You are here

Home » Content

KILAVUZ KESİCİ TAKIMLARI İLE AISI 1050 ÇELİĞİNE VİDA AÇILMASINDA MATKAP DELİK ÇAPININ KESME KUVVETLERİ VE MOMENTE ETKİSİ

Effect of Drilled Hole Diameter on Cutting Forces and Torques for Thread Tapping on AISI 1050 Stell with Taps

Journal Name:

  • Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi

Publication Year:

  • 2010

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In this study; threads were tapped in drilled holes on AISI 1050 material with HSS machine taps coated and uncoated TIN. Holes were drilled by using HSS twist drills of which diameters are different from each other. Four different diameters were used for HSS twist drills. Threads were tapped in these holes by using taps of which forms are different from each other. Cutting forces and torques were measured in during thread tapping by using a dynamometer. An effect of hole diameter on cutting forces and torques was investigated. All of experimental was made on CNC Milling machines with cutting oil. The experimental results have shown that the hole diameters affect torques and cutting forces occurred during the tapping process.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışmada, AISI 1050 malzemesine açılan deliklere TIN kaplamalı ve kaplamasız HSS makine kılavuzları ile vidalar açılmıştır. Vidaların açılması işlemi, değişik çaplardaki matkaplarla delinen deliklere farklı formdaki kılavuzların uygulanması ile yapılmıştır. Deliklerin açılmasında, aralarında 0,1 mm çap farkı bulunan iki ağızlı HSS matkapları kullanılmıştır. Vidaların açılması sırasında meydana gelen kesme kuvvetleri ve moment bir dinamometre yardımı ile ölçülmüştür. Delik çaplarının kesme kuvvetlerine, momente etkisi araştırılmıştır. Deneyler, CNC freze tezgahında kesme sıvısı kullanılarak yapılmıştır. Yapılan çalışmanın sonucunda; matkap delik çapının kılavuz ile vida açma işlemi sırasında oluşan tork ve kesme kuvvetlerini etkilediği ortaya çıkmıştır.
FULL TEXT (PDF): 
PDF icon arastirmax-kilavuz-kesici-takimlari-ile-aisi-1050-celigine-vida-acilmasinda-matkap-delik-capinin-kesme-kuvvetleri-momente-etkisi.pdf
  • 1
99-111
  • Turkish

REFERENCES

References: 

1. Avuncan, G. (2005) Talaş kaldırma ekonomisi ve kesici takımlar, Ankara.
2. Blau (2005) Kesici takım katalogu, Almanya.
3. Cao, T. and Sutherland, J.W. (2002) Investigation of thread tapping load characteristics through mechanistics
modeling and experimentation, International Journal of Machine Tools and Manufacture, 42 (14), 1527-
1538.
4. Çakır, M. ve Işık, Y. (2005) Detecting tool breakage in turning AISI 1050 steel using coated and un coated
cutting tools, Journal of material processing technology, 191-198.
5. Doyle, E.D. and Dean, S.K. (1974) Effect of axial forces on dimensional accuracy during tapping, International
Journal of Machine Tool Design and Research, 14(4), 325-333.
6. Jin, M., Watanabe, S., Miyake, S. and Murakawa M. (2000) Surface and coating technology, 133, 443-447.
7. Kibbe, R.R., Neely J.E., Meyer, R.O. and White, W.T. (2002) Machine Tool Practices, New Jersey.
8. Kuo, K. (2007) Experimental investigation of ultrasonic vibration-assisted tapping, Journal of material
processing technology, 345-352.
9. Reiter, A.E., Brunner, B., Ante M. and J. Rechberger (2006) Investigation of several PVD coatings for blind
hole tapping in austenitic stainless steel, Surface and coating technology, 200, 5532-5541.
10. Veldhuis, S.C., Dosbaeva, G.K. and Benga, G. (2006) Application of ultra-thin fluorine-content lubricating
films to reduce tool/workpiece adhesive interaction during thread-cutting operations, International Journal of
Machine Tools and Manufacture, 245, 58-65.
11. Zhang, B., Yang Y. and Wang, J. (2002) Fundemental aspects in vibration-assisted tapping, Journal of
material processing technology, 345-352.

Thank you for copying data from http://www.arastirmax.com