Buradasınız

IMPLEMENTATION OF THE UPFC CONTROLLER TEST EQUIPMENT

Journal Name:

Publication Year:

Author NameUniversity of Author
Abstract (2. Language): 
This paper instructs the test equipment working principle of the unified power flow controller (UPFC), determines the datum should be sampled for the controlling and recording. Designs the hardware plate-form for the controller equipment. The plate-form is composed by controlling unit, supervising unit and recording unit. The test results, which based on the designed plat-form demonstrate, the implemented equipment can correspond to the power system variations smoothly and efficiently.
617-620

REFERENCES

References: 

[1] C. Schauder, L. Gyugyi, E. Stacey, M.Lund,
AEP UPFC project: installation,
commissioning and operation of the ±160MVA
statcom (phase I) [J]. IEEE Transactions on
Power Delivery, Vol: 13, No: 4, pp. 1530-1535,
1998.
[2] Manzar Rahman, Mohammed Ahmed,
Richard Gutman, “UPFC Application on the
AEP System: Planning Considerrations”. IEEE
Transactions on Power Systems, Vol. 12, No. 4,
P1695-1701. November 1997.
[3] Tan Weipu, He Renmu, Yang Yihan, Liu
Zhuo, Application of Digital Signal Processor
on UPFC Experimentation Device [J]. Power
System Technology, Vol: 23, No: 8, pp. 17-20,
1999.
[4] N. Dizdarevic, S. Tesnjak, G. Andersson,
IMPLEMENTATION OF THE UPFC CONTROLLER TEST EQUIPMENT
Aihong TANG, Xie Ping
620
“Converter Rating Powers of Unified Power
Flow Controller”. IEEE proceedings, P603-609.
2002.
[5] Tang Aihong, Cheng Shijie, etal. Design of
Parameters of UPFC Equipment [J]. High
Voltage Engineering. Vol: 31, No: 6, pp. 63-65,
2005.
[6] Aihong TANG, Shijie CHENG. Study of the
Impacts of UPFC Upon Dynamic Power
Quality [J]. Istanbul University-Journal of
Electrical&Electronics Engineering, Vol: 5, No:
1, pp.1239-1240, 2005.
[7] Tang Ai-hong, Cheng Shi-jie. DYNAMIC
SIMULATION MODEDL OF UNIFIED
POWER FLOW CONTROLLER BASED ON
PSCAD/EMTDC [J]. Power system
technology, Vol: 29, No: 16, pp.6-10, 2005.
Writer introduction:
Tang Aihong, PH.D candidate, engaged in the operation and control of power system.
Xie Ping, Engineer, engaged in computer control and datum management.
Postal address: The School of Automation, Wuhan University of Technology, Hubei, Wuhan, P. R.
China. 430070
Tel: 13886022424
E-mail: [email protected]

Thank you for copying data from http://www.arastirmax.com