product production system. Reliability Engineering and System Safety, 137(2), 76-86.
https://doi.org/10.1016/j.ress.2015.01.002
Liu, X., Wang, W., & Peng, R. (2015b). An Integrated Production and Delay-time based Preventive
Maintenance Planning Model for a Multi-product Production System. Eksploatacja i Niezawodnosc –
Maintenance and reliability, 17(2), 215-221. https://doi.org/10.17531/ein.2015.2.7
Sami, E.F. (2008). Economic production lot-sizing for an unreliable machine under imperfect age-based
maintenance policy. European Journal of Operational Research, 186(1), 150-163.
https://doi.org/10.1016/j.ejor.2007.01.035
Wang, W. (2012). An overview of the recent advances in delay-time-based maintenance modeling.
Reliability Engineering and System Safety, 106(5), 165-178. https://doi.org/10.1016/j.ress.2012.04.004
Wang, W., & Banjevic, D. (2012). Ergodicity of forward times of the renewal process in a block-based
inspection model using the delay-time concept. Reliability Engineering and System Safety, 100(2): 1-7.
https://doi.org/10.1016/j.ress.2011.12.011
Wang, W., Banjevic, D., & Pecht, M. (2010). A multi-component and multi-failure mode inspection model
based on the delay-time concept. Reliability Engineering and System Safety, 95(8), 912-920.
https://doi.org/10.1016/j.ress.2010.04.004
Wu, S., & Wang, W. (2011). Optimal inspection policy for three-state systems monitored by control charts.
Applied Mathematics and Computation, 217(23), 9810-9819. https://doi.org/10.1016/j.amc.2011.04.075

Thank you for copying data from http://www.arastirmax.com