1. Santos, E.C., Morita, M., Shiomi, M., Osakada, K.
ve Takahashi, M., “Laser gas nitriding of pure
titanium using CW and pulsed Nd: YAG lasers”,
Surface and Coatings Technology, Cilt 201,
1635-1642, 2006.
2. Tian, Y.S., Chen, C.Z., Li, S.T. ve Huo, Q.H.,
“Research progress on laser surface modification
of titanium alloys”, Applied Surface Science, Cilt
242, 177-184, 2005.
Şekil 3. Saf titanyum, ısıl işlemsiz akımsız Ni-B kaplama, 450°C, 650°C ve 850°C’de 1 saat ısıl işlem görmüş
akımsız Ni-B kaplamaların XRD spektrumları (XRD spectra of pure titanium, the non-heat treated, the electroless Ni-B coatings
annealed at 450°C, 650°C, and 850°C for 1 hour)
F. Bülbül ve İ. Çelik Isıl İşlemin Akımsız Ni-B Kaplanan Saf Titanyumun Yapısına Etkisi
94 Gazi Üniv. Müh. Mim. Fak. Der. Cilt 29, No 1, 2014
3. Stolyarov, V.V., Zhu, Y.T., Lowe, T.C. ve
Valiev, R.Z., “Microstructure and Properties of
Pure Ti Processed by ECAP and Cold Extrusion”,
Material Science and Engineering A, Cilt 303,
82-89, 2001.
4. Lowe, T.C. ve Zhu, Y.T., “Commercialization of
Nanostructured Metals Produced by Severe
Plastic Deformation Processing”, Advanced
Engineering Materials, Cilt 5, 373-378, 2003.
5. Çelik, İ., “Ultra İnce Taneli Saf Titanyumun
Farklı Yüzey Yöntemleri ile Oksidasyonu”,
Yüksek Lisans Tezi, Atatürk Üniversitesi, Fen
Bilimleri Enstitüsü, Erzurum, 2010.
6. Vreeling, J.A., Ocelík, V. ve De Hosson, J.T.M.,
“Ti-6Al-4V strengthened by laser melt injection
of WCp particles”, Acta Materialia, Cilt 50,
4913-4924, 2002.
7. Vijayaraghavan, T.V. ve Bensalem, A.,
“Electrodeposition of apatite coating on pure
titanium and titanium alloys”, Journal of
Materials Science Letters, Cilt 13, No 24, 1782-
1785, 1994.
8. Yen, S.K. ve Lin, C.M., “Cathodic reactions of
electrolytic hydroxyapatite coating on pure
titanium”, Materials Chemistry and Physics,
Cilt 77, 70–76, 2002.
9. Bülbül, F., “Antibacterial activity of electroless
Ni–B Coating”, Material Science and
Technology, Cilt 27, No 10, 1540-1546, 2011.
10. Rao, Q.L., Bi, G., Lu, Q.H., Wang, H.W., ve Fan,
X.L., “Microstructure evolution of electroless Ni-
B film during its depositing process”. Applied
Surface Science, Cilt 240, 28-33, 2005.
11. Dervos, C.T., Novakovic, J. ve Vassiliou, P.,
“Vacuum heat treatment of electroless Ni–B
coatings”, Material Letters, Cilt 58, 619-623,
2004.
12. Delaunois, F., Petitjean, J.P., Lienard, P. ve
Jacob-Duliere, M., “Autocatalytic electroless
nickel-boron plating on light alloys”, Surface
and Coatings Technology, Cilt 124, 201-209,
2000.
13. Gawrilow, G.G., Chemical (electroless) nickel
plating, Portcullis Press, LTD, Redhill, p. 55,
1979.
14. Bulbul, F., “The Effects of Deposition Parameters
on Surface Morphology and Crystallographic
Orientation of Electroless Ni-B Coatings”,
Metals and Materials International, Cilt 17, No
1, 67-75, 2011.
15. Vitry, V., Delaunois, F. ve Dumortier C.,
“Mechanical properties and scratch test resistance
of nickel–boron coated aluminium alloy after
heat treatments”, Surface and Coatings
Technology, Cilt 202, 3316-3324, 2008.
16. Sahoo, P. ve Das, S.K., “Tribology of electroless
nickel coatings – A review”, Materials and
Design, Cilt 32, 1760-1775, 2011.
17. Baskaran, I., Sakthi, K.R., Narayanan, T.S.N. ve
Stephen, A., “Formation of electroless Ni–B
coatings using low temperature bath and
evaluation of their characteristic properties”,
Surface and Coatings Technology, Cilt 200, No
24, 6888-6894, 2006.
18. Narayanan, S.T.S.N, Krishnaveni, K. ve Seshadri
S.K., “Electroless Ni–P/Ni–B duplex coatings:
preparation and evaluation of micro-hardness,
wear and corrosion resistance”, Materials
Chemistry and Physics, Cilt 82, No 3, 771-779,
2003.
19. Venkatakrishnan, P.G., Nazirudeen, M.S.S. ve
Narayanan, S.T.S.N., “Electroless Ni-B-P ternary
alloy coatings: preparation and evaluation of
characteristic properties”. European Journal of
Science Research, Cilt 82, 506-514, 2012.
20. Bülbül, F., Altun, H., Küçük, Ö. ve Ezirmik, V.,
“Tribological and Corrosion Behaviour of
Electroless Ni-B Coating Possessing a Blackberry
Like Structure”, Metals and Materials
International, Cilt 18, No 4, 631-637, 2012.
21. Zhu, X., Processability of Nickel-Boron
Nanolayer Coated Boron Carbide, Doktora
Tezi, Sayfa 6, Virginia Polytechnic Institute and
State University, Materials Science and
Engineering, 2008.
22. Lenfant, P., Legras, C. ve Kervella, B., “Sur la
structure des catalyseurs "borure de nickel",
Comptes Rend Academy Science, Cilt 260,
1636, 1965.
23. Hofer, L.J.E., Shultz, J.F., Panson, R.D. ve
Anderson, R.B., “The Nature of the Nickel
Boride Formed by the Action of Sodium
Borohydride on Nickel Salts”, Inorganic
Chemistry, Cilt 3, 1783-1784, 1964.
24. Anik, M., Körpe, E. ve Şen, E., “Effect of coating
bath composition on the properties of electroless
nickel–boron films”, Surface and Coatings
Technology, Cilt 202, No 9, 1718-1727, 2008.
25. Raghavan, V., “B-Fe-Ni (Boron-Iron-Nickel)”,
Journal of Phase Equilibria and Diffusion, Cilt
28, No 4, 377-378, 2007.
26. http://www.osti.gov/bridge/servlets/purl/28367-
b7igK6/webviewable/28367.pdf
27. Kapfenberger, C., Hofmann, K. ve Albert, B.,
“Room-temperature synthesis of metal borides”,
Solid State Sciences, Cilt 5, 925–930, 2003.
28. Gumeniuk, R., Borrmann, H. ve Leithe-Jasper,
A., “Refinement of the crystal structures of
trinickel boron, Ni3B, and tripalladium boron,
Pd3B”, Zeitschrift Für Kristallographie: New
Crystal Structures, Cilt 221, No 4, 425-426,
2006.
29. Pal, S., Verma, N., Jayaram, V., Biswas, S.K. ve
Riddle, Y.,“Characterization of phase
transformation behaviour and microstructural
development of electroless Ni–B coating”
Material Science and Engineering A, Cilt 528,
8269-8276, 2011.
30. Delaunois, F. ve Lienard, P., “Heat treatments for
electroless nickel–boron plating on aluminium
alloys”, Surface and Coatings Technology, Cilt
160, 239-248, 2002.
31. Oraon, B., Majumdar, G. ve Ghosh, B.,
“Improving hardness of electroless Ni–B coatings
using optimized deposition conditions and
annealing”, Materials and Design, Cilt 29, 1412-
1418, 2008.
Thank you for copying data from http://www.arastirmax.com
