Buradasınız

Anasayfa » Content

YÜZ PROTEZİ YAPIMINDA BİLGİSAYAR DESTEKLİ TEKNOLOJİLERİN KULLANIMI

THE USE OF THE COMPUTER ASSISTED TECHNOLOGIES IN FACIAL PROSTHESES' PRODUCTION

Journal Name:

  • İstanbul Üniversitesi Diş Hekimliği Fakültesi Dergisi

Publication Year:

  • 2006

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
İt is not always possible to surgically replace the tissues of the congenital or required facial defects. In those situations, which affect the patient's sociopsychologic situations, prosthetic treatment is necessary. The conventional prosthesis producing techniques have many handicaps for patients, clinicians and technicians. Acquiring the data of the patient's face using three dimensional scanning techniques provides to shorten this process. The computed tomography (CT), magnetic resonance imaging (MR1). laser surface scanners and optical modeling systems are currently used. Prototyping of the facial prosthesis is made by rapid prototyping (RP) technique. Stereolithography is one of the RP techniques. This article investigates the computer assisted design of facial prostheses.
Bookmark/Search this post with
Abstract (Original Language): 
Doğumsal veya kazanılmış yüz defektleri bulunan hastaların bu defektlerinin cerrahi yolla tamamen kapatılması her zaman mümkün olmamaktadır. Hastaların sosyo-psikolojik durumlarını önemli ölçüde etkileyen bu durumlarda dcfckllerin protetik olarak kapatılması gerekmektedir. Protezlerin hazırlanmasında kullanılan geleneksel yöntemler hasta, hekim ve teknisyen açısından türlü zorluklar taşımakta ve uzun zaman gerektirmektedir. Hastaya ait ölçümlerin çeşitli üç boyutlu görüntüleme yöntemleri kullanılarak yapılması ve bunların bilgisayara aktarılmasıyla üç boyutlu modellerinin elde edilmesi bu zorlu süreci oldukça kısaltmakladır. Günümüzde bu amaçla bilgisayarlı tomografi(BT) ve manyetik rezonans (MR) görüntüleme yöntemlerinin yanı sıra lazer yüzey tarayıcılar ve optik modclleme yöntemleri de başarıyla kullanılmaktadır. Elde edilen verilerden üç boyutlu modellerin oluşturulması işleminde hızlı prololipleme (RP) yöntemi kullanılmaktadır. Stereolithografi (SL), RP tekniklerinden biri ve en yaygın olarak kullanılanıdır. Bu makalede yüz protezlerinin üretilmesinde bilgisayar destekli sistemlerin kullanım alanları incelenmiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-yuz-protezi-yapiminda-bilgisayar-destekli-teknolojilerin-kullanimi.pdf
  • 1-2
17
22
  • Turkish

REFERENCES

References: 

1. Beumer J, Curtis TA, Marunick MT. Maxillofacial rehabilitation. Prosthodontic and surgery considerations. St Louis:Ishiyaku EuroAmerica, 1996: 467-75
2. Cheah C, Chua C, Tan K, Teo C. Integration of laser surface digitizing with CAD/CAM techniques for developing facial prostheses. Part LDesign and fabrication of prosthesis replicas. Int J Prosthodont, 2003: 16: 435-41
3. Mathews MF, Smith RM, Sutton AJ, Hudson R. The ocular impression: A review of the literature and presentation of an alternate technique. J Prosthodont, 2000: 9: 210-6
4. Coward T.I, Watson RW. Wilkinson IC. Fabrication of a wax ear by rapid-process model ig using stereolithography. Int J Prosthodont, 1999: 112: 20-7
5. Ciocca L, Scotti R. CAD-CAM generated ear cast by means of a laser scanner and RP machine. J Prosthet Dent, 2004: 92: 591-5
6. AlMardini M, Ercoli C, Graser GN. A technique to produce a mirror image wax pattern of an ear using rapid prototyping technology. J Prosthet Dent, 2005: 94:195-8.
7. Jiao T, Zhang F. Huang X. Wang C. Design and fabrication of auricular prostheses by
Yüz Protezi Yapımında Bilgisayar Destekli Teknolojilerin Kullanımı
21
CAD/CAM
system
. Int J Prosthodont. 2004: 17: 460-3
8. Cheah C, Chua C, Tan K. Integration of Laser surface digitizing with CAD/CAM techniques for developing facial prostheses. Part 2:Devclopment of molding techniques for casting prosthetic parts. Int J Prosthodont, 2003: 16 :543-8
9. Reitcmeier B, Notni G, Heinze M, Schone C, Schmidt A, Fichtner D. Optical modeling of extraoral defects. J Prosthet Dent, 2004: 91: 80-4
10. Runte C, Dirksen D, Delere H, Runte B, Meyer U, Bally G, Bollmann F. Optical data acquisition for computer-assisted design of facial prostheses. Int J Prosthodont, 2002: 15: 129-32
11. Mankovich NJ, Curtis DA, Kagawa T, Beumer J. Comparison of computer-based fabrication of alloplastic cranial implants with conventional techiques. J Prosthet Dent, 1986: 55: 606-9
12. Joffe J, Harris M, Kahugu F, Nicoll S, Linney A, Richards R. A prospective study of computer-aided design and manufacture of titanium plate for cranioplasty and its clinical outcome. Br J Neurosurg, 1999: 13: 576-80
13. Burghart CR, Neukirch K, Hassfeld S, Rembold U, Woern H. Computer aided planning device for preoperative bending of osteosynthesis plates. Stud Health Technol Inform. 2000: 70: 46-52
14. Eppley BL. Craniofacial reconstruction with computer-generated HTR patient-matched implants: use in primary bony tumor excision. J Craniofac Surg, 2002: 13: 650-7
15. Heissler E, Fischer FS. Bolouri S, Lehmann T, Mathar W, Gebhardt A, Lanksch W, Bier J. Custom-made cast titanium implants produced with CAD/CAM for the reconstruction of cranium defects. Int J Oral Maxillofac Surg, 1998: 27: 334-8
16. Rohner D, Hutmacher DW, See P, Tan KC, Yeow V, Tan SY, Lee ST, Hammer B. Individually CAD-CAM technique designed, bioresorbable 3-dimcnsional polycaprolactone framework for experimental reconstruction of
craniofacial defects in the pig. Mund Kiefer Gesichtschir, 2000: 6: 162-7
17. Mommaerts MY, Jans G. Vander Sloten J, Staels PF, Van der Perre G. Gobin R. On the assets of CAD planning for craniosynostosis surgery. J Craniofac Surg, 2001: 12: 547-54
18. Cheung LK, Wong MC, Wong LL. Refinement of facial reconstructive surgery by stereo-model planning. Ann R Australas Coll Dent Surg, 2002: 16: 129-32
19. Mankovich NJ, Samson D, Pratt W, Lew D, Beumer J 3rd. Surgical planning using three-dimensional imaging and computer modeling. Otolaryngol Clin North Am, 1994: 27: 875-89
20. Muller A, Krishnan KG, Uhl E, Mast G. The application of rapid prototyping techniques in cranial reconstruction and preoperative planning in neurosurgery. J Craniofac Surg, 2003: 14: 899-914
21. WinderJ, Richard B. Medical Rapid Prototyping Technologies: State of the Art and Current Limitations for Application in Oral and Maxillofacial Surgery. J Oral Maxillofac Surg, 2005: 63: 1006-15
22. Hughes CW, Bibb R, Taylor J, Revington P. The custom-made titanium orbital floor prosthesis in reconstruction for orbital floor fractures. Br J Oral Maxillofac Surg, 2003: 41: 50-3
23. Harris J, Rimeli J. Can rapid prototyping ever become a routine feature in general dental practice? Dent Update, 2002: 29: 482-6
24. Penkner K, Santler G, Mayer W. PiererG, Lorenzoni M. Fabricating auricular prostheses using three-dimensional soft tissue models. J Prosthet Dent, 1999: 82: 482-4
25. Bibb R, Brown R. The application of computer aided product development techniques in medical modelling topic: rehabilitation and prostheses. Biomed Sci Instrum, 2000: 36: 319-24
26. Jiao T, Ye M, Zhang FQ, Wang CT. The basic research on fabricating an ear model by means of rapid prototyping (FDM) Shanghai Kou QiangYiXue, 2002: 11:319-21
27. Bibb R,Freeman P, Sugar A, Evans P, Bocca A. An investigation of three dimensional
22
Gülümser EVLİOĞLU, Evrim GÖRE
scanning of human body surfaces and its use in the design and manufacture of prostheses. Proc Inst Mech Eng. 2000: 214: 589-94
28. Hammond P, Hutton T, Maheswaran S, Modgil S. Computational models of oral and craniofacial development, growth, and repair. Adv Dent Res, 2003: 17: 61-4
29. Sykes LM, Parrott AM, Owen CP, Snaddon DR. Applications of rapid prototyping technology in maxillofacial prosthetics. Int J Prosthodont, 2004: 17: 454-9
30. Williams RJ, Bibb R. Rafik T. A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying. J Prosthet Dent. 2004: 91: 85-8
31. Powers DB, Edgin WA, Tabatchnick L. Stereolithography: a historical review and indications for use in the management of trauma. J Craniomaxillofac Trauma, 1998: 4: 16-23

Thank you for copying data from http://www.arastirmax.com