Application of Surface Wave Mitigation Method in Minimizing Blast-Induced Vibration: A Practice at TKĐ YLĐ Milas Enterprise
Journal Name:
- Ankara Üniversitesi Çevrebilimleri Dergisi
Keywords (Original Language):
| Author Name | University of Author | Faculty of Author |
|---|---|---|
Abstract (2. Language):
Seismic vibration is very important among the environmental impacts of rock blasting operations. Classical
method to minimize these vibrations is “determination of maximum amount of explosive per delay that will not cause any
damage to the environment”. In this study, a new method was used to mitigate blast-induced ground vibrations caused by
Turkish Coal Interprises (TKI) Muğla Yeniköy Lignite Interprises (YLĐ). The method is quite different from conventional
methods. It considers only seismic waves and aims to employ the most suitable time-delays among blast-hole groupings to
minimize destructive interference of the surface waves at the target location. The crucial point of the method is the use of a
pilot blast signal to model the group blast signal. Since the pilot blast signal takes account of the seismic properties of all
complex geology between the blast and the target locations, it does not require any geological model or assumption. In the
previous years, blast vibrations in the region were tried to be minimized by conventional methods but this study was
conducted due to continuity in complaints. By this method, blast vibrations could be minimized only by arranging suitable
delays between blast groups without any restrictions in mining operations.
Bookmark/Search this post with
Abstract (Original Language):
Patlatmalı kaya kazısı yapılan yerlerde, patlatmaların çevre yerlesim birimlerine olan olumsuz etkileri arasında sismik
titresimler önemli yer tutmaktadır. Söz konusu titresimleri en aza indirebilmek için alısılagelmis “Hasar sınırlarının altında
kalabilmek için gecikme basına düsen en büyük patlayıcı miktarını belirleme” yöntemi kullanılmaktadır. Bu çalısmada
Türkiye Kömür Đsletmeleri (TKĐ) Muğla Đli Yeniköy Linyitleri Đsletmesi (YLĐ) ocaklarındaki patlatma kaynaklı titresimleri
en aza indirebilmek için, mevcut yöntemden farklı olarak, yüzey dalgalarının bastırılması prensibine dayanan yeni bir
yöntem kullanılmıstır. Yeni yöntem sadece sismik dalga ile ilgilenir ve sismik dalgaların birbirleriyle yıkıcı girisimlerini
sağlayacak en uygun gecikmelerin verilmesini hedefler. Yöntemin en can alıcı noktası, pilot patlatmaya ait sismik sinyalin
kullanılarak grup patlatmaya ait sismik sinyalin modellenmesidir. Pilot sinyal, ilerlediği hat boyunca karmasık jeolojiyi de
üzerinde barındırdığı için, grup patlatmanın modellenmesinde herhangi bir varsayıma ve jeolojik modellemeye gereksinim
duyulmaz. Bölgede daha önceki yıllarda alısılagelmis yöntemle titresimler azaltılmaya çalısılmıstır ancak sikayetlerin devam
etmesi üzerine bu çalısma yapılmıstır. Bu yöntemle, madencilik faaliyetlerinde kısıtlamaya gitmeden, sadece uygun gecikme
elemanları ile patlama gruplarını ayarlayarak, titresimler hedef noktalarda en aza indirilebilmislerdir.
- 1
82-93