You are here

IEEE 802.11 kablosuz LAN kullanarak PROFIBUS segmentlerin genişletilmesi

Extending PROFIBUS segments through IEEE 802.11 wireless LAN

Journal Name:

Publication Year:

DOI: 
https://dx.doi.org/10.5505/pajes.2016.15579

Keywords (Original Language):

Abstract (2. Language): 
PROFIBUS is defined with international standards is a fieldbus standard with widespread usage in industrial process control applications. PROFIBUS as other Fieldbus systems has two main requirements such as extending independent PROFIBUS segments and communicating with other LANs. To overcome these requirements the best solution is to utilize wireless network technologies due to advantages such as high data rates, cost and mobility etc. In this research work, the designed PROFIBUS/IEEE 802.11g WLAN Wireless Interworking Unit (WIU) is presented to extend PROFIBUS segment through IEEE 802.11 g WLAN. Modeling and computer simulation of the designed WIU are performed using discrete-event simulation technique. Performance evaluation of the Wireless Interworking Unit is carried out according to utilization of PROFIBUS segments, end-to-end message delay of independent PROFIBUS segments (remote) messages and WIU process time parameters.
Abstract (Original Language): 
PROFIBUS uluslararası standartlar ile tanımlanmış endüstriyel süreç kontrol uygulamalarında yaygın kullanıma sahip bir saha veri yoludur. Diğer saha veri yolu sistemleri gibi PROFIBUS sistemlerin de bağımsız saha veri yolu segmentlerini genişletmek ve diğer ağlar ile haberleşmek olmak üzere iki temel gereksinimi vardır. Bu gereksinimleri karşılamak için en iyi çözüm yüksek veri iletim hızları, maliyet ve hareketlilik gibi avantajları ile kablosuz ağ teknolojilerinden yararlanmaktır. Bu araştırma çalışmasında PROFIBUS segmentleri IEEE 802.11g WLAN aracılığıyla genişletmek için tasarlanan PROFIBUS/IEEE 802.11g WLAN Kablosuz Arabağlaşım Birimi (KAB) sunulmaktadır. Tasarlanan PROFIBUS/IEEE 802.11g WLAN KAB'ın modellemesi ve bilgisayarlı benzetimi ayrık olay simülasyon tekniği ile gerçekleştirilmiştir. Kablosuz Arabağlaşım Biriminin başarım analizi, PROFIBUS saha veri yolunun kullanım oranı, bağımsız PROFIBUS segmentlerin (uzak) mesajlarının uçtan-uca gecikme ve KAB'ın işlem zamanı parametrelerine göre gerçekleştirilmiştir.
573
580

REFERENCES

References: 

[1]
7
Kaynaklar
"Fieldbus
technolog
y
Thomesse JP. in industrial automation". Proceedings of the IEEE, 93(6), 1073-1101,
2005.
Ozcelik I, Ekiz H. "Design, implementation and performance analysis of the PROFIBUS/ATM Local Bridge". Computer Standards & Interface, 26(4), 329-342,
2004.
Bayilmis C, Erturk I, Ceken C, Ozcelik I. "A CAN/IEEE 802.11b wireless lan local bridge design". Computer Standards & Interface, 30(3), 200-212, 2008. Cavalieri S, Pano D. "A novel solution to interconnect FieldBus systems using IEEE wireless LAN technology". Computer Standards & Interface, 20(1), 9-23, 1998. Erturk I. "A new method for transferring CAN messages using wireless ATM". Journal of Network and Computer Applications, 28(3), 45-56, 2005.
Ozcelik I. "Interconnection of CAN segments through IEEE 802.16 wireless MAN". Journal of Network and Computer Applications, 31 (4), 879-890, 2008. Koulamas C, Koubias G, Papadopulos G. "Using cut-through forwarding to retain the real-time properties of profibus over hybrid wired/wireless architectures". IEEE Transactions on Industrial Electronics, 51(6), 1208-1217,
2004.
Alves F. Real-Time Communications Over Hybrid
Wired/Wireless PROFIBUS-Based Networks. Phd Thesis,
Porto University, Porto, Portogual, 2003. Sousa PB, Ferreira LL. "Hybrid Wired/Wireless PROFIBUS architectures: Performance study based on simulation models". EURASIP Journal on Wireless Communications and Networking, 2010 (1), 1-25, 2010. Kjellsson J, Vallestad AE, Steigmann R, Dzung D. "Integration of a wireless I/O interface for PROFIBUS and PROFINET for factory automation". IEEE Transaction on Industrial Electronics, 56(10), 4279-4287, 2009.
Zhong L, Liu S, Zhang X, Liang W, Zhou Y.
"Interconnection technique between wireless factory
automation network and PROFIBUS-DP". 11th World
Congress on Intelligent Control and Automation,
Shenyang, China, 29 June - 4 July 2014. [12] Pellegrini F, Miorandi D, Vitturi S, Zanella A. "On the use
of wireless networks at low level of factory automation
systems". IEEE Transactions on Industrial Informatics,
2 (2), 129-143, 2006. [13] Willig A, Matheus K., Wolisz A. "Wireless technology in
industrial networks". Proceedings of the IEEE, 93(6),
1130-1151, 2005.
International Electrotechnical Commission. "PROFIBUS Specification". Switzerland, IEC 61158, 2000.
PROFIBUS Nutzerorganisation."PROFIBUS Brochure:
PROFIBUS Technology and Application". Karlsruhe,
Germany, 4.002, 2002.
[16] Vassis D, Kormentzas A, Rouskas A, Maglogiannis I.
"The IEEE 802.11g standard for high data rate WLANs".
IEEE Network, 19(3), 21-26, 2005.
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[14]
[15]
579
Pamukkale Univ Muh Bilim Derg, 23(5), 573-580,2017
C. Bayılmış, İ. Özçelik
[17] Vitturi S, Seno F, Tramarin F, Bertocco M. "On the rate adaptation techniques of IEEE 802.11 networks for industrial applications". IEEE Transactions on Industrial
Informatics, 9(1), 198-208, 2013.
[18] The Institute of Electrical and Electronics Engineers. "IEEE Standards 802.11: Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications". USA, ANSI/IEEE Std 802.11, 2006.
[19] OPNET. "OPNET (Riverbed) Modeler Software".
http://www.riverbed.com/products/steelcentral/steelce ntral-riverbed-modeler.html (01.02.2016).
[20] SIEMENS. "Siemens Catalog: SIMATIC components for
totally integrated automation". Germany, ST-70, 2005.

Thank you for copying data from http://www.arastirmax.com