Buradasınız

Electrostatic Separation in Recovering the Food from Municipal Solid Waste

Journal Name:

Publication Year:

Abstract (2. Language): 
Food waste draws globally attention as one-third of food produced for human consumption is wasted yearly. This means the economic value from limited natural resources such as water, nutrients, land and energy are lost. Consequently the greenhouse gas emissions caused by food waste are emitted inevitably. Disposal of food potentially contributes 22% to the global warming. The waste foods are often mixed by other non-food waste, making them hard to be reused. In this country, the daily food waste has reached 7650 ton since 2002. This figure is forecasted to double up to 13500 ton in 2020, highly due to the lack of food waste recovery system. Throughout this study, we made a novel attempt to assess on recovering foods from the solid waste, which is composed of the food and non-food such as plastic and glass. An electrostatic separator was employed to separate the food from non-food, in where both wastes are prepared as multi-size granules. The recovery efficiency of food can reach 75.9% and 79.8%, from the mixture of glass and plastic, respectively. When being used for the multiple mixture separation, the separator recovers 79.3% of food, showing its feasibility in recycling the food waste and it is environmentally friendly. The study also highlights critical aspects that worth to be considered for reliability and efficiency of the electrostatic separation process, especially for the multiple mixture recovery in real environment.
51
56

REFERENCES

References: 

[1] FAOSTAT. 2010a. FAO Statistical Yearbook 2009 - Agricultural Production, available at: http://www.fao.org/economic/ess/publications-studies/statistical-yearboo...
[2] FAOSTAT. 2010b. Food Balance Sheets 2007, available at: http://faostat.fao.org/site/354/default.aspx
[3] FAO. 2010. Compendium on post-harvest operations, available at: http://www.fao.org/inpho/content/compend/toc_main.htm
[4] Lundqvist, J., Fraiture, C. de & Molden, D. 2008. Saving Water: From Field to Fork - Curbing Losses and Wastage in the Food Chain. SIWI Policy Brief. SIWI.
[5] Gustavsson, J. 2010. The Climate Change Impact of Retail Waste from Horticultural Products, Degree project for Master of Science in Environmental Sciences, Department of Plant and Environmental Sciences, University of Gothenburg, Sweden.
[6] Hamatschek, E. 2010. Current Practice of Municipal Solid Waste Management in Malaysia and the Potential for Waste-to-Energy Implementation. In ISWA World Congress 2010. Hamburg.
[7] Manaf, L.A., M.A.A. Samah, and Z.N.I.M. 2009. Municipal Solid Waste Management in Malaysia: Practice and challenges. Waste Management 29, 2002-2906.
[8] Periathamby, A., F.S. Hamid, and K. Khidzir. 2009. Evolution of Solid Waste Management in Malaysia: Impacts and Implications of the Solid Waste Bill, 2007. Journal of Material Cycles and Waste Management 11, 96-103.
[9] National Solid Waste Management Department. 2013. [accessed: June 2013]. http://www.kpkt.gov.my/jpspn_en_2013/main.php
[10] Effie, P. 2012. Climate change implications of food waste in Malaysia, in 10th Annual Waste Management Conference and Exhibition: Kuala Lumpur, Malaysia.
[11] Parfitt, J., Barthel, M. & Macnaughton, S. 2010. Food waste within food supply chains: quantification and potential for change to 2050, Philosophical Transactions of the Royal Society 365, 3065-3081.
[12] Stuart, T. 2009. Waste - Uncovering the Global Food Scanda. Penguin Books: London.
[13] Asnani, P.U. 2006. Solid Waste Management. India Infrastructure Report, 160-189.
[14] Bogner, J., Pipatti, R., Hashimoto, S., Diaz, C., Mareckova, K., Diaz, L., Gregory, R. 2008. Mitigation of Global Greenhouse Gas Emissions from Waste: Conclusions and Strategies from the Intergovernmental Panel on Climate Change (IPCC) Fourth Assessment Report. Working Group III (Mitigation). Waste Management and Research, 26(1), 11-32.
[15] Weitz, K.A., Thorneloe, S.A., Nishtala, S.R., Yarkosky, S. and Zannes, M. 2002. The Impact of Municipal Solid Waste Management on Greenhouse Gas Emissions in the United States. Journal of the Air and Waste Management Association, 52(9), 1000-1011.
[16] Galway Country Council. 2013. Waste Management, available at: http://www.galway.ie/en/Services/Environment/WasteManagement/
[17] Kathirvale, S., Muhd Yunus, M.N., Sopian, K. and Samsuddin, A.H. 2004. Energy Potential from Municipal Solid Waste in Malaysia. Renewable Energy, 29(4), 559-567.
[18] Eusuf, M.A., Che Omar, C.M., Affendi, S. and Ibrahim, M. 2007. An Overview on Waste Generation Characteristic in some Selected Local
Authorities in Malaysia, in Proceedings of International Conference on Sustainable Solid Waste Management.
[19] Yatima, S.R.M. and Arshad, M.A. 2010. Household Solid Waste Characteristics and Management in Low Cost Appartment in Petaling Jaya, Selangor. Health and Environment Journal, 1(2).
[20] Local Government Department. 2005. National Strategic Plan for Solid Waste Management. Ministry of Housing and Local Government Malaysia.
[21] Meen-Chee, H. and S. Narayanan. 2006. Restoring the Shine to a Pearl: Recycling Behaviour in Penang, Malaysia. Development and Change 37, 1117-1136.
[22] Saeed, M.O., M.N. Hassan and M.A. Mujeebu. 2009. Assessment of Municipal Solid Waste Generation and Recyclable Materials Potential in Kuala Lumpur, Malaysia. Waste Management 19, 2209-2213.
[23] Salleh, M.N. 2003. Physical and Chemical Characteristics of Solid Wastes Disposed at Taman Beringin Landfill, Kuala Lumpur. Doctoral dissertation, Universiti Putra Malaysia.
[24] Mohabuth, N., & Miles, N. 2005. The Recovery of Recyclable Materials from Waste Electrical and Electronic Equipment (WEEE) by Using Vertical Vibration Separation. Resources, conservation and recycling, 45(1), 60-69.
[25] Calin, L., Mihalcioiu, A., Das, S., Neamtu, V., Dragan, C., Dascalescu, L., & Iuga, A. 2008. Controlling Particle Trajectory in Free-fall Electrostatic Separators. Industry Applications, IEEE Transactions on, 44(4), 1038-1044.
[26] Guo, Q., Yue, X., Wang, M., & Liu, Y. 2010. Pyrolysis of Scrap Printed Circuit Board Plastic Particles in a Fluidized Bed. Powder Technology, 198(3), 422-428.
[27] Yamane, L. H., de Moraes, V. T., Espinosa, D. C. R., & Tenório, J. A. S. 2011. Recycling of WEEE: Characterization of Spent Printed Circuit Boards from Mobile Phones and Computers. Waste management, 31(12), 2553-2558.
[28] Ahmed, D. M., Yousef, A. R., & Hassan, H. S. A. 2010. Relationship between Electrical Conductivity, Softening and Color of Fuerte Avocado Fruits during Ripening.
[29] Wang, S., Monzon, M., Gazit, Y., Tang, J., Mitcham, E. J., & Armstrong, J. W. 2005. Temperature-Dependent Dielectric Properties of Selected Subtropical and Tropical Fruits and Associated Insect Pests. TRANSACTIONS-AMERICAN SOCIETY OF AGRICULTURAL ENGINEERS, 48(5), 1873.
[30] Wu, J., Li, J., & Xu, Z. 2008. Electrostatic Separation for Multi-size Granule of Crushed Printed Circuit Board Waste using Two-roll Separator. Journal of Hazardous materials, 159(2), 230-234.
[31] Dascalescu, L., Dragan, C., Bilici, M., Beleca, R., Hemery, Y., & Rouau, X. 2010. Electrostatic Basis for Separation of Wheat Bran Tissues. Industry Applications, IEEE Transactions on, 46(2), 659-665.
[32] American Chemistry Council. 2013. Day Four - Why do They Float and Sink, available at: http://plastics.americanchemistry.com/Education-Resources/Hands-on-Plast...
[33] Batra, S. K., Ghosh, T. K., & Zeidman, M. I. 1989. An Integrated Approach to Dynamic Analysis of the Ring Spinning Process Part II: With Air Drag. Textile Research Journal, 59(7), 416-424.
[34] Hou, S., Wu, J., Qin, Y., & Xu, Z. 2010. Electrostatic Separation for Recycling Waste Printed Circuit Board: A Study on External Factor and A Robust Design for Optimization. Environmental science & technology, 44(13), 5177-5181.

Thank you for copying data from http://www.arastirmax.com