COMPARASION OF THE MICROLEAKAGE OF THE VARIOUS PORCELAIN LAMINATE VENEER TECHNIQUES
Journal Name:
- Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi
Key Words:
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
In this study, IPS Empress heat- pressed ceramic and refractory die techniques were used for evaluating the microleakage of porcelain laminate veneers.
Teeth preparations were standarti/ed and finish iines were placed in enamel. The shoulder of the teeth was prepared as chamfer and the ineisal as overlap. The contacts in the proximal region were not included into preparation. Also in both techniques, porcelain etching materials, silane agent, acid, time of acid etching, emamcl-dentin bonding agent and the polishing materials were standardized..
20 porcelain specimens, prepared from each system, were bonded to teeth by dual composite resin cement, Thermalcycling at 5 °C±land 55 °C±1 for 500 limes, were applied and then they were immersed into methyl blue solution for 5 hours.
After the specimens were embedded into transparent autopolimerized resin, they were inoutcd into a surface microscope and the photographs of the sections were taken by putting ınilimctric template on to the specimen sections. The photos were scanned and the data were transferred to a computer. Measurements were made on the photos by using Corel draw 8.0 Programme.
The results were evaluated by dependent and independent Wests. In the microleakagc test, there was astatistically sitmificant difference found between the shoulder and incisal edges of the refractory die porcelain specimens.
The amount of microleakagc at the shoulder region of IPS Empress specimens were lower than the refractory die specimens. The difference between them was not statistically significant. The same results were observed for the incisal region but the difference between the specimens was statistically significant.
Bookmark/Search this post with
Abstract (Original Language):
Araştırmada farklı porselen laminate vcncer tekniklerden oları IPS Empress I&ı-Basınç Dokum Tekniği ve Re-frakiörDay Tekniği ile yapılan porselen laminate vencerler mikrosızıtıtı yönünden karşılaştırmalı olarak iııcclenmıştir-
Preparasyonlar mine sınırlan içinde olmak kaydıylA kölede chamfer, insizalde overlap, embre s lirlerde kontakt noktalarını kapsamayacak şekilde yapılmış porselen asıt-leme maddesi, silan ajanı, asit, asitletne suresi, minc-dentin bonding ajanı ve polisaj malzemeleri sabit tutulmuştur.
Her iki porselen sisteminden 20' şer adet hazırlanan porselen örnekler dişlere dual polimerizasyonlu kompozit rezin siman ile yapıştırıl diktan sonra 5 °Otl, 55°C+1 de 500 kez termal siklusa tabi tutulmuş ve %5 Lk metilen mavisi boya maddesi içerisinde 5 saat bekletilmiştir. Şeffaf soğuk akril rezin içine gömülen örneklerin insizo-gıngival vdnde kesitleri alınmış ve yüzey mikroskobu ile incelenerek mıkrosızıntı değerleri milimetrik hır eşel yardımıyla işaretlenerek resimleri çekilip seaner ile bilgisayara aktarılmıştır. Corel Draw 8 0 Programı ile resimler ürerinde (1/1000 mm.) ölçümler yapılmıştır.
Yapılan bağımlı ve bağımsı? T-lesti istatistiksel analizine güre: IPS Empress ve Refraklür Dav porselen örneklerin kole ve insizal kenarları arasındaki mikro sızıntı değerlendirilmesinde istatistksel olarak anlamlı fark bulunmuş, IPS Empress ve Kefraktör Dav porselen örneklerin kole bölgesindeki sıy.ıntı IPS Empress örneklerde daha az bulunmuş fakat bu fark istatistiksel olaral önemsiz olarak belirlenmiştir. ÎPS Kmpress ve Rcfraktor Day porselen örneklerin insizal bölgesindeki sıkıntı yine IPS Empress Örneklerde daha az bulunmuş, iki gurup arasındaki farkın istatistiksel olarak önemli olduğu sonucu elde edilmiştir.
FULL TEXT (PDF):
- 1
5-12