[1] Mitani, A. and Barboutis, I., “Changes caused by heat treatment in colour and dimensional stability of beech (Fagus sylvatica L.) wood”, Drvna Ind., 65(3), 225-232, 2014.
[2] Bekhta, P., Proszyk, S. and Krystofiak, T., “Colour in short-term thermo-mechanically densified veneer of various wood species”, European Journal of Wood and Wood Products, 72(6), 785-797, 2014.
[3] Welzbacher, C. R., Wehsener, J., Rapp, A. O. and Haller, P., “Thermo-mechanical densification combined with thermal modification of Norway spruce (Picea abies Karst) in industrial scale - Dimensional stability and durability aspects”, Holz als Roh -und Werkstoff, 66(1), 39-49, 2008.
[4] Ünsal, Ö., Candan, Z., and Korkut, S., “Wettability and roughness characteristics of modified wood boards using a hot-press”, Industrial Crops and Products, 34(3), 1455-1457, 2011.
[5] İmirzi, H. Ö., Ülker, O., and Burdurlu, E., “Effect of densification temperature and some surfacing techniques on the surface roughness of densified Scots pine (Pinus sylvestris L.)”, BioResources, 9(1), 191-209, 2014.
[6] Bekhta, P., Proszyk, S., Krystofiak, T., Sedliacik, J., Novak, I., and Mamonova, M., “Effects of short-term thermomechanical densification on the structure and
0
10
20
30
40
50
60
Scots pine
Eastern beech
ΔE*
Untreated
190 ˚C
200 ˚C
210 ˚C
Hüseyin Pelit
Mugla Journal of Science and Technology, Vol 2, No 2, 2016, Pages 187-192
192
properties of wood veneers,” Wood Material Science and Engineering, available online, 2015.
[7] Pelit, H., Budakçı, M., Sönmez, A., and Burdurlu, E., “Surface roughness and brightness of scots pine (Pinus sylvestris) applied with water-based varnish after densification and heat treatment,” Journal of Wood Science, 61(6), 586-594, 2015.
[8] Fang, C. H., Cloutier, A., Blanchet, P., Koubaa, A., and Mariotti, N., “Densification of wood veneers combined with oil-heat treatment. Part 1: Dimensional stability,” BioResources, 6(1), 373-385, 2011.
[9] Cai, J., Yang, X., Cai, L., and Shi, S. Q., “Impact of the combination of densification and thermal modification on dimensional stability and hardness of poplar lumber,” Drying Technology, 31(10), 1107-1113, 2013.
[10] Pelit, H., Sönmez, A., and Budakçı, M., “Effects of ThermoWood® process combined with thermo-mechanical densification on some physical properties of Scots pine (Pinus sylvestris L.),” BioResources, 9(3), 4552-4567, 2014.
[11] Pelit, H., Budakçı, M., and Sönmez, A., “Effects of heat post-treatment on dimensional stability and water absorption behaviours of mechanically densified Uludağ fir and black poplar woods,” BioResources, 11(2), 3215-3229, 2016.
[12] Dubey, M. K., Pang, S., and Walker, J., “Effect of oil heating age on colour and dimensional stability of heat treated Pinus radiata”, European Journal of Wood and Wood Products, 69(2), 255-262, 2011.
[13] Hill Callum, A. S., “Wood modification, Chemical, Thermal and other Processes”, Wiley series renewable
Resources, School of agricultural and forest sciences, University of Wales, Bangor, 2006.
[14] Bekhta, P., and Niemz, P., “Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood,” Holzforschung, 57, 539-546, 2003.
[15] Yıldız, S., Gezer, E. D., and Yıdız, Ü. C., “Mechanical and chemical behavior of spruce wood modified by heat,” Building & Environment, 41(12), 1762-1766, 2006.
[16] Korkut, S., Kök, M. S., Korkut, D. S., and Gürleyen, T., “The effects of heat treatment on technological properties in red-bud maple (Acer trautvetteri Medw.) wood,” Bioresource Technology, 99(6), 1538-1543, 2008.
[17] Kocaefe, D., Poncsak, S., Boluk, Y., “Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen”, BioResources, 3(2): 517-537, 2008.
[18] Tuong, V. M., and Li, J., "Effect of heat treatment on the change in color and dimensional stability of acacia hybrid wood," BioResources, 5(2), 1257-1267, 2010.
[19] Huang, X., Kocaefe, D., Kocaefe, Y., Boluk, Y., and Pichette, A., “A spectrocolorimetric and chemical study on color modification of heat-treated wood during artificial weathering”, Appl Surf Sci., 258(14), 5360–5369, 2012.
[20] Kamperidou, V., Barboutis, I., Vasileiou, V., “Wood is good: With knowledge and technology to a competitive forestry and wood technology sector”, In: Proceedings of the 23rd International Scientific Conference, Zagreb, Croatia, 12th October 2012 Zagreb: Faculty of Forestry, University of Zagreb, 2012. pp 59-67.
[21] Toker, H., Baysal, E., Kotekli, M., Turkoglu, T. T., Kart, S., Sen, T. F., and Peker, T. H., “Surface characterıstıcs of orıental beech and scots pıne woods heat-treated above 200 °C”, Wood Research, 61(1), 43-54, 2016.
[22] Ayadi, N., Lejeune, F., Charrier, F., Charrier, B., and Merlin, A., “Color stability of heat-treated wood during artificial weathering”, Holz als Roh-und Werkstoff, 61(3), 221-226, 2003.
[23] Atik, C., Candan, Z., and Ünsal, Ö., “Colour characteristics of pine wood affected by thermal compressing”, Ciência Florestal, 23(2), 475-479, 2013.
[24] Sönmez, A. “Preparation and coloring, finishing on woodworking I,” Gazi University, Technical Education Faculty, Ankara, 2005.
[25] Budakçı, M., Sönmez, A., and Pelit, H., "The color changing effect of the moisture content of wood materials on water borne varnishes," BioResources, 7(4), 5448-5459, 2012.
[26] TS 2471 (1976). “Determination of moisture content for physical and mechanical tests in wood,” Turkish Standards Institute, Ankara, Turkey.
[27] Mononen, K., Alvila, L., and Pakkanen, T. T., “CIEL*a*b* measurements to determine the role of felling season, log storage and kiln drying on coloration of Silver birch wood”, Scand. J. Forest Res., 17: 179–191, 2002.
[28] González-Peña, M. M., and Hale, M. D., “Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 1: Colour evolution and colour changes”, Holzforschung, 63(4), 385-393, 2009.
[29] Oliver, J. R., Blakeney, A. B., and Allen, H. M., “Measurement of Flour Color in Color Space Parameters,” Cereal Chem, 69: 546-551, 1992.
[30] McGuire, R. G., “Reporting of Objective Color Measurements,” HortScience, 27: 1254-1255, 1992.
[31] ASTM D2244-15a (2015). “Standard practice for calculation of color tolerances and color differences from instrumentally measured color coordinates”, USA.
[32] Söğütlü, C., Sönmez, A., ‘‘Color changing effect of UV rays on some local wood species treated with various shielding agents,’’ Gazi University Journal of the Faulty of Architecture and Engineering, 21(1), 151-159, 2006.
[33] Militz, H., “Heat treatment of wood: European processes and their background,”In: International Research Group Wood Pre, Section 4-Processes, Nº IRG/WP 02-40241, 2002.
[34] Mitsui, K., Murata, A., Kohara, M., and Tsuchikawa, S. “Colour modification of wood by light-irradiation and heat treatment,”In: Abstracts of the First European Conference on Wood Modification, 2003, Belgium.
[35] Dubey, M. K., “Improvements in Stability, Durability and Mechanical Properties of Radiata Pine Wood after Heat-Treatment in a Vegetable Oil”, Ph.D. dissertation, University of Canterbury, Christchurch, New Zealand, 2010.
[36] Gündüz, G., Aydemir, D., and Korkut, S. “The effect of heat treatment on some mechanical properties and color changes of Uludağ fir wood,” Drying Technology, 28(2), 249-255, 2010.
[37] Aksoy, A., Deveci, M., Baysal, E., and Toker, H., “Colour and gloss changes of Scots pine after heat modification”, Wood Research, 56(3), 329-336, 2011.
[38] Akgül, M., Korkut, S., “The effect of heat treatment on some chemical properties and colour in Scots pine and Uludağ fir wood”, African Journal of Biotechnology, 7(21), 2854- 2859, 2012.
[39] Şahin, H. T., and Korkut S., “Surface colour changes of turkish hazelnut wood caused by heat treatment”, Journal of Advances in Biology & Biotechnology, 6(1), 2394-1081, 2016.
Thank you for copying data from http://www.arastirmax.com
