You are here

Home » Content

MAKROAZOBAŞLATICILAR İLE POLİ(ÜRETAN-b-AKRİLAT) BLOK KOPOLİMERLERİNİN SENTEZİ VE KARAKTERİZASYONU

SYNTHESIS AND CHARACTERIZATION OF POLY(URETHANE-bACRYLATE) BLOCK COPOLYMERS BY USING MACROAZOINITIATORS

Journal Name:

  • Sigma Mühendislik ve Fen Bilimleri Dergisi

Publication Year:

  • 2005

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
The block copolymers of poly(urethane-b-acrylate) (PUA)s were synthesized by the radical solution polymerization with polyurethane based macroazoinitiators (PUMAIs), and butyl methacrylate (n-BMA) or 2- hydroxyethyl methacrylate (HEMA). The PUMAI synthesis is carried out with using poly(ethylene glycol)s (PEG) having different number average molecular weights (M n = 400 and 1500 g/mol) as a soft segment and 2,4-toluene diisocyanate (TDI) or 1,6-hexamethylene diisocyanate (HMDI) as a hard segment. These macroazoinitiators vary in the molecular weight of soft-segment and type of hard-segment with all having constant amount of hard-segment. The number average molecular weights of PUMAIs were measured by the method of dibutylamine-back titration (ASTM D 2572) as a range of 2150-7700 g/mol. The number average molecular weights of PUA copolymers were determined by gel permeation chromatography (GPC). It was found that the number average molecular weights of PUA copolymers obtained with n-BMA were between 10100-14600 g/mol with a polydispersity of 1.78-2.12. The effects of the hard-segment type and the molecular weight of soft-segment on the properties of PUA copolymers were investigated. It was observed that the molecular weights of PUA copolymers increase with increasing the molecular weight of PEG used in PUMAI synthesis.
Bookmark/Search this post with
Abstract (Original Language): 
Poli(üretan-b-akrilat) (PUA) blok kopolimerleri, poliüretan esaslı makroazobaşlatıcılar (PUMAI) ile n-bütil metakrilat (n-BMA) veya 2-hidroksietil metakrilat’ın (HEMA) radikal çözelti polimerizasyonuyla sentezlendi. PUMAI sentezinde, yumuşak kısım (soft segment) olarak farklı molekül ağırlıklarında poli(etilen glikol) (PEG;Mn = 400 ve 1500 g/mol), sert kısım (hard segment) olarak 2,4-toluen diizosiyanat (TDI) veya 1,6- hekzametilen diizosiyanat (HMDI) kullanıldı. PUMAI’ler farklı yumuşak kısım uzunluğunda ve sabit miktarda farklı sert kısım türünde hazırlandı. PUMAI’lerin sayısal ortalama molekül ağırlıkları, dibütil amin geri titrasyon metodu (ASTM D 2572) ile 2150-7700 g/mol aralığında belirlendi. PUA kopolimerlerinin sayı ortalama molekül ağırlıkları, jel geçirgenlik kromatograf (GPC) ile tayin edildi. n-BMA ile hazırlanan PUA kopolimerlerinin sayısal molekül ağırlıkları, 10100-14600 g/mol ve molekül ağırlığı dağılımları 1.78-2.12 aralığında belirlendi. Sert kısım (TDI veya HMDI) türünün ve yumuşak kısım (PEG) molekül ağırlığının, PUA kopolimerlerinin özelliklerine etkisi incelendi. PEG molekül ağırlığının artması ile sentezlenen PUA kopolimerlerinin molekül ağırlıklarının yükseldiği belirlendi.
FULL TEXT (PDF): 
PDF icon arastrmx_845_23_pp_126-136.pdf
  • 3
126-136
  • Turkish

REFERENCES

References: 

[1] Cheikhalard,T., Massardier, V., Tighzert, L., Pascault, J. P., Block copolymers derived
from 2,2’-azobis(2-cyanopropanol). I. Synthesis of poly(urethane-b-methyl methacrylate)
and poly(urethane-b-styrene),J. Appl. Polym. Sci., 70, 613-627, 1998.
[2] Mishra, M. K., Macromolecular Design Concept and Practice, 1. Ed., Polymer Frontiers
International, Inc., New York, 1994, pg.230-342.
[3] Walz, R., Heitz, W., Preparation of (AB)n
-type block copolymers by use of polyazoesters,
J. Polym. Sci., Polym. Chem. Ed., 16, 1807-1814, 1978.
[4] Ueda, A., Nagai, S., Block copolymers derived from azobiscyanopentanoic acid. IV.
synthesis of a polyamide-polystyrene block copolymer, J. Polym. Sci., Polym. Chem. Ed.,
22, 1611-1621, 1984.
[5] Ueda, A., Nagai, S., Block copolymers derived from azobiscyanopentanoic acid (III)
synthesis of a copolyamide containing scissile azo linkages in its main chain, J. Polym.
Sci., Polym. Chem. Ed., 22, 1783-1791, 1984.
[6] Hazer, B., Erdem, B. ve Lenz, R. W., Styrene polymerization with some new macro or
macromonomeric azoinitiators having Peg units, J. Polym. Sci., Part A: Polym. Chem.,
32, 1739-1746, 1994.
[7] Matsukawa, K., Ueda, A., Inoue, H., Nagai, S., Direct polycondensation of 4,4′-azobis-4-
cyanopentanoic acid with diols and diamines using 1-methyl-2-chloropyridinium iodide,
J. Polym. Sci., Part A: Polym. Chem., 28, 2107-2114, 1990.
[8] Tunca, U., Yagci, Y., Synthesis, decomposition, and initiator properties of
macroazonitriles for the preparation of polymers with crown ether units, J. Polym. Sci.,
Polym. Chem. Ed., 28, 1721-1730, 1990.
[9] Ueda, A., Nagai, S., Block copolymers derived from azobiscyanopentanoic acid. IV.
synthesis of a polyethylene glycol-polystyrene block copolymer, J. Polym. Sci., Polym.
Chem. Ed., 24, 405-418, 1986.
[10] Walz, R., Bömer, B., Heitz, W., Monomeric and polymeric azoinitiators, Macromol.
Chem., 178, 2527-2537, 1977.
[11] Simionescu, C.I., David, G., Ioanid, A., Paraschiv, V., Reiss, G., Simionescu, B.C.,
Solution polymerization of vinyl monomers in the presence of poly(Nacetyliminoethylene) macroazoinitiators, J. Polym. Sci., Part A: Polym. Chem., 32, 3123-
3132, 1994.
[12] Qiu, X.Y., Ruland, W., Heitz, W., Synthesis and characterization of poly((styrene-cobutadiene)-block-(styrene-co-acrylonitrile)), Angew. Macromol. Chem., 125, 69-85,
1984.
[13] Takahashi, H., Ueda, A., Nagai, S., Synthesis of new macro-azo-initiators having two
kinds of azo linkages in repeating unit and block copolymerization by two-step radical
polymerization initiated with them, J. Polym. Sci., Part A: Polym. Chem., 35, 69-76,
1997.
[14] Morales, G., Castro, E., Kaluyzhnaya, E., Guerrero-Santos, R., Synthesis of graft
copolymers. Part I. Synthesis of macroinitiators, J. Appl. Polym. Sci., 57, 997-1004, 1995.
[15] Hamurcu, E. E., Hazer, B., Mısırlı, Z., Baysal, B. M., Preparation and characterization of
block and graft copolymers using macroazoinitiators having siloxane units, J. Appl.
Polym. Sci., 62, 1415-1426, 1996.
[16] Cheikhalard,T., Tighzert, L., Pascault, J. P., Polyurethane macroazoinitiators based on
2,2′-azobis(2-cyanopropanol) kinetic studies, J. Appl. Polym. Sci., 62, 2365-2375, 1996.
[17] Shimura, Y. ve Chen, D., Thermodegradable polyurethanes having azo groups in the main
chains. 1. Synthesis and thermal properties, Macromolecules, 26, 5004-5008, 1993.
[18] Kinoshita, H., Tanaka, N., Arakai, T. ve Ooka, M., Telechelic polystyrene obtained by
degradation of polyurethane-polystyrene block copolymers, Macromol., Chem. Phys.,
195, 413-425, 1994.
[19] Kinoshita, H., Tanaka, N., Araki, T., Preparation and characterization of polyurethanetype macroazo initiators for block copolymerization, Macromol. Chem., 194, 829-839,
1993.
[20] Kinoshita, H., Tanaka, N., Araki, T. ve Ooka, M., Preparation of poly(urethane/vinyl)
block copolymers initiated by polyurethane-type macroazo initiators, Macromol., Chem.,
194, 2335-2347, 1993.
[21] Dicke,H. R., Heitz, W., Synthesis and characterization of surface-active azogroupcontaining polyacrylamides, Macromol. Chem. Rapid Commun., 2, 83-91, 1981.
[22] Nagamune, T., Ueda, A., Nagai, S., Synthesis of (AB)n
-Type Block Copolymers
Employing Surface-Active Macro-Azo Initiators, J. Appl. Polym. Sci., 62, 359-365, 1996.
[23] Laverty, J. J. ve Gardlund, Z. G., Poly(vinyl chloride)-Poly(ethylene oxide) block
copolymers: Synthesis and characterization, J. Polym. Sci: Polym. Chem. Ed., 15, 2001-
2011, 1977.
[24] Yağcı, Y., ve Serhatlı, E., Synthesis of block copolymers by combination of an activated
monomer and free radical polymerization mechanism, Macromolecules, 26, 2397-2406,
1993.

Thank you for copying data from http://www.arastirmax.com