Buradasınız

Sülfatın beton ve betonarme elemanlara olumsuz etkisi

Journal Name:

Publication Year:

Abstract (2. Language): 
One of the reasons deteriorations constitute at the concrete and reinforced concrete structures in the time is the effect of sulfate.Naturally occuring sulfates in soils and groundwater, after a series of chemical processes, may lead to durability problems causins expansion and disintegration of the hardened concrete. Concrete that expose to sulfate ions at high-density may destroy completely. Effect of fly ashes (FA) and blast furnace slag (BFS) on properties of superplasticizer (SP) added concrete was investigated against to sufate effect. FA and BFS were added to Portland cement (PÇ 42,5) 20 % by weight of the cement. FA and BFS replacement concretes were compared with each other as well as with Portland cement concrete. 15 cm cube specimens were prepared with produced concrete and cured at 7, 28, 90 and 150 days For this purpose, high density sulfate of soils were examined by comparing the ratio of TS 12457-4 Standards. In this study, pozzolanic additions were added to changing in ratio 20 % by weight of the (PÇ. 42.5) portland cement. The 0.56 water/cement ratio and 300kg/m3 cement dozage are selected as reference. A control concrete sample is also produced having the same dozage. The performance of mineral additives concrete was obtained both in the sulphate and water cures. In this context, three series of concrete samples was produced; in two concrete samples series the certain ratio of fly ash and granulated blast furnace slag was used as additives, and one series of sample was used without additives. In order to see the effect strength and durability of concrete at high-rate sulfate, concrete samples were rested in a solution of Na2SO4(150 g / l) in accordance with ASTM C 1012. One group of specimens was kept continuously in sodium sulphate solution with concentration of 150 g/l for 5 months.. The other group samples were rested in water and compressive strengths are presented as a comparatively. At the end of each curing period, a total of 3 specimens were tested for each concrete property. Surface hardness and compressive strength of Concrete samples exposed to Sulphate effect were measured regularly. At the same time, the surface distortions and changes of weight of the samples were observed periodically. As a result, sulfate is determined to decrease upon the strength and durability of concrete structures. Moreover, The results showed that use of %20 FA(Fly Ash) as replacement of portland cement increased the strength properties of concrete samples. Economical benefit can be achieved by using pozzolanic additions in the concrete mixture. As a conclusion use of such additions, waste materials, provide both durable and economic concrete structures and ecologic balance for.
Abstract (Original Language): 
Zemin ile temas halinde olan beton ve betonarme yapılarda zamanla oluúan bozulmaların sebeplerinden biri sülfat etkisidir. Yüksek yoğunlukta sülfat iyonlarına maruz kalan beton tamamen tahrip olabilmektedir. Bu amaçla sülfat yoğunluğu yüksek toprakların sülfat oranı TS 12457–4 Standartlarına karúılaútırılarak incelendi. Yüksek oranda sülfatın betonun dayanım ve dayanıklılığına etkisini görebilmek için numuneler ASTM C 1012’ye uygun úekilde hazÕrlanmÕú 150 g/l Na2SO4 çözeltisinde 5 ay süreyle bekletilmiútir. AynÕ zamanda sülfatÕn etkisini araútÕrmak için bu numuneler 28 günlük su kürü ile dayanÕm kazanmÕú numunelerle karúÕlaútÕrÕldÕ. Sülfat etkisine maruz beton numunelerin belli aralÕklarla yüzey sertlikleri ve basÕnç dayanÕmlarÕ ölçüldü. AynÕ zamanda numunelerde meydana gelen a÷ÕrlÕk de÷iúimleri ve yüzeysel bozulmalar periyodik olarak gözlemlendi. Netice olarak sülfatÕn beton ve betonarme elemanlarda dayanÕm ve dayanÕklÕlÕ÷Õ düúürdü÷ü tespit edilmiútir. Sülfata maruz beton ve betonarme elemanlarda dayanÕklÕlÕ÷Õ artÕrmak için çimento yerine belirli oranlarda puzolanlarÕn (uçucu kül, yüksek fÕrÕn cürufu) kullanÕlmasÕndan olumlu sonuçlar elde edilmiútir. Bu çerçevede Çimento yerine puzolanlarÕn kullanÕmÕnÕn erken dayanÕmlarÕ düúürdü÷ü tespit edilmiútir. Ancak bu etkinin ilerleyen yaúlarda büyük oranda kayboldu÷u görülmekte ve sülfat etkisine maruz katkÕsÕz numuneden daha yüksek dayanÕma ulaútÕ÷Õ tespit edilmiútir. Sülfat etkisine maruz kalabilecek beton ve betonarme yapÕlarda, dayanÕm ve dayanÕklÕlÕ÷Õ arttÕrmak amacÕ ile portland çimentosunu beton karÕúÕmÕndan azaltÕlarak yerine termik santral ve demir-çelik fabrikalarÕnÕn atÕk maddesi olarak açÕ÷a çÕkan mineral katkÕ maddeleri olarak bilinen uçucu kül ve yüksek fÕrÕn cürufun kullanÕlmasÕ neticesinde olumlu sonuçlar elde edilmiútir. Çimentonun ekonomik tasarrufunun yanÕ sÕra atÕk maddelerin geri dönüúümünün sa÷lanmasÕ çevresel denge açÕsÕndan da büyük bir önem arz etmektedir.
79-85

REFERENCES

References: 

Arslan, M. (2001). Beton (Dökümü, Kalıpları,
Kusurları ve Dayanıklılığı), Atlas Yayın Dağıtımm,
yayın no 3, 1.Baskı, İstanbul, Ağustos, 157
Al-Amoudi O.S.B. (1997). Sufate attack and
reinforcement corrosion in plain and blended
cements exposed to sulfate environments,
Building and Environment, 33, 53- 61.
Baradan, B. Yazıcı, H., Ün, H. (2002). Betonarme
yapÕlarda kalÕcÕlÕk (Durabilite), DEÜ Müh. Fak.
YayÕnlarÕ, øzmir, s. 89–185
MonteÕro, P.J.M., KurtÕs, K.E. (2003). Time to
Failure for Concrete Exposed to Severe Sulfate
Attack, Cement and Concrete Research, Vol. 33,
p. 987- 993.
Karasin A. ve Do÷ruyol M.(2010). Sülfat Etkisi
Optimum Puzolanik KatkÕ Kullanımı, e-Journal
of New World Sciences Academy Engineering
Sciences, 1A0157, 6, (1), 348-357.
Nehdi M. and M. Hayek (2005). Behavior of
blended cement mortars exposed to sulfate
solutions cycling in relative humidity. Cement
and Concrete Research, 35, 731–742.
Neville A. (2004). The confused world of sulfate
attack on concrete. Cement and Concrete
Research, 34, 1275–1296.
Tosun K., YazÕcÕ H., Yi÷iter H., Baradan B. (2003).
Uçucu Kül øçeren Çimento HarçlarÕnÕn Sülfat
DayanÕklÕlÕ÷ÕnÕn øncelenmesi, V. Ulusal Beton
Kongresi. østanbul.
TS EN 12457–4, (2004). AtÕklarÕnÕn NitelendirilmesiKatÕdan. Özütleme Analizi- Granül KatÕ.
TS EN 12390-3 Beton-Sertleúmiú Beton DeneyleriBölüm 3: Deney Numunelerinde BasÕnç DayanÕmÕnÕn
Tayini.

Thank you for copying data from http://www.arastirmax.com