Determination of Optimum Welding Parameters of Iron-Based Powder Metal Parts in the Resistance Welding
Journal Name:
- Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
Nowadays, it was needed to join the powder metal parts which were manufactured by pressing the metal
powders. In this study, 4x12x70 mm3 dimensions powder metal parts are produced by using iron based powder metal
material obtained by powder metal techniques. Powder metal parts sintered welded by certain conditions of resistance
welding are welded. Mechanical, physical properties and microstructure of welding joint are examined comparatively.
Experimental results showed that weldability of iron based powder metal parts which is welded by resistance welding
is observed. But, in the welding area, from the point of porosity and microstructure important variation is determined.
Variation of physical and mechanical properties together with the welding parameters is examined at the end of
experimental studies. Finally optimum welding parameters are determined for ıron-based powder metal parts.
Bookmark/Search this post with
Abstract (Original Language):
Metal tozlarının preslenerek üretildiği toz metal parçaların günümüzde birleştirilmesine de ihtiyaç duyulmaktadır.
Bu çalışmada demir esaslı toz metal malzemeden toz metalürjisi teknikleri kullanılarak 4x12x70mm3 boyutlarında
toz metal parçalar üretilmiştir. Sinterlenmiş toz metal parçalar birbirine elektrik direnç kaynağı ile belirli şartlarda
kaynatılarak elde edilen kaynak bağlantısının mekanik özellikleri ve mikro yapı değişimleri incelenmiştir. Deneysel
çalışmalar sonunda toz metal parçaların elektrik direnç kaynağı ile kaynatılabileceği gözlenmiştir. Fakat kaynak bölgesinde
porozite ve mikro yapı yönünden önemli yapısal değişmeler tespit edilmiştir. Deneysel çalışmalar sonucunda
kaynak parametreleriyle fiziki ve mekanik özelliklerin değişimleri incelenmiş ve optimum kaynak parametreleri belirlenmiştir.
FULL TEXT (PDF):
- 1
221-228