A Study on the Prevention Dote and End Cheeks in Beech Logs
Journal Name:
- İstanbul Üniversitesi Orman Fakültesi Dergisi
| Author Name | Faculty of Author |
|---|---|
Abstract (2. Language):
Beech forest lands in Turkey are estimated to be 8.5 per cent of the total forests. A large part of bech wood goes to industry and especially used as lumber in furniture, plywood, rail road tie and mine timber. As it is known the wood of beech is very susceptible to «d o t e» and «e n d-checking*. Dote is an early stage of decay and has two generally recognized phases, slight and advanced. The first may have a little effect on the strength of wood, whereas the latter weakens it generally. Mayer -Wegelin (1953) carried out an experiment to determine how far density, compressive strength and work to maximum load are reduced as dote progresses. He found no reduction in density until 10 per cent of the cross area of the test pieces showed incipient decay but the impact strength was reduced to 0.18 from 0.85 Kg m/cm2 and specific gravity (volume and wt. air dry) to 0.594 from 0.690 gr/cm3 as white flecks covered all the cross section area of samples.
In the first stage cf dote there is no fungal attack, but the discoloration of sapwood occurs with oxidation of cell contents and the tyloses obstruct the vessels since parenchyma cells may live after felling as well. In advanced dote fungal effect begins and secondary walls of fibre - tra-cheids and libriform fibres are destroyed. This stage of dote is caused by fungi; Stereum purpureum, S. hirsitum, Hypoxylon coccineum, Bispora monilioides, Tremella faginea, Polyporus vaporiarius, P. adustus, Schy-zophyllum commune, Coryne sarcoides, Xylaria hypoxylon, Polystictus hirsitus and P. versicolor.
Bookmark/Search this post with
Abstract (Original Language):
Çeşitli yapraklı ağaçlarda ve özellikle Kayında kesimden sonra tomrukların biçilip işlenmesine kadar, bilhassa ormanda ve depolarda bekleme esnasında, ekonomik bakımdan meydana gelen en önemli zararlar ardaklanma ve çatlamadır. F. Kollmann (1951) e göre Kayın odununda ardaklanma ile % 60 a kadar bir değer düşmesi görülmektedir. Ardaklanma yapraklı ağaçlardan Kayın, Akçaağaç, Huş, Gürgen vb. gibi ağaçların odununda kesimden sonra meydana gelmektedir. Ardaklanma iki safhada olmaktadır. Bunlardan birisi renk değişimi ve boğulma, diğeri ise renk değişimi meydana gelen yerlerde şeritler halinde beyaz çürüklük teşekkülüdür. Eskiden bu iki safha birbirinden ayırt edilmeksizin ardaklanmanın başlangıçtan itibaren ardak mantarlarının etkisi ile meydana geldiği zannedilmekte idi. H. Zycha (1948) yaptığı araştırmalarla ardaklanmanın birinci safhası olan renk değişimi ve boğulmanın ardak mantarları etkisi ile meydana gelmediğini, ikinci safha olan beyaz çürüklüğün ise mantarlar tarafından oluşturulduğunu ortaya çıkarmıştır. Kış veya kış sonunda kesilen ağaçlarda kesimden sonra gövde ve tomruklarda ilkbahar sonlarına doğru başlamak ve yaz süresince devam etmek üzere enine kesitlerden itibaren içeriye doğru düzensiz, dil şeklinde ve gövde içersine doğru ilerlemek suretiyle, gri, grimsi kahverenkli veya kahverenkli bir renk değişimi görülmektedir. (Mayer - Wegelin 1932, 1950, 1953, E. Jahn 1932 ve H. Zycha 1948).
FULL TEXT (PDF):
- 1
55-74