Buradasınız

Anasayfa » Content

Investigating MIDEA Corrosion Treatment on Carbonic Simple Steel in Amin Unit of Isfahan Refinery

Journal Name:

  • International Journal of Science and Engineering Investigations

Publication Year:

  • 2012

Key Words:

Author NameUniversity of Author
Abstract (2. Language): 
α-MDEA corrosion characters in addition to operatory situation depend on its density. In this survey we investigate applying density effect of 10% to 30% weight on solvent corrosion situation on carbonic simple steel on collision or temperature different situation. Results shows that carbonic simple steel corrosion Rate is minimum in 10% density, but its passio film is unstable. Pasio film for stable in 37% density and stable on different temperatures and even on collision, because it’s produce low corrosion rate in different temperature, density or collision, in this phase show that α-MDEA density minimum for creating acceptable situation of pasio film is equal to 31 wt%. In this density there is not any possibility for making Iron oxide and creating flow increase on the polarization curves passio Region.
Bookmark/Search this post with
FULL TEXT (PDF): 
PDF icon arastirmax-investigating-midea-corrosion-treatment-carbonic-simple-steel-amin-unit-isfahan-refinery.pdf
  • 10
49-53
  • English

REFERENCES

References: 

1] Rice, W., "Hydrogen Production from Methane Hydrate with Sequestering of Carbon Dioxide", International Journal of Hydrogen Energy, 2006
[2] Samimi, Amir, Zarinabadi, Soroush, An Analysis of Polyethylene Coating Corrosion in Oil and Gas Pipelines, Journal of American science,U.S.A.,2011
[3] Zarinabadi, Soroush, Samimi, Amir, Scrutiny Water Penetration in Three-layer Polyethylene Coverage, Journal of American science, U.S.A., 2011
[4] Samimi, Amir, Zarinabadi, Soroush, "Reduction of greenhouse gases emission and effect on environment.", Australian journal of basic and applied science, 752-756, 2011
[5] Zarinabadi, Soroush, Samimi, Amir," Problems of hydrate formation in oil and gas pipes deal," Australian journal of basic and applied science, 2011
[6] Zarinabadi, Soroush, Samimi, Amir, Erfan Ziarifar, Mohammad Sadegh Marouf, Modeling and Simulation for Olefin Production in Amir Kabir Petrochemical, Proceedings of the World Congress on Engineering and Computer Science 2010 Vol II WCECS ,San Francisco, USA,2010
[7] Samimi, Amir, Zarinabadi, Soroush, Application Polyurethane as Coating in Oil and Gas Pipelines, International Journal of science and investigations, France, pp.43-45, 2012
[8] Samimi, Amir, Zarinabadi, Soroush, Samimi, Marzieh, Solar Energy Application on Environmental Protection, International Journal of science and investigations, France, pp.21-24, 2012
[9] Setoudeh, Mehrdad, Samimi, Amir, Zarinabadi, Soroush, Almasinia, Babak, Nazem, Esmaeil, Rezaei, Rohollah, hedayati, Abbas, Experimental Study of Factors Affecting Corrosion in Gas Wells Using Potantio Acetate and Galvan Acetate Tests, International Journal of science and investigations,pp.13-16,2012
[10] Samimi, Amir, Preventing Hydrate Formation in Gas Transporting Pipe Lines with Synthetic Inhibitors, International Journal of science and investigations, France, pp.48-50, 2012
[11] Samimi, Amir, Zarinabadi, Soroush, Setoudeh, Mehrdad, Safavian, Amir, Review Applications to Prevent Corrosion Reducing Gas Pipe Line, International Journal of Basic and Applied science, Indonesia, pp.423-428, 2012
[12] Samimi, Amir, Zarinabadi, Soroush, Setoudeh, Mehrdad, Safety and Inspection for Preventing Fouling in Oil Exchangers, International Journal of Basic and Applied science, Indonesia, pp.429-434, 2012
[13] Samimi, Amir, Zarinabadi, Soroush, The Comparison of Increasing Method for Petroleum Pits Output (Fluids Dynamic), International Journal of Basic and Applied science, Indonesia, pp.435-439, 2012

Thank you for copying data from http://www.arastirmax.com