The Analysis Of The Effect Of The Surface Processing Methods On The Fatigue Behaviour Of Cold Working Tool Steel
Journal Name:
- Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Key Words:
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
In this study, the fatigue behaviors of the cylindrical specimens manufactured by EN 90MnCrV8 (1.2842) cold work tool steel with different surface operation methods were compared. The methods used in manufacturing are machining and modern manufacturing methods consist of electrical discharge machining (EDM), chemical etching and sandblasting methods. The fatigue test conducted on the specimens was rotating bar bending fatigue test. The experimental findings indicate that fatigue behavior of 1.2842 is strongly affected by surface processing method. According to the results it was seen that the EDM procedure performed after machining was decreased fatigue life, the fatigue life of the specimens was notably increased in sandblasting method, and the lifetime was decreased in specimens produced by chemical etching.
Bookmark/Search this post with
Abstract (Original Language):
Bu çalışmada, EN 90MnCrV8 (1.2842) soğuk iş takım çeliğinden üretilmiş silindirik numunelerin farklı yüzey işleme yöntemleriyle üretimi sonucunda yorulma davranışları karşılaştırılmıştır. Kullanılan yöntemler arasında talaşlı imalatın yanı sıra modern imalat yöntemlerinden elektrik deşarj metodu (EDM), kimyasal aşın-dırma ve kumlama gibi farklı yüzey işleme yöntemleri bulunmaktadır. Üretilen numunelerin yorulma testleri dönen eğilmeli ankastre kiriş türü yorulma cihazında gerçekleştirilmiştir. Deneysel sonuçlar 1.2842 çeliğinin yorulma ömrünün yüzey işleme yöntemine bağlı olarak büyük oranda değiştiğini göstermiştir. Buna göre torna-lamadan sonra yapılan EDM işleminin parçanın yorulma ömrünü azalttığı, uygulanan kumlama işlemi ile bera-ber yorulma ömrünün arttığı, kimyasal işlemede ise yorulma ömrünün azaldığı görülmüştür.
FULL TEXT (PDF):
- 1
19-28