Buradasınız

Anasayfa » Content

LEO IŞIK KAYNAKLARI

LED LIGHT SOURCES

Journal Name:

  • Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi

Publication Year:

  • 2003-2004

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
Photopolymerized composites have been used for 30 years in restorative dentistry. The light curing devices were developed in parallel to technological progress in dentistry. Nowadays, light emitting diode curing devices are being used instead of halogen light devices. I .ess heat is generated and lower energy is used by light emitting diode curing devices- In this review, the efficiency of light emitting diode curing devices will be discussed.
Bookmark/Search this post with
Abstract (Original Language): 
Renloratıi diş hekimliğinde ışık ile pdimerize olan kampo/kler yaklaşık 30 yıldır kıı 13anılmakladır. Diş tıekiınliğiııdcki teknolojik gelişmeye bağlı olarak ışık cihazları da gelişmiştir. Günümüzde halojen ışık cihazlarının yerine LED ışık cihazları kullanılmaktadır. LED ışık cihazı sayesinde daha az ısı açığa çıkmakta ve daha az enerji kullamlmaktadir. Bu derlemede, LED ışık cihazlarının etkinliğinden bahsedilecektir.
FULL TEXT (PDF): 
PDF icon arastirmax-leo-isik-kaynaklari.pdf
  • 3-1
13-17
  • Turkish

REFERENCES

References: 

1. Mills RW, Jandt KD, Ashworth SH. Dental composite depth of cure with halogen and blue ]ight emitting diode technology. Br Dent J 1999; 24:388-91.
2. Swift EJ Jr. LED curing tights. J Esthet Rcstor Dent 2002; 14:206-7.
3. Tarle Z, Meniga A, Knezevic A, Sutalo J, Ristic M, Pichler G. Composite conversion and. temperature rise using a conventional, plasma arc and an experimental blue LED curing unit. J Oral Rehabil 2002; 29:662-7.
4. Yoon T.-H, Lee Y.-K, Lim B.-S, Kim C.-W. Degree of polymerization of resin composites by different light sources. J Oral Rehabil 2002; 29:1165-73.
5. Mills RW, Uhl A, Jandt KD. Optical power outputs, spectra and dental composite depths of cure, obtained with blue light emitting diode (LED) and halogen light curing Units (LCUs). Br Dent J 2002; 26:459-63.
6. Leonard DL, Charlton DG, Roberts HW, Cohen ME. Polymerization efficiency of LED curing lights. J Esthet Restor Dent 2002; 14:286-95.
7. Dunn WJ, Taloumis LJ. Polymerization of ortodontic resin cement with light-emitting diode curing units. Am J Orthod Dcntofacial Orthop 2002; 122:236-41.
S. Uhl A, Mills RW, Vowles RWV Jandt KD. Knoop hardness depth profiles and compressive strength of selected dental composites polymerized with halogen and LED light curing technologies. J Biomed Mater Res 2002; 63:729-38.
9. Barghi N.McAHster EH. LED and halogen lights: effect of ceramic thickness and shade on curing luting resin. Compend Contin Educ Dent 2003; 24:497-504.
10. Kurachi C, Tuboy AM, Magalhaes DV, Bagnato VS. Hardness evaluation of a dental composite polymerized with experimental LED-based devices. Dent Mater 2001; 17:309-15.
11. Uhl A, Mills RW, Jandt KD. Photoinitiator dependent composite depth of cure and Knoop hardness with halogen and LED light curing units. Biomaterials 2003; 24:1787^95.
16
Atatürk Univ.Di s Hek.Fak.Derg.
(Cilt 13, Sayı:3, Cilt: 14, Sayı 1) Sayfa: 13-17, 2003-2004
ÖZEL, SOYMAN
12. Hofmann N, Siebrecht C, Hugo B, KJaiber B. Influence of curing methods and materials on the marginal seal of Class V composite restorations in vitro. Operative Dentistry 2003; 28:160-7.
13. Mills RW, Uhl A, Blackwell GB, Jandt KD. High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Bared hardness, compressive strength and radiometric properties. Biomaterials 2002; 23:2955-63.
14. Teshima W, Nomura Y, Tanaka N, Urate H, Okazaki M, Nahara Y. ESR study of camphorquinonc/ amine photoinitiator systems using blue light-emitting diodes Biomaterials 2003; 24:2097-103.
15. Jandt KD, Mills RW, Blackwell GB, Ashworth SH. Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs). Dent Mater 2000; 16:41-7.
16. Price RBT, Ehraford L, Andreou P, Felix CA. Comparison of uuartz-tungsten-halogen, light-emitting diode and plasma arc curing lights. J Adhes Dent 2003; 5:193-207.
17. Knezevic A, Tarie Z, Meniga A, Sulalo J, Pichler G, Ristic M. Degree of conversion and temperature rise during polymerization of composite resin samples with blue diodes. J Oral Rehabil 200 J; 28:586-91.
18. Meyer GR, Emst CP, Willershausen B. Decrease in power output of new light emitting diode (LED) curing devices with increasing distance to filling surface. J Adhes Dent 2002; 4:197-204.
19. Taira M, Urabe H, Hirose T, Wasaka K, Yamaki M. Analysis of photo-initiators in visible-light-cufed dental composite resins. J Dent Res 1988; 67:24-28.
20. Burgess JO, Walker RS, Porshe CJ, Rappold AT. Light curing-an update. Compend Confin Educ Dent 2002; 23:889-92.
21. Hofmann K, Hugo B, Klaiber B. Effect of irradiation, type {LED or QTH) on photo-activated composite shrinkage strain kinetics, temperature rise and hardness- Eur J Oral Sci 2002; 110:471-9.
22. Hammesfahr PD, O'Connor MT. Wang X. Light-curing technology: past, present and future. Compcnd Contin Educ Dent 2002; 23:18-24.
23. Stahl F, Ashworth SH, Jandt KDf Mills RW, Light-emitting diode (LED) polymerisation of dental composites: flexurai properties and polymerisation potential. Biomaterials 2000; 21:1379-85,
24. Craig RG, Powers JM, Restorative Dental Materials. 11th ed. Mosby, St. Louis: 2002.
25. Fan PL, Schumacher RM, Azzolin K, Eichrfliller FC. Curing-light intensity and depth of cure of resin-based composites tested according to international standards. J Am Dent Assoc 2002; 133:429^-34.
26. Uhl A, Mills RW, Jandt KD. Polymerization and light-induced heat of dental composites cured with LED and halogen technology. Biomaterials 2003; 24:1809-20.

Thank you for copying data from http://www.arastirmax.com