Buradasınız

Anasayfa » Content

Investigation of a Variable Speed Pumped Storage Power Plant by Novel Control Technology

Journal Name:

  • International Journal of Science and Engineering Investigations

Publication Year:

  • 2013

Key Words:

Author NameUniversity of Author
Abstract (2. Language): 
It’s necessary, to achieve following benefits easily by variable Speed pumped storage power plant (PSP). Benefits of these plants included, as following statements: stability and balance making referred to power system request, increasment of optimum efficiency in production mode and consumption mode, high speed for grid’s requirements response in critical moments (such as: disturbances, black out,…); Todays, Doubly Fed Asynchronous Machine (DFAM) technology by means of modern equipment (Multi-Level-VSC, Cycloconvertor) and employment of them is considered to achieve mentioned purposes, synchronous machines instead in PSP units. In this paper, technical evaluation& comparison between the several types of PSP’s control methods is presented, also as novelty, a PSP’s unit is modeled (as mechanic, electric, hydraulic& control system) and simulated by Direct Torque Control (DTC) technology and TwoLevelVSC equipment. Combination of TwoLevelVSC and DTC method together caused to increase very high dynamic response of PSP in uninterrupted operation the whole of times. The results of paper in Generation mode, describe to increase efficiency in one unit of 4×250MW PSP that justifies variable Speed PSP application. The simulations performed by Matlab/Simulink& mfile. This paper extracted from thesis of MSc called “Simulation of Variable Speed Pumped Storage Power Plants”.
Bookmark/Search this post with
FULL TEXT (PDF): 
PDF icon ijsei-21813-12.pdf
  • 18
91-98
  • English

REFERENCES

References: 

[1] J. Janing, A. Schwery, Next generation variable speed pumped-storage power station, IEEE Trans. Power Electron, vol. 25, Feb 2010, pp. 442-452.
[2] Mohammed O. A., Liu Z. and Liu S., Stator power factor adjustable direct torque control of doubly-fed induction machines, IEEE International Conf. on Electric Machines and Drives, 2005, pp. 572–578.
[3] M. Aghasi, D. A. Khaburi, V. Faraji and H. Behnia, A Comparative Study on Predictive and ISVM Direct Torque Control Methods for a Doubly Fed Induction achine Fed by an Indirect Matrix Converter, Iranian Journal of Electrical & Electronic Engineering, Vol. 8, No. 2, June 2012.
[4] G. Magsaysay, T. schuette, R.J. Fostnk, Use of a Static Frequency converter for Rapid load Response in pumped - Storage plants, IEEE Transactions on Energg Convertion, Vol.10, NO.4, December 1995, pp 694-699.
[5] S. M. Hosseni, S. A. Banihashem, Y. Darbandy, Use of Static Frequency Converter Technology in Pumped Storage Power Plant for Dynamic Reaction of Load Response (SFC), International Power System Conference (PSC 2006),Tehran, Iran (Persian).
[6] H. Arabian, H. Abadi, The reliability model of Wind Turbine with Brushless Doubly Fed Induction Generator, Thesis Doctoral on Power-electrical Engineering, Sharif University of Industrial, Tehran, Iran, 2009.
[7] S. M. Hosseni, M. R. Semsar, Magid Agasi, Technical& Economical Comparison between Control methods of Pumped storage Power Plants, International Conference on Dams & Hydropower (ICDH2012), Tehran, Iran.
[8] M. R. Semsar, Technical Evaluation of Variable Speed Pumped storage Power Plants, Seminar of MSc., West Tehran Branch, Islamic Azad University, Tehran, Iran, 2013.
[9] G. Abad, J. Lo´pez, M. A. Rodrı´guez, L. Marroyo, G. Iwanski , Doubly Fed Induction Machines Modeling Control For Wind Energy Generation, (a John Willy & Sons, INC., Publication, IEEE Press, 2011).
[10] G. Abad, Predictive Direct Control Techniques Of The Doubly Fed Induction Machine For Wind Energy Generation Application, Thesis Doctoral en el programa de Doctorado, AUTOMÁTICA Y ELECTRÓNICA, Goi Eskola Politeknikoa - Escuela Politécnica Superior - Faculty of Engineering, 03 de julio de, 2008.
[11] G. Abad, M. A. Rodr_ıguez, and J. Poza, Two Level VSC Based Predictive Direct Torque Control of the Doubly Fed Induction Machine with Reduced Torque and Flux Ripples at Low Constant Switching Frequency, IEEE Trans. Power Electron, Vol. 23, No. 3, May 2008.
[12] G. Abad, M. A. Rodriguez, J. Poza, and J. M. Canales, Direct Torque Control for Doubly Fed Induction Machine-Based Wind Turbines Under Voltage Dips and Without Crowbar Protection, IEEE Trans. Energy Conversion, Vol. 24, No. 3, 2010, pp. 586–588.
[13] G. Abad, M. A. Rodríguez, and J. Poza, Two Level VSC Based Predictive Direct Power Control of the Doubly Fed Induction Machine
International Journal of Science and Engineering Investigations, Volume 2, Issue 18, July 2013 98
www.IJSEI.com Paper ID: 21813-12
ISSN: 2251-8843
with Reduced Power Ripple at Low Constant Switching Frequency, IEEE Trans. Energy Conversion, Vol. 23, No. 2, June 2008 pp. 570–580.
[14] V. C. Ganti, B. Singh, S. K Aggarwal, T. C. Kandpal , DFIG-Based Wind Power Conversion With Grid Power Leveling for Reduced Gusts12, IEEE TRANSACTIONS ON SUSTAINABLE ENERGY, VOL. 3, NO. 1, JANUARY 2012.
[15] Y. Pannatier, B. Kawkabani, C. Nicolet, ,J. J. Simond, A. Schwery, P. Allenbach, Investigation of Control Strategies for Variable-Speed Pump-Turbine Units by Using a Simplified Model of the Converters, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 57, NO. 9, SEPTEMBER 2010.
[16] S. M. Hosseni, M. Agasi,“Direct Power Control of Doubly Fed Asynchronous Machines (DFAM) in Variable Speed Pumped storage Power Plants in Generation Mode ”, International Conference on Dams & Hydropower (ICDH2012), Tehran, Iran.

Thank you for copying data from http://www.arastirmax.com