Buradasınız

Anasayfa » Content

ISI ÜRETEN İÇİ DOLU KOMPOZİT BİR SİLİNDİRDE MALZEME ÖZELLİKLERİNİN ELASTİK-PLASTİK DEFORMASYONA ETKİSİ

INFLUENCE OF THE MATERIAL PROPERTIES ON THE ELASTIC-PLASTIC DEFORMATION IN A HEAT GENERATING COMPOSITE SOLID CYLINDER

Journal Name:

  • Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi

Publication Year:

  • 2013

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
Based on Tresca’s yield criterion and its associated flow rule, the elastic-plastic deformation of a centrally heated composite cylinder with fixed ends is investigated by considering the influence of geometric parameters as well as material properties such as yield strength, modulus of elasticity, Poisson’s ratio, coefficient of thermal conduction and thermal expansion. In the study, stress, strain and displacement distributions in the composite cylinder made of elastic-perfectly plastic material are derived. Stress distribution and evolution of plastic regions in the composite are presented for different levels of heat generation in the core.
Bookmark/Search this post with
Abstract (Original Language): 
Tresca akma kriteri ve birleşik akış kuralına dayanarak, iki ucu sabit, ortasından ısıtılan kompozit bir silindirin elastik-plastik deformasyonu, sadece geometrik parametrelerin etkisi değil aynı zamanda akma dayanımı, elastisite modülü, Poisson oranı, ısıl iletkenlik ve ısıl genleşme katsayıları gibi malzeme özelliklerinin de etkisi dikkate alınarak incelenmiştir. Çalışmada, elastik-mükemmel plastik malzemeden yapılmış bu kompozit silindirdeki gerilme, gerinim ve deplasman dağılımları elde edilmiştir. İçteki silindirde artan ısı üretimine göre değişen gerilme dağılımı ve plastik bölgelerin gelişimi grafiklerle gösterilmiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-isi-ureten-ici-dolu-kompozit-bir-silindirde-malzeme-ozelliklerinin-elastik-plastik-deformasyona-etkisi.pdf
  • 2
283
292
  • Turkish

REFERENCES

References: 

1. Hallam, C. B. ve Ollerton, E., “Thermal stresses in
axially connected circular cylinders”, Journal of
Strain Analysis, 8, 160-167, 1973.
2. Stanley, P. ve Chan, W. K., “The application of
thermoelastic stress analysis techniques to
composite materials”, Journal of Strain
Analysis, 23, 137-143, 1988.
3. Lee, Z.-Y., Chen, C.K. ve Hung, C.-I., “Transient
thermal stress analysis of multilayered hollow
cylinder”, Acta Mechanica, 151, 75-88, 2001.
4. Orçan, Y. ve Gamer, U., “Elastic-plastic
deformation of a centrally heated cylinder”, Acta
Mechanica, 90, 61-80, 1991.
5. Orçan, Y., “Thermal-stresses in a heat generating
elastic-plastic cylinder with free ends”,
International Journal of Engineering Science,
32, 883-898, 1994.
6. Gülgeç, M., “Influence of the temperature
dependence of the yield stress on the stress
distribution in a heat generating elastic-plastic
cylinder”, Zeitschrift fur Angewandte
Mathematik und Mechanic, 1999, 79, 210-216.
7. Gülgeç, M. ve Orçan, Y., “Elastic-plastic
deformation of a heat generating tube with
temperature-dependent yield stress”,
International Journal of Engineering Science,
38, 89-106, 2000.
8. Orçan, Y. ve Gülgeç, M., “Influence of the
temperature dependence of the yield stress on the
stress distribution in a heat-generating tube with
free ends”, Journal of Thermal Stresses, 23,
529-547, 2000.
9. Lee, S., Wang, W.L. ve Chen, J.R., “Diffusioninduced
stresses in a hollow cylinder”,
Materials Science and Engineering A, 285,
186–194, 2000.
10. Orçan, Y. ve Eraslan, A. N., “Thermal stresses
in elastic-plastic tubes with temperaturedependent
mechanical and thermal properties”,
Journal of Thermal Stresses, 24, 1097-1113,
2001.
11. Gülgeç, M.,“Thermal Stress Analysis of a Free-
End Cylinder Having a Temperature Dependent
Yield Stress Subjected to Transient Radial
Temperature Distribution”, Journal of the
Faculty of Engineering and Architecture of
Gazi University, Vol 17, No 2, 25-34, 2002.
12. Gülgeç, M.,“Elastic-Plastic Analysis of a
Cylinder Having Temperature Dependent Yield
Stress with Rigid Casing”, Journal of the
Faculty of Engineering and Architecture of
Gazi University, Vol 18, No 3, 85-96, 2003.
13. Eraslan, A.N., “Thermally Induced
Deformations of Composite Tubes Subjected to
a Nonuniform Heat Source”, Journal of
Thermal Stresses, 26, 167-193, 2003.
14. Eraslan, A.N., Şener, E. ve Argeso, H., “Stress
Distribution in Energy Generating Two-layer
Tubes Subjected to Free and Radially
Constrained Boundary Conditions”,
International Journal of Mechanical Sciences,
45, 469–496, 2003.
15. Chao, C.K., Chuang, C.T. ve Chang, R.C.,
“Thermal stresses in a viscoelastic three-phase
composite cylinder”, Theoretical and Applied
Fracture Mechanics, 48, 258–268, 2007.
16. Irfan, M. A. ve Chapman, W., “Thermal stresses
in radiant tubes due to axial, circumferential and
radial temperature distributions”, Applied
Thermal Engineering, 29, 1913–1920, 2009.
17. Bîrsan, M., “Thermal stresses in cylindrical
Cosserat elastic shells”, European Journal of
Mechanics A/Solids, 28, 94–101, 2009.
18. Shao, Z.S., Fan, L.F. ve Ma, G.W., “Theoretical
investigation on thermo-mechanical stresses in
laminated cylindrical panels”, Journal of
Thermoplastic Composite Materials, 23, 111-
136, 2010.
19. Tsukrov, I. ve Drach, B., “Elastic deformation
of composite cylinders with cylindrically
orthotropic layers”, International Journal of
Solids and Structures, 47, 25–33, 2010.
20. Incropera, F.P. ve De Witt, D.P., Fundamentals
of Heat and Mass Transfer, 2. Baskı, John
Wiley & Sons, New York, A.B.D., 1985.
21. Öztürk, A., Ortasından Isıtılan İki Ucu Sabit
Kompozit Silindirde Elastik-Plastik Gerilme
Analizi, Yüksek Lisans Tezi, Gazi Üniversitesi,
Fen Bilimleri Enstitüsü, 2001.

Thank you for copying data from http://www.arastirmax.com