COMPUTER BASED CONTROL OF IGNITION TIMING IN A SINGLE CYLINDER
SPARK IGNITION ENGINE
Journal Name:
- Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
The electronic systems which are used in today’s engines are in a very complex structure. In order to understand
and comprehend these structures, each system must be examined in sections. In this study, an ignition control
system was designed for an original spark ignition engine. The system is controlled by a microcontroller. There
is a computer which is connected to the microcontroller card in the system. Speed and load of the engine are
controlled by the system continuously. According to load and speed, the optimum ignition advance value is
calculated by using the ignition advance map in the computer software and then the result is sent to the
microcontroller again. The microcontroller card sends the trigger signal to the circuit according to the incoming
ignition advance value and so ignition is provided at the required moment. This new designed control system is
capable of changing the ignition advance map. Hence, the system gives an opportunity of changing the ignition
parameters if it is desired. It is also possible to monitor the ignition system parameters with this system so that it
can be used for educational purposes.
Bookmark/Search this post with
Abstract (Original Language):
Günümüz motorlarında kullanılan elektronik sistemler oldukça karmaşık bir yapıya sahiptir. Bu sistemlerin
yapılarını ve çalışma mantıklarını anlayabilmek için her bir sistemi ayrı ayrı incelemek gerekmektedir. Bu
çalışmada özgün bir buji ile ateşlemeli motor için ateşleme kontrol sistemi tasarlanmıştır. Sistem bir
mikrodenetleyici tarafından kontrol edilmektedir. Sistemde mikrodenetleyici kartına bağlı bir bilgisayar
bulunmaktadır. Motor devri ve yükü sistem tarafından sürekli olarak kontrol edilmektedir. Yük ve hıza bağlı
olarak en uygun ateşleme avansı bilgisayar yazılımındaki avans haritası yardımıyla hesaplanmakta ve sonuçlar
mikrodenetleyiciye gönderilmektedir. Mikrodenetleyici kartı bilgisayardan aldığı avans değerine göre
ateşlemenin uygun zamanda yapılabilmesi için tetikleme sinyalini üretmektedir. Geliştirilen bu sistem ateşleme
avansını değiştirebilme yeteneğine sahiptir. Bu nedenle sistem ateşleme parametrelerinin istenildiği gibi
değiştirilebilmesine imkân vermektedir. Ayrıca sistem ateşleme sistemi parametrelerinin görüntülemesi
sayesinde bir eğitim aracı olarak da kullanılabilmektedir.
FULL TEXT (PDF):
- 4