Buradasınız

ELECTRONIC TUNABLE BIQUAD FILTER EMPLOYING DXCCII

Journal Name:

Publication Year:

Abstract (2. Language): 
In this paper, we present dual-X current conveyor (DXCCII) based current-mode tunable universal filters. The proposed tuneable universal filter with single-input and three-outputs can simultaneously realize current-mode high-pass (HP), band-pass (BP) and low-pass (LP) filters employing two DXCCIIs, two grounded capacitors and two NMOS transistors. Besides electronic tuneability with the control voltage applied to the gate, the topology proposed exhibits also low active and passive sensitivity. Literature survey shows that the proposed circuit employs minimum number of passive and active components among the DXCCII based filters. Non-ideal and parasitic effects are investigated and discussed. We performed simulations with PSPICE simulation program. Simulation results are given to confirm the theoretical analysis.
FULL TEXT (PDF): 
1493-1497

REFERENCES

References: 

[1] O. Çiçekoğlu, “Current-mode biquad with a minimum number of passive elements”, IEEE Trans. Circuits Syst.-II: Analog Digit. Signal Process. vol.48, 2001, pp.221–222.
[2] A. Toker, S. Özoğuz and C. Acar, “Current-mode KHN-equivalent biquad using CDBAs”, Electron. Lett. vol.35, 1999, pp.1682–1683.
[3] W. Chunhua, Z. Deshu, Y. Jianzhuo, S. Chen, X. Chen, C. Jianxin, G. Guo and S. Guangdi, “A MOCCII current-mode KHN filter and its non-ideal characteristic research”, 4th Int. Conf. ASIC, Shanghai, China, 2001, pp.289–292.
[4] M. Soliman, “Voltage mode and current mode Tow Thomas bi-quadratic filters using inverting CCII”, Int. J. Circuits Theory Appl., vol.35, 2007, pp.463–467.
[5] E. Altuntas and A. Toker, “Realization of voltage and current mode KHN biquads using CCCIIs”, Int. J. Electron. Commun. vol.56, 2002, pp.45–49.
[6] M-A. İbrahim, S. Minaei and H. Kuntman “A 22.5MHz current-mode KHN-biquad using differential voltage current conveyor and grounded passive elements” Int. J. Electron. Commun. (AEU), vol.59, 2005, pp.311–318.
[7] S. Minaei and S. Türköz,“Current-Mode Electronically Tunable Universal Filter Using Only Plus-Type Current Controlled Conveyors and Grounded Capacitors” ETRI Journal, vol.26(4), 2004.
[8] J. Zhao, J-G. Jiang and J-N. Liu, “Design of tunable biquadratic filters employing CCCIIs: state variable block diagram approach” Analog Integr Circ Sig Process, vol.62, 2010, pp.397–406.
[9] A. Zeki and A. Toker, "DXCCII-based tunable gyrator", International Journal of Electronics and Communications (AEÜ), vol.34(1), 2005, pp.59-62.
[10] F. Kaçar, B. Metin and H. Kuntman, “A New Dual-X CMOS Second Generation Current Conveyor (DXCCII) with a FDNR Circuit Application”, AEU: International Journal of Electronics and Communications vol.64(8), 2010, pp.774-778.
[11] S. Minaei and E. Yüce “A new full-wave rectifier circuit employing single dual-X current conveyor” International Journal of Electronics, vol.95(8), 2008, pp.777–784.
[12] S. Yamaçlı and S. Özcan, “Novel Electronically Tunable Inductance Simulator Employing Dual-X Current Conveyors (DXCCIIs)”, IASTED Conference on Circuits, Signals and Systems (CSS 2004), Clearwater, Florida, U.S.A., 2004, pp.28-30.
[13] A. Zeki and A. Toker “The Dual-X Current Conveyor (DXCCII): A New Active Device
For Tunable Continuous-Time Filters”, Int. J. Electron., vol.89, 2002, pp.913–923.
[14] E. Yüce and S. Minaei “ICCII-Based Universal Current-Mode Analog Filter Employing Only Grounded Passive Components” Analog Integr Circ Sig Process, vol.58, 2009, pp.161–169.
[15] S. Minaei “Electronically Tunable Current-Mode Universal Biquad Filter Using Dual-X Current Conveyors” Journal of Circuits, Systems, and Computers, vol.18(4), 2009, pp.665–680.
[16] F. Kaçar, and H. Kuntman, “DXCCII based electronically tunable current-mode universal filter” Signal Processing and Communications Applications Conference, SIU 2009. IEEE 17th, pp.157 – 160.

Thank you for copying data from http://www.arastirmax.com