Buradasınız

TİTANYUMUN ESASLI YAKIT KATKI MADDESİNİN DİZEL MOTOR PERFORMANS VE EMİSYONLARI ÜZERİNDEKİ ETKİSİ

INFLUENCE OF TITANIUM BASED FUEL ADDITIVE ON DIESEL ENGINE PERFORMANCE AND EMISSIONS

Journal Name:

Publication Year:

Keywords (Original Language):

Abstract (2. Language): 
Fuel additives provides an increase on engine performance and a reduction in the amount of the exhaust emissions as a result of improving fuel properties and combustion efficiency of internal combustion engines. In this experimental study, it is investigated the effect of using titanium (diizopropoksit bis) as a fuel additive on diesel engine and emissions. Titanium fuel additive and diesel fuel (D) were mixed with 25, 50, 75, 100 ppm values. In order to determine the performance and exhaust emissions characteristics, a single cylinder diesel engine was fuelled with blended fuels and tested at full load conditions. In conclusion, engine torques and power values of blended fuels were found to have similar values of diesel while specific fuel consumption values decreased. The use of titanium as a fuel additive has led to significant reductions in engine emissions. In particular, CO and soot emissions decreased up to 64.56% and 45.19% respectively.
Abstract (Original Language): 
Yakıt katkı maddeleri, yakıt özelliklerini iyileştirmekte ve yanma verimini arttırmaktadır. Bunun sonucu olarak içten yanmalı motorların performans ve egzoz emisyon değerlerinde önemli iyileşmeler sağlanmaktadır. Bu çalışmada titanyumun içerikli yakıt katkı maddesinin dizel motor performans ve emisyonları üzerindeki etkisi deneysel olarak incelenmiştir. Titanyum (diizopropoksit bis) yakıt katkı maddesi, dizel yakıtıyla (D) 25, 50, 75 ve 100 ppm değerlerinde karıştırılmış ve hazırlanan her bir karışım tek silindirli bir dizel motorda, tam yük şartlarında performans ve emisyon testlerine tabi tutulmuştur. Yapılan testler sonucunda karışım yakıtların tork ve güç değerleri, dizel yakıtı değerleriyle benzerlikler gösterirken, özgül yakıt tüketimi değerlerinde hafif düzeyde düşüşler saptanmıştır. Egzoz emisyon değerlerinde önemli derecede azalmalar gerçekleşmiştir. Özellikle CO ve is emisyonu değerlerinde sırasıyla %64,56 ve %45,19’lara varan azalmalar olmuştur.
671
676

REFERENCES

References: 

1. Uherek, E., Halenka, T., Borken-Kleefeld, J.,
Balkanski, Y., Berntsen, T., Borrego, C., Gauss,
M., Hoor, P., Juda-Rezler, K., Lelieveld, J., Melas,
D., Rypdal, K. ve Schmid, S., “Transport impacts
on atmosphere and climate: Land transport”,
Atmospheric Environment, Cilt 44, 4772-4816,
2010.
2. Prasad, R. ve Bella, V.R., “A Review on Diesel
Soot Emission, its Effect and Control”, Bulletin of
Chemical Reaction Engineering & Catalysis,
Cilt 5, No 2, 69-86, 2010.
3. Faiz, A., Weaver, C.S. ve Walsh, P.W., Air
Pollution from Motor Vehicles: Standarts and
Texhnologies for Controlling Emissions, The
World Bank, Washington, 1996.
A.Keskin ve Ark. Titanyumun Esaslı Yakıt Katkı Maddesinin Dizel Motor Performans ve…
676 Gazi Üniv. Müh. Mim. Fak. Der. Cilt 28, No 3, 2013
4. Bosch, Emissions-Control Technology for
Diesel Engines, Robert Bosch GmbH, Germany,
2005.
5. Keskin, A., Gürü, M. ve Altıparmak, D.,
“Influence of metallic based fuel additives on
performance and exhaust emissions of diesel
engine”, Energy Conversion and Management,
Cilt 52, 60-65, 2011.
6. Kannan, G.R., Karvembu, R. ve Anand, R.,
“Effect of metal based additive on performance
emission and combustion characteristics of diesel
engine fuelled with biodiesel”, Applied Energy,
Cilt 88, 3694–3703, 2011.
7. Tsanaktsidis, C.G., Christidis, S.G. ve Favvas,
E.P., “A novel method for improving the
physicochemical properties of diesel and jet fuel
using polyaspartate polymer additives”, Fuel, Cilt
104, 155-162, 2013.
8. Hancsok, J., Bubalik, M., Beck, A. ve Baladincz,
J., “Development of multifunctional additives
based on vegetable oils for high quality diesel and
biodiesel”, Chemical Engineering Research and
Design, Cilt 86, 793-799, 2008.
9. Keskin A, M.Gürü, D. Altıparmak, Investigation
of performance and emissions characteristics of
tall oil biodiesel with Co based additive, Energy
Sources Part A, 32(20), 1899-1907, 2010.
10. Yang, H.H., Lee, W.J., Mi, H.H., Wong, C.H. ve
Chen, C.B., “PAH emissions influenced by Mnbased
additive and turbocharging from a heavyduty
diesel engine”, Environment International,
Cilt 24, No 4, 309-403, 1998.
11. İ., Çelikten ve M., Gürü, “Petrodiesel And
Rapeseed Oil Biodiesel With Manganese Based
Additive”, Journal of the Faculty of
Engineering and Architecture of Gazi
University, Cilt 26, No 3, 643-648, 2011.
12. Keskin, A., Gürü, M. ve Altıparmak, D.,
“Influence of tall oil biodiesel with Mg and Mo
based fuel additives on diesel engine performance
and emission”, Bioresource Technology, Cilt 99,
6434-6438, 2008.
13. Kelso, D.T., Epperly, W.R. ve Hart, M.L.,
“Effects of platinum fuel additive on the emissions
and efficiency of diesel engines”, SAE paper, No:
901492, 1990.
14. Gürü, M., Artukoğlu, B. D., Keskin, A. ve Koca,
A., “Biodiesel production from waste animal fat
and improvement of its characteristics by
synthesized nickel and magnesium additive”,
Energy Conversion and Management, Cilt 50,
498-502, 2009.
15. Demers, D. and Walters, G., Guide to Exhaust
Emission Control Options, BAeSAME, Bristol,
1999.
16. Skalska, K., Miller, J.S. ve Ledakowicz, S.,
“Trends in NOx abatement: A review”, Science of
the Total Environment, Cilt 408, 3976-3989,
2010.

Thank you for copying data from http://www.arastirmax.com