Buradasınız

Anasayfa » Content

TASARIMCILARIN YARATICILIĞINA BİLGİSAYAR PROGRAMLARI İLE KATKI SAĞLAMA VE BİR ÖRNEK YAZILIMIN GELİŞTİRİLMESİ

Creativity Effect For Designers With Computer Programs and Development of Example Software

Journal Name:

  • Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi

Publication Year:

  • 2004

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
The mechanism of human creativity could not be still exactly comprehensible. It was considered that, with the development of the present knowledge management software, the subconscious functions of human brain could be used efficiency. An extensive computer program can be an incitement element of the new ideas, and brings new creative designs on the paper or screen. With the results of human brain analysis, which seeks an answer to “How a trigger-effect could be given to brain”, the expectations from the software are brought up, which have an extensive effect on the subconscious functions of brain. A computer program for engineers and designers in the area of machine acoustics is prepared. In this article, the frame of the program (GAMAK) and a new approach to the growth of products with low noise level are given.
Bookmark/Search this post with
Abstract (Original Language): 
Henüz tam olarak çözülememiş olan insanın “fikir yaratma” mekanizmasının işlevsel hale gelebilmesi için mevcut bilgi yönetimi yazılımları mantığında yapılabilecek geliştirmeler sonucu bu “bilinç altı” fonksiyonunun efektif şekilde kullanılabileceği düşünülmektedir. Kapsamlı bir yazılım, tahrik elemanı vazifesi görerek yeni düşüncelerin, yeni tasarımların oluşumunu tetikleyebilir. Tetikleme görevinin tam anlamıyla gerçekleştirilebilmesi için insan beyninin çalışması incelenmiş ve elde edilen sonuçlarla tetikleyici özelliğe sahip bir yazılımdan beklenenler ortaya konmuş ve özellikle böyle bir yazılıma ihtiyaç duyulduğu düşünülen “makine akustiği” alanında çalışan tasarımcılar için bir örnek yazılım geliştirilmiştir. Bu yayında, geliştirilen yaklaşım ve sonucunda ortaya konan yazılım tanıtılacaktır.
FULL TEXT (PDF): 
PDF icon arastirmax-tasarimcilarin-yaraticiligina-bilgisayar-programlari-ile-katki-saglama-bir-ornek-yazilimin-gelistirilmesi.pdf
  • 1
71-80
  • Turkish

REFERENCES

References: 

1. Altschuller, G. (1988) Creativity as an exact science, Gordon & Breach.
2. Çavdar, K. (2000) Gürültüsü Az Konstrüksiyonlar. Doktora Tezi, Uludağ Üniversitesi Fen Bilimleri Enstitüsü,
Bursa.
3. Dietz, P. and Haje, D. (2000). Development of low noise products – computer aided guidance for the designer, Int.
Design Conference Design 2000, Dubrovnik, 87-92.
4. Frank, D. (1999) The importance of knowledge management for BMW, Int. Conf. on engineering design, vol. 1,
Munich.
5. Franke, H.J. (1995) Grundlagen der Konstruktionslehre, Umdruck zur Vorlesung, TU Braunschweig Institut für
Konstruktionslehre, Maschinen- und Feinwerkelemente.
6. Franke, H.J. and Krusche T. (1999) Design decisions derived from product requirements, CIRP International
Design Seminar, Integration of Process Knowledge into Design Support Systems, 371-382.
7. Henriksen, L.B. (2001) Knowledge management and engineering practices: the case of knowledge management,
problem solving and engineering practices. Technovation 21, Elsevier, 595-603.
8. Hughes, E.J., Richards T.G. and Tilley D.G., (2001). Development of a design support tool for fluid power system
design, Journal of Engineering Design, 12, s. 75-92.
9. ISO/TR 11688-1 (1995) Acoustics – Recommended Practice for the design of low noise machinery and
equipment, Part 1: Planning. ISO, Genf.
10. Koller, R. (1985) Konstruktionslehre für den Maschinenbau, 2. Aufl., Springer Verlag, Berlin.
11. Mann, D. and Dewulf S. (2001) Evolving the world’s systematic creativity methods, 7th European Creativity and
Innovation Conference, University of Twente, Netherlands.
12. Meerkamm, H. and Hochmuth, R. (1998) Integrated Product Development based on the Design System mfk.
Proceedings of the 5th International Design Conference, Dubrovnik.
13. Pahl, G. and Beitz W. (1997) Konstruktionslehre, Springer Verlag, 761 s.
14. Rodenacker, W. G. (1991). Methodisches Konstruieren, 4. Aufl., Springer Verlag, Berlin.
15. Roth, K. (2000) Konstruieren mit Konstruktionskatalogen. Konstruktionslehre, Band 1, 3. Aufl., Springer Verlag,
Heidelberg.
16. Schulz, J., Keutgen, I. and Birkhofer, H. (1999) User-Oriented Presentation of aviilable categorised knowledge.
Providing on-demand a flexible, relevant knowledge-base access, Int. Conf. on Engineering Design ICED 99,
Munich.
17. Tuomaala, J. (1998) Balancing the mind’s functions in creative design, IV. Int. Symposium on Product
Development in Engineering Education, Lohmar, Germany.
18. Ullmann, D.G. (2001) Robust Decision-Making for Engineering Design, Journal of Engineering Design, vol. 12.
19. Vajna, S. (2001) Wissenmanagement in der Produktentwicklung, 12. Symposium Design for X, Ed. H. Meerkamm,
Uni Erlangen-Nürnberg, Lehrstuhl für Konstruktionstechnik, Neukirchen, Germany.

Thank you for copying data from http://www.arastirmax.com