You are here

Home » Content

Mathematical modeling of EDM hole drilling using response surface methodology

Journal Name:

  • Review Of Research

Publication Year:

  • 2012

Keywords (Original Language):

Author Name
Bookmark/Search this post with
Abstract (Original Language): 
This paper reports an experimental investigation of EDM drilling of Ø2 mm holes on Inconel 718 using brass electrode. The effect of process parameters (discharge current, pulse on and off times, and capacitance) on process outputs (material removal rate and electrode wear rate) was determined based on minimum number of experiments. The mathematical modeling of process has been done using response surface methodology. The results show that the developed model can achieve reliable prediction of experimental results within acceptable accuracy.
FULL TEXT (PDF): 
PDF icon arastirmax-mathematical-modeling-edm-hole-drilling-using-response-surface-methodology.pdf
  • 8
  • English

REFERENCES

References: 

[1] Kuppan, P., Rajadurai, A. and Narayanan, S. (2007) Influence of EDM process
parameters in deep hole drilling of Inconel 718. Int. J. of Advanced Manufacturing Technology,
Vol. 38, No. 1-2, pp. 74-84.
[2] Abbas, N.M., Solomon, D.G. and Bahari, M.F. (2007) A review on current research trends
in electrical discharge machining. Int. J. of Machine Tools & Manufacture, Vol. 47, pp. 1214-1228.
[3] Kanagarajan, D., Karthikeyan, R., Palanikumar, K. and Sivaraj, P. (2008) Influence of
process parameters on electric discharge machining of WC/30%Co composites. IMechE, Part B:
Engineering Manufacture, Vol. 222, pp. 807-815.
[4] Shabgard, M.R. and Shotorbani, R.M. (2009) Mathematical modeling of machining
parameters in EDM of FW4 welded steel. Proc. of World Academy of Science, Engineering and
Technology, ISSN: 2070-3740, pp. 403-409.
[5] Chiang, K.T. (2008) Modeling and analysis of effects of machining parameters on the
performance characteristics in the EDM process of Al2O3+TiC mixed ceramic. Int. J. of Advanced
Manufacturing Technology, Vol. 37, pp. 523-533.
[6] Habib, S.S. (2009) Study of the parameters in electrical discharge machining through
response surface methodology approach. Applied Mathematical Modeling, Vol. 33, pp. 4397-4407.
[7] Montgomery, D.C. (1997) Design and analysis of experiments. Wiley (New York), ISBN: 0-
471-15746-5.

Thank you for copying data from http://www.arastirmax.com