You are here

FARKLI OEE YAKLAŞIMLARININ MATBAA SEKTÖRÜNDE UYGULANABİLİRLİĞİNİN ANALİZİ

DIFFERENT OEE APPROACHES' ANALYSIS OF APPLICABILITY IN PRINTING SECTOR

Journal Name:

Publication Year:

DOI: 
10.5505/pausbed.2016.87587
Abstract (2. Language): 
Total Productive Maintenance is one of the application techniques, which is a widely accepted form of lean management system, at business and production management. OEE (Overall Equipment Effectiveness) technique is used in Total Productive Maintenance for assessing equipments' being used efficiently or not in any organizations and applications. In this study, testing the applicability of two different OEE approaches and comparing the obtained results in the daily newspaper printing having a unique working conditions are aimed. In the application part of the study, traditional OEE calculation method and OEE calculations with a new approach was made in a printing press which performs the publication of the largest circulation newspapers in Turkey. Datas were collected during six months and calculations were made with two mentioned methods for each day in which the datas were collected. The evaluation about the applicability of two OEE approaches in the printing sector was made according to the obtained results after the calculations being made.
Abstract (Original Language): 
Toplam verimli bakım, işletme ve üretim yönetiminde yalın yönetim sisteminin yaygın bir şekilde kabul görmüş olan uygulama tekniklerinden birisidir. Toplam Verimli Bakım uygulamalarında, bir organizasyonda ekipmanların etkin bir şekilde kullanılıp kullanılmadığının değerlendirilmesi için OEE (Overall Equipment Effectiveness) yöntemi kullanılır. Bu çalışmada kendine özgü çalışma şartlarına sahip olan günlük gazete basım matbaasında iki farklı OEE yaklaşımının uygulanabilirliğinin test edilmesi ve elde edilen sonuçların karşılaştırılması amaçlanmıştır. Çalışmanın uygulama bölümünde, Türkiye’deki en büyük tirajlı gazetelerin basımını gerçekleştiren bir matbaada geleneksel OEE hesaplama yöntemi ve yeni yaklaşımla OEE hesaplamaları yapılmıştır. Altı ay boyunca veri toplanmış ve söz konusu iki yöntemle veri toplanan her gün için hesaplamalar gerçekleşmiştir. Yapılan hesaplamalardan sonra elde edilen sonuçlara göre söz konusu iki OEE yaklaşımın sektörde uygulanabilirliğine ilişkin değerlendirme yapılmıştır..
264
271

REFERENCES

References: 

Andersson C. and Bellgran M. (2011). “Managing Production Performance with Overall Equipment Efficiency (OEE) - Implementation Issues and Common Pitfalls”, Proceeding of Conference on Manufacturing Systems, Madison (ABD), 31 May-3 June 2011.
FROST&SULLIVAN'S INDUSTRIAL AUTOMATION; (2005). “Improving Plant Performance: Overall Equipment Effectiveness”, (03.05.2015), http://www.schneiderelectric.co.uk/documents/solutions/processautomation...
Gibbons P. and Burrgess S. (2010). “Introducing OEE as a Measure of Lean Six Sigma Capability”, International Journal of Lean Six Sigma, 2, 134-156.
Hedge H. G., Maresh N. S. and Doss K. (2009). “Overall Equipment Effectiveness Improvement by TPM and 5S Techniques in a CNC Machine Shop”, SasTech Technical Journal, 8/2, 25-32.
Jeong K. Y. and Phillips D. T. (2001). “Operational Efficiency and Effectiveness Measurement”, İnternational Journal of Operations & Production Management, 21/11, 1404-1416.
Kumar S. J., Sujatha G. and Thyagarajan D. (2012). “Assesment of Overall Equipment Effectiveness, Efficiency and Energy Consumption of Breakfast Cereal”, İnternational Journal of Applied Engineering and Technology, 2/2, 39-48.
Ljungberg O. (1998). “Measurement of Overall Equipment Effectiveness as a Basis for TPM Activities”, International Journal of Operations and Production Management, 18/5, 495-507.
Maran M., Manikandan G. and Thiagarajan K. (2012). “Overall Equipment Effectiveness Measurement by Weighted Approach Method”, Proceeding of the International MultiConference of Engineers and Computer Scientists, Hong Kong. 14-16 Mart 2012.
Nachiappan R.M. and Anantharaman N. (2002). “Evaluation of Overall Line Effectiveness (OLE) in a Continuous Product Line Manufacturing System”, Journal of Manufacturing Technology Management, 17, 987-1008 .
Raja N. and Kannan S. M. (2007). “Evolutionary Programming to Improve Yield and Overall Equipment Effectiveness of Casting Industry”, Journal Of Engineering and Applied Sciences, 2/12, 1735-1742.
274
O. Özveri, M. Kabak, Ç.Keleş
Sarkar S. B.N. (2007). “Capability Enhancement of a Metal Casting Process in a Small Steel Foundry Through Six Sigma: A Case Study”, İnternational Journal of Six Sigma an Competitive Advantage, 3/1, 56-71.
Williamson R. M. (2006). “Using Overall Equipment Effectiveness: The Metric and the Measures”, (10.05.2015), http://www.swspitcrew.com/articles/OEE%200206.pdf
Wudhikarn R. (2010). “Overall Weighting Equipment Effectiveness”, Proceeding of International Conference on Industrial Engineering and Engineering Management, Singapur, 07-10 Aralık 2010.
Zandieh S., Tabatabaei S., Akbar N. and Ghandehary M. (2012). “Evaluation of Overall Equipment Effectiveness in a Continuous Process Production System of Condensate Stabilization Plant in Assalooyeh”, Interdisciplinary Journal of Contemporary Research in Business, 3/10, 590-598.

Thank you for copying data from http://www.arastirmax.com