Buradasınız

Anasayfa » Content

SIVILAŞIR YADA SIVILAŞMAZ ZEMİNLERİN YİNELEMELİ GERİLME ORANINA BİR SEÇENEK

AN APROACH FOR CYCLIC STRESS RATIO OF LIQUEFIED OR UNLIQUEFIED SOILS

Journal Name:

  • Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi

Publication Year:

  • 2006

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In this paper an alternative analytical relationship is developed that adds soil shear wave velocities (Vs) and earthquake dominating period (T) to an earthquake and soil parameters used in the determination of cyclic loads. This relation is named as shear stress ratio (KGO). KGO is applied to 202 field data and the results are compared in accordance with the results of mathematical relation (CSR) used before. Consequently, KGO value for liquefied soil is bigger than CSR. Whereas, KGO value of unliquefied soils is smaller than CSR. A linear relation is determined between KGO and CSR.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışmada, yinelemeli (tekrarlı) yüklerin belirlenmesi için kullanılan deprem ile zemin parametrelerine, zeminin kayma dalga hızları (Vs) ve deprem dalgasının hakim periyodu da (T) eklenerek alternatif bir analitik ilişki geliştirilmiş ve kayma gerilme oranı (KGO) olarak isimlendirilmiştir. KGO 202 adet alan verisi üzerinde uygulanmış ve sonuçların daha önce kullanılan matematiksel bağıntının (CSR) sonuçlarıyla karşılaştırılmıştır. Sonuç olarak sıvılaşan zeminlerde hesaplanan yinelemeli gerilme oran değerlerinden KGO, CSR’den daha büyük, sıvılaşmayan zeminlerde ise daha küçük olduğu görülmüştür. Ayrıca KGO ile CSR arasında doğrusal bir ilişki belirlenmiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-sivilasir-yada-sivilasmaz-zeminlerin-yinelemeli-gerilme-oranina-bir-secenek.pdf
  • 2
79-91
  • Turkish

REFERENCES

References: 

Andrus R.D., Stokoe K.H. (2000): “Liquefaction Resistance of Soils from Shear-Wave
Velocity”, Journal of Geotechnical and Geoenvironmental Engineering, (ASCE) 126, pp.
1015-1025.
Gardner G.H.F., Gardner L.W., Gregory A.R. (1974): “Formation Velocity and Density the
Diagnastic Basics for Stractigraphic Traps”, Geophysics, 39, pp. 770-780.
Hardin B.O., Drenevich V.P. (1972): “Shear Modulus and Damping in Soils: Desing
Equations and Curves”, Journal of the Soil Mechanics and Foundations Division (ASCE)
98, pp. 667-692.
Ishihara K. (1996): “Soil Behaviour in Earthquake Geotechnics”, Clarendan Press, Oxford p.
350.
Liao S.S.C., Whitman R.V. (1986): “Overburden Correction Factors for SPT in Sands”,
Journal of Geotechnical Engineering (ASCE), 112, pp. 373-337.
Nazarin S., Stokoe K.H. (1984): “In Situ Shear Wave Velocity from Spectral Analysis of
Surface Waves”, Proceedings of the 8th World Conference on Earthquake Engineering, San
Francisco, Vol. III, pp. 31-38.
Robertson P.K., Woeller D.J., Finn W.D.L. (1992): “Seismic Cone Penetration Test for
Evaluating Liquefaction Potential Under Cyclic Loading”, Canadian Geotechnical Journal,
Ottawa 29, pp. 686-695.
Robertson P.K., Wride C.E. (1997): “Cyclic Liquefaction and Evaluation Based on the SPT
and CPT, NCEER Workshop on Evaluation of Liquefaction Resistance of Soils”,
Technical Report NCEER-97-0022 (Eds. Youd, T.L. and Idriss, I.M.) Buffalo, NY, 41-87.
Roesler S.K. (1979): “Anisotropic Shear Modulus due to Stress Anisotropy”, Journal
Geotechnical Engineering Division (ASCE), 105(7), pp. 871-880.
Seed H.B., Idriss I.M. (1971): “Simplified Procedure for Evaluating Soil Liquefaction
Potential”, Journal of the Soil Mechanics and Foundations Division (ASCE) 97, pp. 1249-
1273.
Seed H.B., Idriss I.M., Kiefer F.W. (1969): “Characteristics of Rock Motion During
Earthquakes”, Journal of the Soil Mechanics and Foundations Division (ASCE) 9 (SMS).
Stokoe K.H.II, Lee S.H.H., Knox D.P. (1985): “Shear Module Measurements Under True
Triaxial Stresses”, Proceedings, Advancers in the Art of Testing Soil Under Cyclic
Conditions (ASCE), 166-185.
Stokoe K.H., Nazarin S. (1983): “Effectiveness of Ground Improvement from Spectral
Analysis of Surface Waves”, Proceedings of the 8th European Conference on Soil
Mechanics and Foundation Engineering, Helsinki, pp. 91-4.
Stokoe K.H., Wright S.G., Bay J.A., Roesset J.M. (1994): “Characterization of Geotechnical
Sites by SASW Method”, Geotechnical Characterization of Site, Special volume of
ISSMFE TC10, New Delhi.
Sykora D.W. (1987b): “Cretation of a Data Base of Seismic Shear Wave Velocities for
Correlation Analysis”, Geotechnical Laboratory Miscellaneous, Paper GL 87-26.
Tabban A., Gencoğlu S. (1975): “Deprem ve Parametreleri”, Deprem Araştırma Enstitüsü
Bülteni, 11.
Terzaghi K., Peck R.B. (1948): “Soil Mechanics in Engineering Practice”, John Wiley and
Sons, New York, p.566.
Uyanık O. (2002): “Kayma Dalga Hızına Bağlı Potansiyel Sıvılaşma Analiz Yöntemi”, DEU.
Fen Bilimleri Enstitüsü (Doktora Tezi), s.190, İzmir (yayınlanmamıştır).

Thank you for copying data from http://www.arastirmax.com