DETERMINATION OF SHEAR BOND STRENGTH OF FULL-CERAMIC RESTORATIONS ON FLUOROSED ENAMEL
Journal Name:
- Süleyman Demirel Üniversitesi Diş Hekimliği Fakültesi Dergisi
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
Introduction: Dental fluorosis often causes esthetical problems
and mainly affects the enamel. Restoring of fluorosed teeth may be
necessary owing to esthetical and/or functional reasons. Therefore,
ceramic restorations can be used.
Objectives: The aim of this study was to determine the shear
bond strength of all-ceramic restorations to mild and middle fluorosed
enamel.
Material and Method: Teeth were classified as "TFI=0 (control),
TFI=1-3 and TFI=4-6 groups" according to Thylstrup-Fejerskov Index
(TFI). Enamel surfaces were flattened in 0.5 mm depth by "Microcut-
Precision Cutter/Metkon,Turkey" and etched with "Etchinggel/
3M,USA"(35%,20s).
IPS-Empress ceramic discs (Ivoclar/Vivadent,Liechtenstein)
(3mmx3mm, n=10, totaling 30) were bonded to the teeth using a totaletch
bonding system (Single Bond/3M,USA) and a composite luting
cement (Opal Luting/3M,USA).
Teeth were immersed in distilled water (at room temperature,
24h), thermocycled (+50C/+550C,x500), tested with "Universal-
Testing-Machine" (Lloyd-LRX Universal/Fareham,England)
(crosshead speed:1 mm/minute). Bond failures were examined under
stereomicroscope (2.5x10). Data were examined with One-Way-
ANOVA and LSD Test statistically p<0,05).
Results: The values were decreased due to increase of levels of
fluorosis. Statistical differences were present between "TFI 0 and TFI
4-6" and "TFI 1-3 and TFI 4-6" (p<0,05). It was not found between
"TFI 0 and TFI 1-3" (p>0,05). The type of bond failure was mostly
"adhesive" between intersurfaces of tooth/restoration. "Cohesive"
failures were not found in ceramic discs.
Conclusions: Shear bond strength has shown a decreasing due to
the severity of fluorosis. Bond failure was commonly adhesive. Allceramic
restorations may safely be used for fluorosed enamel in TFI
1-3, but they may cause bonding problems in TFI 4-6
Bookmark/Search this post with
Abstract (Original Language):
Giriş: Dental fluorozis sıklıkla dişlerde estetik problemlere yol
açmakta ve esas olarak mineyi etkilemektedir. Estetik ve/veya
fonksiyonel nedenlerle florozisli dişlerin restorasyonları gerekebilir ve
bu amaçla seramik restorasyonlar kullanılabilir.
Amaç: Bu çalışmanın amacı; hafif ve orta şiddetteki florozisli
daimi dişlerin minesinde, tam-seramik restorasyonların makaslama
bağlanma dirençlerinin değerlendirilmesidir.
Gereç ve Yöntem: Dişler, Thylstrup-Fejerskov Indeksi'ne (TFI)
göre; TFI=0 (kontrol), TFI=1-3 ve TFI=4-6 gruplarına ayrıldı. Mine
yüzeyleri, kesme cihazıyla (Microcut-Precision
Cutter/Metkon,Türkiye) 0,5mm düzleştirildi ve %35'lik fosforik asitle
(Etching-gel/3M,USA) 20sn dağlandı. IPS-Empress seramik diskleri
(Ivoclar/Vivadent,Liechtenstein) (3mmx3mm, n=10, toplam=30
örnek), bir total-etch bonding sistem (Single Bond/3M,USA) ve bir
kompozit yapıştırma simanı (Opal Luting/3M,USA) kullanılarak mine
yüzeylerine yapıştırıldı. Dişler, oda sıcaklığında 24 saat, distile suda
bekletildi. +5 C/+550C 'de 500 kez termosiklus uygulandı ve
lmm/dk'lık başlık hızına sahip bir "Universal Test Cihazı" (Lloyd-
LRX Universal/ Fareham, England) ile makaslama bağlanma direnci
testine tabi tutuldu. Bağlanma başarısızlığı açısından, mine yüzeyleri
stereomikroskopla incelendi (2.5x10).Verilerin istatistiksel
değerlendirilmesinde Tek-Yönlü-ANOVA ve LSD Testi kullanıldı
(p<0.05).
Bulgular: Florozisli minede tam-seramik restorasyonların
makaslama bağlanma direnci değerleri, florozis seviyesindeki artışa
bağlı olarak azalma gösterdi. "TFI 0 ve TFI 4-6" ve "TFI 1-3 ve TFI
4-6" grupları arasında istatistiksel farklılıklar bulundu (p<0,05), "TFI
0 ve TFI 1-3" grupları arasında istatistiksel farklılık bulunmadı
(p>0,05). Diş/restorasyon ara yüzeyleri arasında bağlanma
başarısızlığı daha çok adeziv tipte gözlendi. Seramik diskler içinde
koheziv tip kırığa rastlanmadı.
Sonuç: Makaslama bağlanma direnci florozisin şiddetine bağlı
olarak azalma gösterdi. Bağlanma başarısızlığı daha çok adeziv tip
olarak izlendi. Florozisli minede tam-seramik restorasyonların, TFI 1¬
3 seviyesindeki dişlerde kullanılabileceği, ancak TFI 4-6
seviyesindeki dişlerde bağlanma problemleri gözlenebileceği
sonucuna varıldı.
FULL TEXT (PDF):
- 1
23-34