Effects of Different S0/X0 Rates on Soluble Inert Product Formation
Journal Name:
- Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
Organic substances that causing water pollution are biologically reduced, stabilized by microorganisms and
become harmless for environment. Organics are converted into inorganic food elements, as a result of biological
activities. While microorganisms decomposing organic substances, and synthesizing new cells they produce new
products that can not be completely decomposed (inert). Activated Sludge System (ASS) is a process whose aim is to
remove organic matters in aerobic conditions.The most important parameter affecting on system performance and
activity is the ratio between (S0) initial substrate concentration and (X0) initial microorganism concentration, that is
S0/X0 .
The aim of this study is to investigate soluble inert product (SR) formation in the ASS with the aim of experimental
studies depending on different S0/X0 ratios of initial substrate and biomass concentrations. Batch reactors was thought
as the best way for experimental studies. Experimental studies were carried out in twenty five reactors consisting of a
set of five reactors fed with glucose; each containing 100;200;300;400 and 500 mg/L S0 concentrations respectively
for each of 100;200;300;400 and 500 mg/L X0 concentrations. Experimentation matrix of organic loadings was
formed from those reactors. After glucose was completely used up, daily Chemical Oxygen Demand (COD) analyses
were continued for about 10 days in order to trace the course of soluble inert product. The results of SR values, from
each reactors, together with the S0/X0 ratio were given in graphics.
Bookmark/Search this post with
Abstract (Original Language):
Su kirlenmesine sebep olan organik maddeler mikroorganizmalar tarafından biyolojik olarak indirgenerek
stabil ve zararsız hale getirilmektedir. Biyolojik faaliyetler sonucu organik maddeler inorganik besin elementlerine
dönüşür. Mikroorganizmalar bir taraftan organik maddeleri biyolojik olarak ayrıştırırken, bir taraftan da ortamda
ayrıştırılamayan (inert) yeni ürünler oluşturur. Aktif Çamur Sistemi (AÇS) oksijenli ortamda organik maddelerin
giderimini amaçlayan bir proses olup, bu sistemlerin tasarımında gözönüne alınması gereken pekçok parametre bulunmaktadır.
Bunlardan en önemlisi başlangıç substrat konsantrasyonu (S0) ile başlangıç mikroorganizma konsantrasyonu
(X0) arasındaki S0/X0 oranıdır.
Bu çalışmanın amacı, AÇS’nde farklı S0/X0 oranlarında çözünmüş kalıcı ürün (SR) oluşumunun deneysel çalışmalar
yardımıyla incelenmesidir. Deneysel çalışmalar için kesikli (batch) reaktörlerin kullanılması uygun bulunmuştur.
Deneylerde glukozun 100;200;300;400 ve 500 mg/L’lik başlangıç konsantrasyonları ile yüklenen 100;200;300;400 ve
500 mg/L’lik başlangıç mikroorganizma konsantrasyonları için farklı S0/X0 oranlarında 25 bileşenli bir reaktörler
matrisi oluşturulmuştur. Yirmi beş adet S0/X0 oranı ile beslenen yirmi beş reaktörde glukozun tamamının ayrışmasından
sonra 10 gün boyunca ölçülen Kimyasal Oksijen İhtiyacı (KOI) değerlerinin analiz sonuçları kalıcı ürün olarak
değerlendirilmiş ve bu değerlerin zamana göre değişimleri izlenmiş ve oluşturulan grafikler üzerinde değişimlerin
irdelenmesi gerçekleştirilmiştir.
FULL TEXT (PDF):
- 1
31-37